Maximal sfermion flavour violation in super-GUTs.

We consider supersymmetric grand unified theories with soft supersymmetry-breaking scalar masses [Formula: see text] specified above the GUT scale (super-GUTs) and patterns of Yukawa couplings motivated by upper limits on flavour-changing interactions beyond the Standard Model. If the scalar masses are smaller than the gaugino masses [Formula: see text], as is expected in no-scale models, the dominant effects of renormalisation between the input scale and the GUT scale are generally expected to be those due to the gauge couplings, which are proportional to [Formula: see text] and generation independent. In this case, the input scalar masses [Formula: see text] may violate flavour maximally, a scenario we call MaxSFV, and there is no supersymmetric flavour problem. We illustrate this possibility within various specific super-GUT scenarios that are deformations of no-scale gravity.

Introduction

Ever since the earliest days of supersymmetric model-building, it has been emphasised that data on flavour-changing processes suggest the existence of a ‘super-GIM’ mechanism to ensure that the effective electroweak-scale slepton and squark mass matrices are almost diagonal with small generational mixing and eigenvalues that are almost degenerate [1]. This constraint on supersymmetric model-building has subsequently been dubbed the ‘supersymmetric flavour problem’. Soon after [1], it was recognised that one possible scenario for solving this ‘problem’ in the squark sector would be to postulate that all supersymmetric flavour violation is proportional to the Cabibbo–Kobayashi–Maskawa (CKM) mixing between quarks [2], a scenario that has come to be known as minimal flavour violation (MFV). This approach left open the question how MFV came to be, one possible answer being provided by gaugino mediation of supersymmetry breaking [3-5].

A suitable framework for studying the supersymmetric flavour problem is provided by a supersymmetric GUT such as SU(5) [6, 7] in which the soft supersymmetry-breaking scalar masses , the trilinear soft supersymmetry-breaking parameters and the gaugino masses are input at the GUT scale  GeV. Upper limits on the deviations from Standard Model predictions for flavour-changing processes motivate the hypothesis that the parameters for chiral supermultiplets with the same gauge quantum numbers are identical at this input scale [2], and the GUT symmetry requires them to be identical for all the sparticles in the same GUT multiplet. Thus, in SU(5) all the sfermions would have a common , and all the sfermions would have another (potentially different) common . It is often assumed, with no clear phenomenological motivation apart from simplicity and possible embedding in a larger supersymmetric GUT such as SO(10), that these two parameters are identical at the GUT scale, a scenario called the constrained minimal supersymmetric extension of the standard model or CMSSM [8-25].

The question remains, however, what might be the origin of any such universality in the parameters. This would occur in minimal supergravity models with trivial, flat Kähler metrics [26], but would not happen in more general supergravity models [27], as discussed recently in the context of compactified M-theory [28]. One interesting exception is no-scale supergravity [30, 31], in which the input soft supersymmetry-breaking scalar masses vanish at the input scale. In this case, the electroweak-scale soft supersymmetry-breaking scalar masses are all generated by gauge interactions, and hence are identical for different sparticles with the same gauge quantum numbers, in a manner reminiscent of gauge-mediated supersymmetry-breaking models [32]. The phenomenological constraints on sparticle masses exclude models with no-scale boundary conditions at the supersymmetric GUT scale [33], but no-scale boundary conditions at higher input scales may be acceptable [33-35].

The principal purpose of this paper is to study the constraints on the flavour structure of the soft supersymmetry-breaking scalar masses for models that are similar to such no-scale models, with at some input scale , scenarios we call super-GUTs. One may regard such scenarios as deformations of the simple no-scale framework, as might occur in realistic string models via higher-order corrections to the (over-simplistic?) no-scale Kähler potential, cf, the studies in [28]. Intuitively, it is clear that the constraints on the non-universalities between the diagonal parameters and on the ratios of off-diagonal to diagonal entries in the soft supersymmetry-breaking scalar mass matrix must become progressively weaker as the no-scale limit: is approached.

Indeed, close to this no-scale limit a completely anarchic matrix is allowed. In this sense, we consider possible anarchic structures which we term as maximal flavour violation (MaxSFV). Thus, there is no ‘supersymmetric flavour problem’ for super-GUTs with input boundary conditions at some scale that are small deformations of the idealised no-scale limit. A primary objective of this paper is to quantify this statement within illustrative super-GUT scenarios.

The effects of flavour-violating sfermion mass parameters on hadronic and leptonic flavour observables, as well as their correlations, have been studied previously in the context of Grand Unified Theories. These studies typically assume the mass-insertion approximation without a complete top-down running of the soft supersymmetry-breaking parameters (see, e.g., [29]). We do not strive to study the generalities of such correlations, instead we consider a specific set up where we establish limits on the maximal values of the off-diagonal entries in the matrix using a complete running of soft supersymmetry-breaking parameters. Also, we constrain the parameter space via EW observables as well as flavour-violating effects. To our knowledge, this is the first complete and realistic study that takes into account running from a scale above the unification scale.

The organisation of this paper is as follows. We begin in Sect. 2 by setting up our super-GUT model framework [33, 34, 36–41], focusing in particular on its implementation in no-scale supergravity [34]. We use weak-scale measurements to specify the gauge and Yukawa couplings, whereas the soft supersymmetry-breaking scalar masses, trilinear and bilinear terms are specified at the input scale, . The matching conditions at are discussed in Sect. 2.3. We then specify in Sect. 2.4 the illustrative flavour-mixing models that we choose for further study. In Sect. 3 we analyse the case of pure no-scale boundary conditions, in which all soft supersymmetry-breaking scalar masses, trilinear and bilinear terms are set to zero at . We display the running of these parameters as well as the Yukawa couplings between the input and weak scales for our representative flavour-mixing scenarios. Then, in Sect. 4, we analyse super-GUT scenarios in which , studying the upper bounds on non-universality in that are permitted by the experimental upper limits on flavour-changing interactions as functions of in our illustrative flavour-mixing scenarios. Finally, Sect. 5 summarises our conclusions.

