In Situ Control of Oxygen Vacancies in TaOx Thin Films via Plasma-Enhanced Atomic Layer Deposition for Resistive Switching Memory Applications.

The plasma-enhanced atomic layer deposition (PEALD) process using Ta(OC2H5)5 as a Ta precursor and plasma-activated hydrogen as a reactant for the deposition of TaOx films with a controllable concentration of oxygen vacancies (VO) is reported herein. The VO concentration control was achieved by varying the hydrogen volume fraction of the hydrogen-argon mixture in the plasma, allowing the control of the leakage current density in the tantalum oxide films within the range of 5 orders of magnitude compared with the Ta2O5 film grown via thermal ALD using the identical Ta precursor and H2O. Temperature-dependent current-voltage measurements combined with Poole-Frenkel emission modeling demonstrated that the bulk trap depth decreases with the increasing hydrogen volume fraction, which could be attributed to the increase of the VO concentration. The possible chemical change in the PEALD TaOx films grown under different hydrogen volume fractions was confirmed by the in situ X-ray photoelectron spectroscopy (XPS) measurements of the Ta 4f core and valence band spectra. The comparison of the XPS-measured nonstoichiometry and the secondary ion mass spectrometry analysis of the hydrogen content allowed this study to conclude that the nonstoichiometry is largely related to the formation of Ta-VO sites rather than of Ta-H sites. Such oxygen-deficient TaOx layers were studied for application as an oxygen-deficient layer in a resistance switching random access memory stack (Ta2O5/TaOx) where the actual switching occurred within the stoichiometric Ta2O5 layer. The bilayer memory stack showed reliable resistance switching up to ∼106 switching cycles, whereas the single-layer Ta2O5 memory showed only several hundred switching cycles.