Model framework

No-scale SUGRA model

We first consider a low-energy effective theory that is based on an supergravity model with the simplest no-scale structure [30, 31] defined by a Kähler potentialwhere T is a modulus field and represents matter fields present in the theory. The no-scale form (1) for K ensures that all soft supersymmetry-breaking scalar masses and bi- and trilinear terms vanish at some input universality scale, . However, we recall that non-zero gaugino masses arise independently from a non-trivial gauge kinetic function in the effective supergravity theory. It is well known that vanishing soft masses at the GUT scale in a theory with universal gaugino masses are in general phenomenologically disastrous [33]. However, this problem may be circumvented if the input universality scale is between the GUT scale and the Planck scale [33-35].

A Kähler potential of the form (1) arises in generic manifold compactifications of string theory, in which T is identified as the manifold volume modulus. In such a scenario, the are identified as untwisted matter fields. In general there would, in addition, be twisted matter fields described by additional terms in the Kähler potential of the formwhere the parameters are model-dependent modular weights. These give rise to -dependent soft supersymmetry-breaking terms whose magnitudes and flavour structure are also model-dependent and violate the MFV assumption, in general. Here, we assume that the MSSM matter fields are assigned to the untwisted sector.

The renormalisation of MSSM parameters at scales above requires the inclusion of new particles and parameters in addition to those in the generic MSSM, including GUT-scale Higgses, their self-couplings and couplings to matter. For simplicity, we assume here minimal SU(5), in which one introduces a single SU(5) adjoint Higgs multiplet , and the two Higgs doublets of the MSSM, and , are extended to five-dimensional SU(5) representations and , respectively. The minimal renormalisable superpotential for this model is [40, 42, 43]where Greek letters denote SU(5) indices, are generation indices and is the totally antisymmetric tensor with . The and superfields of the MSSM reside in the representations, , while the and superfields are in the representations, . The new dimensional parameters and are of . The soft supersymmetry breaking part of the Lagrangian involving scalar components of chiral superfields can then be written aswhere the soft parameters are assumed to be of the same order as and , and hence of .

Boundary conditions at

The no-scale structure (1) requires that all supersymmetry-breaking soft masses and bi- and trilinear terms for the fields vanish at , so thatwhere the bilinear couplings and in (4) are related to the corresponding superpotential terms byand the trilinear couplings and in (4) are related to the corresponding Yukawa couplings by

where no summation over repeated indices is implied. Having specified the boundary conditions on scalar masses as well as setting , we no longer have the freedom of choosing as a free parameter. Instead, the minimisation of the Higgs potential provides the solutions for both the MSSM Higgs mixing parameter and  [44]. Thus the theory is defined by 4 parameters:where we will denote the gaugino mass above the GUT scale by . In addition, the sign of the MSSM parameter must also be specified.1

In the previous subsection, we specified the boundary conditions on the soft supersymmetry-breaking parameters at the input universality scale . Using the GUT RGEs, these are run down to where they must be matched with their MSSM equivalents. At the GUT scale, we haveWe treat the gauge and Yukawa couplings differently, inputting their values at the electroweak scale and matching to their SU(5) counterparts at . The minimal SU(5) relationsbetween the charged-lepton and for the down-type Yukawa couplings are unrealistic since they do not produce the right values of lepton masses at , except possibly for the third generation. We assume here that at but we do not match to at . Instead we use the values that should have at in order to produce the observed lepton masses. One way to justify this assumption would be to allow the lepton sector to have additional, non-renormalisable couplings besides the minimal renormalisable couplings [46], so at one haswhere these other interactions are too small to be important for the quark sector. Thus for the gauge and Yukawa couplings, we determine their SU(5) counterparts asThe corresponding experimental inputs for the Yukawa couplings at the weak scale are shown in Table 1.

Table 1

Values of the fermion masses, in GeV, as appear in current edition of the PDG review [47]. The quoted quark mass values at were obtained with the program RunDec [48]. The values of the charged-lepton masses were taken from [49]

	Mass values (GeV)	mfMS¯(M_Z)(GeV)
m_t	173.21±0.51±0.71	171.46±0.96
m_b	4.18±0.03	2.85±0.04
m_c	1.275±0.025	0.63±0.025
m_s	0.095±0.005	0.059±0.0033
m_d	4.8-0.3+0.5×10^-3	0.0028±0.0004
m_u	2.3-0.5+0.7×10^-3	0.0013±0.0005
m_e	(0.51±(1.1×10^-8))×10^-3	(0.49±(4.2×10^-8))×10^-3
m_μ	(105.66±(3.5×10^-6))×10^-3	(102.72±(9.2×10^-6))×10^-3
m_τ	1.78±(1.2×10^-4)	1.75±(2×10^-4)

We use for our renormalisation-group calculations the program SSARD [50], which computes the sparticle spectrum on the basis of 2-loop RGE evolution for the MSSM and 1-loop evolution for minimal SU(5). We define as the scale where , so that  GeV, with its exact value depending on the values of other parameters. The value of at is within the threshold uncertainties in the GUT matching conditions.

Non-zero off-diagonal Yukawa couplings

It is well known that renormalisation interrelates the soft masses-squared, trilinear and Yukawa couplings. In particular, a non-zero diagonal soft mass-squared term, the Kähler potential, the F terms and the Yukawa couplings could be seeds for non-zero off-diagonal soft masses-squared and trilinear terms. Alternatively, even if the Yukawa couplings were flavour-diagonal, there would be non-diagonal soft masses-squared and trilinear terms if the Kähler potential [28] or the F terms were flavour non-diagonal.

However, in the case of no-scale supergravity boundary conditions at there is no source of non-zero trilinear or soft masses-squared, apart from the running induced by the renormalisation-group functions. However, off-diagonal Yukawa couplings at would generate, via renormalisation-group running, off-diagonal soft masses-squared and trilinear terms. The ultimate goal of our study is to quantify how large these parameters could be near before they become problematic at .

In order to understand the effects of the Yukawa couplings on the evolution of the soft supersymmetry-breaking parameters, we initialise our study by enforcing conditions at that reproduce the CKM matrix. In particular, we take the values of the quark masses at to be those at (see the second column of Table 1), and use and . The diagonalisation of the Yukawa couplings is defined bywhere and are diagonal matrices, and the unitary matrices are such that the CKM matrix is .

Since the structure of the Yukawa couplings cannot be determined in a model-independent way, we adopt the minimal assumption that the CKM matrix is the only source of flavour violation in the Yukawa couplings in the D sector, and study the differences induced by different assumptions for the E sector. Thus, we are assuming that is diagonal at . Using this condition, 1-loop running does not generate off-diagonal terms, and the off-diagonal entries generated at at the 2-loop level are negligibly small.

We remind the reader that, in contrast to the Standard Model, the MSSM observables are sensitive to right-handed currents, which have no Standard Model counterparts. Therefore, it is not possible to make predictions without additional assumptions2 on the Yukawa couplings, and hence the as well as the .

We therefore consider the following illustrative Ansätze that illustrate the range of possibilities: The Ansätze A3 and A4 are compatible with the minimal SU(5) conditions (10) and (14). However, we will focus later on Ansätze A1 and A2 because, as we shall see, Ansätze A3 and A4 give rise to unacceptably large flavour-violating processes in the lepton sector. We use examples A1 and A2 to illustrate the determination of the diagonal and off-diagonal soft masses-squared and trilinear terms that are generated below . These are constrained by flavour observables, and our goal is to determine how large the deviations from pure no-scale boundary conditions can be, before they induce flavour violations in contradiction with experiment.

Running of parameters

In this section, we restrict our attention to pure no-scale boundary conditions, and assume the Ansatz A1 for the CKM mixing among fermions. As already mentioned, the boundary conditions for the soft supersymmetry-breaking parameters are fixed at , the gauge and Yukawa couplings are fixed at the weak scale, and all parameters are matched at to allow for running above and below the GUT scale. Though the off-diagonal sfermion masses begin their RGE evolution with the no-scale boundary conditions, i.e., they vanish at , they contribute to low-energy flavour observables in a model-dependent way after renormalisation, as we now calculate.

To be concrete, we choose a limited set of benchmark points with different choices of , and (all masses are expressed in GeV units). The four-dimensional parameter space of the super-GUT no-scale model was explored in [34]. It was found that unless with , both and are pushed to relatively low values. However, the low values of are now in conflict with LHC searches for supersymmetric particles [52-54]. Therefore we restrict our analysis to an illustrative benchmark point B defined bysuggested by a no-scale model [35] in which the right-handed sneutrino is responsible for Starobinsky-like inflation. The value of is chosen so that we obtain the relic abundance corresponding to the cold dark matter density determined by Planck and other experiments [55]. As noted earlier, after setting , we no longer have the freedom of choosing as a free parameter. For benchmark B, we find . The value of is large enough to satisfy LHC bounds from supersymmetric particle searches and the lightest Higgs mass is GeV when calculated with the FeynHiggs code [56-59], which is comfortably consistent with the joint ATLAS and CMS measurement of  [60]. It is important to compare correctly theoretical predictions of with its experimental value, as was reviewed in [61]. In particular, one should compare the “untagged” computed value, instead of the tagged one, to its experimental counterpart. The relevance of this comparison for some supersymmetric scenarios was studied in [62], where it was pointed out that this difference is important for evaluating the validity of some scenarios. Using the SUSY_FLAVOR code [63-65] and the latest hadronic observables, we find that for the benchmark point under consideration the tagged value is , whilst using a modified version of the SUSY_FLAVOR code we find that the untagged value is . Because is relatively high for this benchmark point, the branching ratio of is somewhat large, but within the experimental 95 % CL upper limit [66, 67].

Runnings of SU(5) parameters

As already emphasised, the soft supersymmetry-breaking mass parameters are zero at the input scale in a no-scale model, but running between and leads in general to non-zero masses for both diagonal and non-diagonal elements. In particular, the latter are induced by the non-diagonal Yukawa couplings assumed in Ansatz A1. The runnings of the Yukawa couplings for benchmark B are shown in Fig. 1. Recall that we have assumed diagonal Yukawa matrices for the up-quark sector and the 10 of SU(5), and therefore we show only the evolution of the real part of . In contrast, for the of SU(5), the Yukawa matrices are determined from (14) using Ansatz A1. Note that, with this definition, these Yukawa matrices are in general not symmetric (though the runnings of and are indistinguishable in the figure). The figure shows the runnings of the Yukawa couplings from the input scale ( for benchmark B) down to the GUT scale ().

Fig. 1

The runnings of the Yukawa couplings from to for the benchmark point , using the patterns specified via Ansatz A1. Note that the lines for and lie on top of each other

The running of the soft scalar masses is shown in Fig. 2, where we have again assumed benchmark point B and ansatz A1. The top panels show the running of the diagonal soft masses for the 10 and of SU(5). The middle panels show the real parts of the off-diagonal entries, and the bottom panels show the imaginary parts of the same off-diagonal entries (as these are hermitian quantities, information on the transposed entries are already given by the real and imaginary parts). All of the squark masses begin their evolution with at . The running of the diagonal components is driven by the value of the gaugino mass, here set at  GeV. We clearly see from Fig. 2 that the off-diagonal elements of the squark mass matrices induced by the non-diagonal Yukawa matrices remain very small after we have imposed the no-scale boundary conditions: we find , , while and are of order and GeV, respectively. Later we will use this evolution to place constraints on the size of the possible sizes of the off-diagonal elements at .

Fig. 2

The runnings of diagonal (left) and off-diagonal (right) soft masses-squared associated with the 10 (left) and (right) representations in the SU(5) model between and for the benchmark point (in units of GeV) using Ansatz A1 for the Yukawa couplings

Running of MSSM parameters

The matching of couplings and masses at , using (9), is made in the basis where the Yukawa couplings are not diagonal, i.e., we assume ansatz A1. The transformations to the super-CKM (SCKM) basis, where the Yukawa couplings are diagonal, are given bywhere the matrices () are defined in (14) and the are the fermion masses, . We could also define , but we are taking to be diagonal. We note that SU(2) invariance in the SCKM basis is preserved trivially, because then = and so . A more complete set of transformation rules are given in Appendix B. The choice of the Ansatz in Eqs. (15)–(18) induces off-diagonal entries at in the SCKM basis, which are constrained by flavour-violating processes. In particular, for Ansätze 3 and 4, we find that is too large and, in addition, for Ansatz 4 some electric dipole moments (EDMs) are too large. On the other hand, both the Ansätze A1 and A2 induce acceptable amounts of flavour violation. Ansatz 1 is interesting because both the right- and left-diagonalisation matrices are CKM-like. We plot the runnings of the MSSM soft-squared parameters for this Ansatz in Figs. 3, 4 and 5.

Fig. 3

The runnings of soft-squared masses for the MSSM parameters for Ansatz A1. The horizontal axis is , and the vertical axis shows the mass-squared in units of [GeV]. For the diagonal soft-squared masses, the split between first and second generation is not appreciable on the scale of the plot. In each panel we show the runnings of , , , , , , , and . The red lines in the plots run from the input scale, , down to (with the appropriate matching at ) and are given in the basis where Yukawa couplings are not diagonal. The blue crosses show the result (at the electroweak scale) of running in the basis where the Yukawa matrices are diagonal. The states labelled without a hat are the states given in the basis where Yukawa couplings are not diagonal. The SU(5) parameters were specified in the basis where the Yukawa couplings are not diagonal

Fig. 4

As in Fig. 3, but for , , , , , , and . The horizontal axis is again

Fig. 5

As in Fig. 4 but now for , and , . The horizontal axis is again

We plot in the first panel of Fig. 3 the running of some squark soft masses-squared. The horizontal axis is , and the red curves represent the evolution of states in the basis where Yukawa couplings are not diagonal. That is, starting with our boundary conditions: at , the sfermion masses are run down to where they are matched to the MSSM sfermion masses. As the running to has induced some off-diagonal entries, these are also run down to the weak scale (). This running is shown by the set of red curves. For example, at the electroweak scale, the running of the diagonal left-handed squark masses-squared reaches GeV, while reaches GeV. The split between the first and second generation is not appreciable on the scale displayed on the plot. We can diagonalise the mass matrices at the weak scale using (20) with the V’s defined by A1. That result is shown by the blue crosses. In the upper left panel it makes no difference whether we run in the diagonal (SCKM) basis (20) or in the non-diagonal Yukawa basis, as the blue crosses sit at the endpoint of the red curves.

In the second to sixth panels, we show the running of , , , , , , and .

We again show as blue crosses the endpoints of the running at the weak scale when the states are in the basis where Yukawa couplings are diagonal. The positions of these show the impact of the changes in size of off-diagonal parameters. We see that the blue crosses differ only slightly from the running shown by the red curves for the imaginary parts of and . Since the Yukawa couplings are chosen to be diagonal for U, the blue crosses are found at the endpoints of the red curves in these cases.

In Figs. 4 and 5 we show the same for the runnings of , , , , , , , , and , . We do not show the runnings of , and because, given the matching conditions at , (9), and the fact that in the E and U sectors the Yukawa couplings are chosen to be diagonal, their runnings are similar to , and , respectively.

As one can see in Figs. 4 and 5, there is considerably less running for the (12) components of the squark mass matrices. For the (13) sectors, looking at Fig. 5, we find that, depending on the sector, the running can be more or less important. As expected for , the running is negligible because in this sector the Yukawa couplings are chosen to be diagonal. Note that, due to the CP-violating phase of the CKM, the running of the imaginary parts of and become appreciable. In the D sector, however, once the SCKM transformations, (20), are taken into account, some of the CP violation is rotated away, as a result of the first condition of Ansatz 1, (15).

Flavour-violating parameters

We define the flavour-violating parameterswhere the mass matrices appearing on the right-hand side of the equation are defined in (20) and . Flavour-violating parameters are often defined in the absence of a particular model in which the running can be performed explicitly. However, general limits on flavour-violating parameters cannot be obtained, because the forms in which they enter into observables are in general quite model-dependent; see for example [68, 69]. There are dependences both on the mass scales of the supersymmetric particles involved in a particular process – in a particular model not all the supersymmetric particles may be relevant – and on the specific underlying flavour framework. However, a few observables can severely constrain the parameters of (21) and give clean bounds on them, particularly for the sleptonic parameters. They still depend on the mass scale and assumptions of the underlying flavour model, but can be used as an indication, provided the model satisfies the conditions under which the bounds are derived. In particular, in [70] we find a set of conditions compatible with our assumptions, and we use them to compare to the lepton-flavour-violating parameters of (21).

The main purpose here in using the parameters of (21) is to compare our different models and to examine the different runnings and the contributions from the different sectors to a particular observable. Using the bounds of [70], we make comparisons and comment on cancellations in the models.

Comparison between A1 and A2

The only difference between A1 and A2 is in the D-quark sector, Eqs. (15)–(18), so we concentrate our comparison on the D-squark sector (left and right). Our interest in comparing these Ansätze is to assess the relevance of switching off (A2) the effect of the CKM matrix in the right-handed D sector, and to check potential differences in the observables. The runnings of the flavour-violating parameters from the GUT scale to the weak scale is shown in Figs. 6 and 7 for models A1 and A2. At , the initial values for most of the parameters are quite similar for both these Ansätze. In some cases the sign differs, but they have a comparable absolute value.

Fig. 6

Comparison of the runnings of the D-quark flavour-violating parameters for A1 (left panels) and A2 (right panels), for , ,

Fig. 7

Comparison of the runnings of the D-quark flavour-violating parameters for A1 (left panels) and A2 (right panels), for ,

The parameters that differ the most are the LR flavour-violating parameters in the (13) flavour sector, as can be seen from Tables 2 and 3. The behaviours of the real and imaginary parts are plotted in Fig. 7, notice the different scales of the plots. The differences between Ansätze A1 and A2 are to be expected, as they arise from the different choices for . Looking at the terms that enter into the beta function of , shown in (37) in Appendix B, we see that all terms involving are sensitive to the change of , which affect directly the LR parameters. In contrast, we see from (36) of Appendix B that only some of the soft mass-squared transformations that contribute to the LL and RR parameters are sensitive to the choice of . As a result, we do not expect the flavour-violating parameters coming entirely from the soft masses-squared to be very sensitive to the change of . Indeed, looking at Tables 2 and 3, we see that the difference is at most one order of magnitude in the (13) RR and LL sectors for A1 and A2. In the (12) sector, we again see the strong dependence on in the LR parameters and relatively small changes in the RR and LL parameters. In the (23) sector, none of the terms are greatly affected by the choice of . Because of the difference between the Yukawa couplings and , the parameters and will have different values at the EW scale, but their absolute values are similar because their runnings are dominated by the largest Yukawa coupling, i.e., terms in (37), and contain elements. This is not the case for the lighter sectors, because their Yukawa couplings are smaller. By way of comparison, we plot the runnings of some of the (12) flavour parameters in Fig. 6.

Table 2

Comparison of the real parts of the D-squark parameters in Ansätze A1 and A2

	A1	A2	Bound (Process) [71]
Re[(δ12D)_RR]	- 8×10^-7	- 2×10^-7	10^-2 (ΔM_K)
Re[(δ12D)_LL]	5×10^-5	8×10^-5	10^-2 (ΔM_K)
Re[(δ12D)_{LR,RL}]	3×10^-7	- 5×10^-11	–
Re[(δ21D)_{LR,RL}]	3×10^-7	3×10^-7	–
Re[(δ13D)_RR]	- 6×10^-5	- 2×10^-6	–
Re[(δ13D)_LL]	- 1×10^-3	- 2×10^-3	–
Re[(δ13D)_{LR,RL}]	5×10^-7	9×10^-10	–
Re[(δ31D)_{LR,RL}]	- 5×10^-7	- 5×10^-7	–
Re[(δ23D)_RR]	3×10^-4	- 8×10^-3	10^-2 (BR(B_s→μ^+μ^-))
Re[(δ23D)_LL]	7×10^-3	1×10^-2	10^-2 (BR(B_s→μ^+μ^-))
Re[(δ23D)_{LR,RL}]	- 2×10^-6	- 3×10^-6	–
Re[(δ32D)_{LR,RL}]	2×10^-6	2×10^-6	–

Table 3

Comparison of the imaginary parts of the D-squark parameters in Ansätze A1 and A2. The bounds on the imaginary parts in these scenarios cannot be taken directly from the literature, but must instead be constructed from different observables (see Sect. 3.4)

	A1	A2
Im[(δ12D)_RR]	-3×10^-7	2×10^-7
Im[(δ12D)_LL]	2×10^-5	3×10^-5
Im[(δ12D)_{LR,RL}]	-2×10^-8	-2×10^-11
Im[(δ21D)_{LR,RL}]	5×10^-9	1×10^-8
Im[(δ13D)_RR]	3×10^-5	6×10^-6
Im[(δ13D)_LL]	-6×10^-4	-6×10^-4
Im[(δ13D)_{LR,RL}]	4×10^-7	4×10^-10
Im[(δ31D)_{LR,RL}]	-1×10^-8	-1×10^-8
Im[(δ23D)_RR]	1×10^-5	2×10^-6
Im[(δ23D)_LL]	-1×10^-4	-1×10^-4
Im[(δ23D)_{LR,RL}]	8×10^-8	3×10^-9
Im[(δ32D)_{LR,RL}]	-5×10^-8	-5×10^-8

Due to the running of the beta function due in particular to the third and fourth terms in (37), will not evolve symmetrically even if is symmetric, and thereforeIf, in addition, is not symmetric (as in Ansatz A2), this effect can be quite noticeable (in particular for , , and ). However, the behaviours of the other flavour-violating parameters tells us that their evolutions in the SCKM basis do not differ too much, which is explained by the forms of the transformations in (36), so we have not plotted them in Figs. 6 and 7. The order-of-magnitude differences in the real and imaginary parts of are given in Tables 2 and 3, respectively.

Comparison between A1 and A4

The difference between A1 and A4 is due to the replacement of by , so we expect a significant increase in the leptonic L, R flavour-violating parameters, as they are directly linked to the trilinear couplings, which are enhanced by the running of the Yukawa couplings.

From Table 4 we can see that this is the case for all the real parts of the flavour-violating parameters, specially for for . This can again be understood in terms of the evolution of the different terms entering into the beta function of the E trilinear terms. These have the same form of (37) with the replacement , and no analogous U terms since we are not considering neutrinos. We can see that in general all flavour-violating parameters coming entirely from the soft-squared masses (i.e., RR and LL) have a milder change than from the counterparts, as expected from the analogous form of the terms entering into the beta function (analogous to (36) with the proper replacements).

Table 4

Comparison of the real parts of the leptonic parameters in Ansätze A1 and A4

	A1	A4	Bound (Process) [70]
Re[(δ12E)_RR]	-1×10^-6	2×10^-3	10^-3 (μ→eγ)
Re[(δ12E)_LL]	-2×10^-6	6×10^-4	10^-5 (μ→eγ)
Re[(δ12E)_{LR,RL}]	4×10^-12	-7×10^-5	10^-5 (μ→eγ)
Re[(δ21E)_{LR,RL}]	2×10^-9	-7×10^-5	10^-5 (μ→eγ)
Re[(δ13E)_RR]	-1×10^-5	-5×10^-3	10^-2 (τ→eγ)
Re[(δ13E)_LL]	-2×10^-5	-2×10^-3	10^-3 (τ→eγ)
Re[(δ13E)_{LR,RL}]	5×10^-11	-8×10^-5	10^-2 (τ→eγ)
Re[(δ31E)_{LR,RL}]	3×10^-9	-9×10^-5	10^-2 (τ→eγ)
Re[(δ23E)_RR]	-5×10^-4	2×10^-2	10^-2 (τ→μγ)
Re[(δ23E)_LL]	-6×10^-4	7×10^-3	10^-2 (τ→μγ)
Re[(δ23E)_{LR,RL}]	0	5×10^-4	10^-2 (τ→μγ)
Re[(δ32E)_{LR,RL}]	0	5×10^-4	10^-2 (τ→μγ)

For A4, the parameter exceeds the limit of the general analysis of [70], and most of the other parameters are at their limits. The different orders of magnitude of the real and imaginary parts of are given in Tables 4 and 5, respectively.

Table 5

Comparison of the imaginary parts of the leptonic parameters in Ansätze A1 and A4

	A1	A4
Im[(δ12E)_RR]	9×10^-7	-5×10^-5
Im[(δ12E)_LL]	1×10^-6	7×10^-4
Im[(δ12E)_{LR,RL}]	-4×10^-12	-6×10^-7
Im[(δ21E)_{LR,RL}]	2×10^-9	-6×10^-6
Im[(δ13E)_RR]	4×10^-5	4×10^-4
Im[(δ13E)_LL]	-5×10^-4	-3×10^-3
Im[(δ13E)_{LR,RL}]	-2×10^-10	4×10^-6
Im[(δ31E)_{LR,RL}]	3×10^-5	2×10^-4
Im[(δ23E)_RR]	5×10^-6	6×10^-5
Im[(δ23E)_LL]	6×10^-6	-8×10^-4
Im[(δ23E)_{LR,RL}]	0	9×10^-7
Im[(δ23E)_{LR,RL}]	0	4×10^-5

In Fig. 8 we compare the runnings of the E-lepton flavour-violating parameters for A1 (left panels) and A4 (right panels), for , , and , . Although the transformation to the SCKM basis, where flavour-violating parameters are computed, has the effect of cancelling partially the effect of the running of soft-squared masses, it is not enough to suppress sufficiently , and in fact there is a significant increase in and with respect to Ansatz A1; see Tables 6–7.

Fig. 8

Comparison of the runnings of the E-lepton flavour-violating parameters for A1 (left panels) and A4 (right panels), for , , and ,

Table 6

Comparison of the predictions for Ansätze A1 and A2 with the experimental values. The values have been obtained with the SUSY_FLAVOR code. Without flavour violation, we obtain . The value in the table, which includes flavour violation, is consistent with experiment within , taking into account the Standard Model uncertainty of . The NNLO Standard Model value of is . See Sect. 3.4 for notes regarding the values of and

Relevant observables for A1 and A2
	Experimental values
EDMs (e cm)		A1	A2
Electron EDM	8.7×10^-29 [47]	1.11×10^-30	1.19×10^-30
Muon EDM	-(0.1±0.9)×10^-19 [47]	3.49×10^-30	3.63×10^-30
Tau EDM	-1.27×10^-25	6.92×10^-30	7.13×10^-30
Neutron EDM	<2.9×10^-26 [48] O(10^-28) [73]	-1.17×10^-28	-7.18×10^-29
M. Anomalies
Δa_e	8.2×10^-13 [74]	1.43×10^-14	1.43×10^-14
Δa_μ	(2.87±0.80)×10^-8	6.15×10^-10	6.16×10^-10
Δa_τ	(-5.3×10^-2,1.2×10^-3)	1.80×10^-7	1.80×10^-7
l^j→l^iγ decays
BR(μ→eγ)	5.7×10^-13 [75]	5.3×10^-16	5.4×10^-16
BR(τ→eγ)	3.3×10^-8 [76]	1.2×10^-13	1.2×10^-13
BR(τ→μγ)	4.4×10^-8 [76]	6.0×10^-12	6.2×10^-12
B decays
BR(B_s→μ^+μ^-)	(2.9±0.7×10^-9) [66]	3.4×10^-9	3.4×10^-9
Untagged		3.75×10^-9	3.76×10^-9
BR(B_d→μ^+μ^-)	(3.6-1.4+1.6)10^-10 [66]	1.1×10^-10	1.0×10^-10
BR(B_s→μ^+e^-)	2.0×10^-7	2.09×10^-27	2.13×10^-27
BR(B→τν)	(1.20±0.25)×10^-4	7.43×10^-5	7.43×10^-5
BR(B→X_sγ)	(3.55±0.24±0.09)×10^-4 [77]	3.92×10^-4	3.92×10^-4
ν Kaon decays
BR(KL0→π^0νν)	2.6×10^-8	2.32×10^-11	2.32×10^-11
BR(K^+→π^+νν)	(1.7±1.1)×10^-10	7.64×10^-11	7.64×10^-11
KKmixing
|ϵ_K|	(2.223±0.010)10^-3	1.81×10^-3	1.81×10^-3
Δm_K (GeV)	(3.63±0.0059)×10^-15	2.63×10^-15	2.63×10^-15
BB mixings
Δm_B_d	(3.36±1.97×10^-2)×10^-13	3.05×10^-13
Δm_B_s	(1.164±1.4×10^-3)×10^-11	0.98×10^-11

Table 7

Comparison of the predictions for our Ansätze A3 and A4 with the experimental values

Relevant observables for A3 and A4
	Experimental values
EDMs (e cm)		A3	A4
Electron EDM	8.7×10^-29 [47]	6.42×10^-28	2.7×10^-27
Muon EDM	-(0.1±0.9)×10^-19 [47]	-1.40×10^-28	-3.0×10^-27
Tau EDM	-1.27×10^-25	4.57×10^-28	3.7×10^-28
Neutron EDM	<2.9×10^-26 [48] O(10^-28) [73]	-3.59×10^-29	3.7×10^-30
M. Anomalies
Δa_e	8.2×10^-13 [74]	3.2×10^-14	1.2×10^-14
Δa_μ	(2.87±0.80)×10^-8	1.4×10^-9	6.1×10^-10
Δa_τ	(-5.3×10^-2,1.2×10^-3)	4.1×10^-7	1.8×10^-7
l^j→l^iγ decays
BR(μ→eγ)	5.7×10^-13 [75]	1.7×10^-9	7.49×10^-10
BR(τ→eγ)	3.3×10^-8 [76]	6.6×10^-13	1.02×10^-12
BR(τ→μγ)	4.4×10^-8 [76]	1.05×10^-11	1.52×10^-12
B decays
BR(B_s→μ^+μ^-)	(2.9±0.7×10^-9) [66]	3.3×10^-9	3.4×10^-9
Untagged		3.66×10^-9	3.75×10^-9
BR(B_d→μ^+μ^-)	(3.6-1.4+1.6)10^-10 [66]	1.4×10^-10	1.1×10^-10
BR(B_s→μ^+e^-)	2.0×10^-7	9.1×10^-23	2.3×10^-21
BR(B→τν)	(1.20±0.25)×10^-4	7.37×10^-5	7.43×10^-5
BR(B→X_sγ)	(3.55±0.24±0.09)×10^-4 [77]	4.22×10^-4	3.9×10^-4
ν Kaon decays
BR(KL0→π^0νν)	2.6×10^-8	2.32×10^-11	2.3×10^-11
BR(K^+→π^+νν)	(1.7±1.1)×10^-10	7.6×10^-11	7.6×10^-11
KKmixing
|ϵ_K|	(2.223±0.010)10^-3	1.82×10^-3	1.81×10^-3
Δm_K (GeV)	(3.483±0.0059)×10^-15	2.63×10^-15	2.63×10^-15

In addition, from the imaginary parts of we can get a significant contribution to the EDMs [72]. We have used the SUSY_FLAVOR code [63-65] to compute the EDMs, but we can understand easily how the imaginary parts of the flavour-violating parameters are constrained. The constrained combinations areSince A1 and A2 differ in their D sectors, a direct difference in the values of the neutron EDM is expected (as reflected in Table 6). Note that, in Fig. 9, both the real and imaginary parts of and become important. Specifically, the leading term of the imaginary part of is

Fig. 9

Contribution of flavour-violating process to the d-quark EDM

In [72] sensitivities for the quantities defined in (23) were computed using the mass-insertion approximation with a common scale for soft masses of 1 TeV. It was found, in particular, that . Since our model has specific and correlated values for the soft parameters, we can compare the impacts of and directly to the neutron EDM. We note that the imaginary parts of and in A2 found in Table 3 are approximately one order of magnitude smaller than the corresponding parameters in A1. Hence the neutron EDM is slightly decreased (by less than an order of magnitude), as seen in Table 6. Using these results, in Sect. 4 we place bounds on and by saturating the EDM bound.

Comments on the results and comparison to observables

Ansätze A1 and A2 predict acceptable flavour violation, while Ansätze A3 and A4 do not. We recall that the properties of the D and L sectors are controlled by the sector of SU(5), whereas the Q, U and E sectors are controlled by the sector. The premise of the Ansatz A4 for the Yukawa couplings, (18), was that if soft mass-squared sectors were transformed to the SCKM basis by the same transformations as the corresponding Yukawa sectors, then the off-diagonal parameters of the corresponding sectors would be suppressed because the off-diagonal elements of would be mainly rotated away with the same matrices that make the Yukawa couplings diagonal. This is largely the case for the D sector: in the cases of and , for , the rotation to the SCKM matrix produces a smaller matrix element than in the non-SCKM basis. However, this is not the case for other sectors, where too much flavour violation is produced. On the other hand, in the cases of Ansätze A2 and A1, the rotation to the SCKM basis effectively rotates away any large flavour violation.

For A1, with the sector we expected a similar behaviour (because the sector is directly linked to the diagonalising matrices of ), but the rotation away of parameters is not as successful as in the D sector (see Fig. 8). For the sectors Q, U and E, associated with the 10 sector of SU(5), which is treated as having diagonal matrices, the off-diagonal elements of for appear as a consequence of the off-diagonal elements of for . So they are not related, in principle, but since the Yukawa couplings and are related, we expected that the SCKM transformations of the soft sectors Q and E would tend also to suppress the off-diagonal elements. This is, however, not the case for them, specially for the E sector, where the off-diagonal elements may be considerably enlarged, as seen in Fig. 8.

In Tables 6 and 7 we compare the values of the relevant observables predicted by the Ansätze (15)–(18), and the corresponding current experimental values.

The CP-violating parameter could give important constraints on models where LR flavour-violating contributions are much bigger than their RR and LL counterparts: , . This is not the case in our framework, where both the real and imaginary parts of are much bigger than . Furthermore, chirality-conserving mass-insertion parameters turn out to be more stringently constrained from and  [78], which enter as combinations of the real and imaginary parts of for the combinations [79]. However, regarding , even in the Standard Model precise computations are not possible due to unknown long-distance contributions. Hence, we compare the best estimate obtained from the short-distance (SD) contributions [80], denoted by , to the experimental value, see Table 7. We see that the central value of accounts for 86 % of the experimental central value, and its uncertainty can easily account for the reported experimental value within . The value that we obtain in our model also lies comfortably within of the experimental value, taking into account the SD uncertainty. For , the SM value is , and the value that we obtain is in better agreement with the experimental value.

Beyond no-scale GUTs: maximal flavour violation

In this section we explore the possibilities for deformations of the pure no-scale boundary conditions with non-vanishing scalar masses. We study the conditions under which flavour violation could be maximal, in the sense that off-diagonal entries in the scalar mass matrices could be as large as the diagonal entries at some super-GUT input scale . We emphasise that, as in the previous section, we are not trying to explain any observed effects but rather to set limits on the sizes of the possible off-diagonal terms using current measurements. When these are as large as the diagonal terms, we are in the regime we have called MaxSFV.

This analysis builds upon that in the previous sections, in which we analysed the most powerful flavour constraints in representative no-scale SU(5) GUT scenarios. To this end, we consider scalar mass-squared matrices with universal flavour-diagonal entries and consider the effects of switching real off-diagonal real entries on, one at a time. There are in fact far too many possible parameter combinations in general. Thus, in order to see the effect of the additional (off-diagonal) parameters and to be concrete, we make some simplifying assumptions and test these one by one (in terms of generations).

Thus we consider matrices of the formandfor and , with all four parameters real. The rest of the boundary conditions at are taken to be the same as in Sect. 2.2. We start by considering separately the boundary conditions (24) and (25), treating each sector separately.

Off-diagonal entries in and

The (1, 2) sector

The inputs (24) imply the following universal matching conditions at :which will have the strongest impact on observables where , enter at one loop level. In the lepton sector, this is the case for the amplitude of the process , shown in Fig. 10. This amplitude can be written as where , is the photon polarisation vector, k and are on-shell momenta, , are spinors that satisfy the Dirac equation and . The L / R index in refers to the electron chirality. In terms of and , we haveIn fact, if is large and , the dominant contribution to is mediated by bino exchange, which is represented in the flavour basis by the mass-insertion diagrams of the second row in Fig. 10. The contributions to in the mass eigenstate basis are schematically as follows [81]:where the matrices K diagonalise the squared-mass matrices, (34). The mass eigenstate index 1 in , corresponds roughly to while the index 5 to . Analogously in , the index 4 roughly corresponds to , while the index 2 refers to , and denotes the loop function involved in each diagram. All other contributions involve higgsinos and are therefore suppressed for large . We note that in Eqs. (28), all indices give contributions to .

Fig. 10

Top loop diagram representing the transition in mass eigenstates, with being the lepton mass eigenstates, in our Ansatz 1 and , and the sleptons eigenstates, . Bottom leading contributions to in the case of large , represented in the flavour basis

When is significantly suppressed with respect to , which is our case since the seed for is , whereas the seed for is , then dominates. Its main contributions come from mass eigenstates mainly containing , and , provided that flavour-violating LR parameters are smaller than LL and RR, which is also our case. Then the most important contributions in come when , and , and for each of themwhere is a number of O(1) and is different for each of the terms above [81]. Hence, once is non-zero at the input scale, the parameter is significantly bigger at the GUT scale than in the no-scale supergravity case, and this directly impacts the increase of and hence . In the quark sector, the analogous increase of at the GUT scale will have an impact in the analogous amplitude to , that is, , but this time the Standard Model contribution to the decay will be the dominant one, with supersymmetry making only a tiny correction [82]. We observe that affects the observable because it enters through a penguin diagram with higgsinos and sleptons in the loop, but also in this case the contribution is tiny in comparison to the SM contribution [83]. Finally, and hence are affected by but in this case the contributions coming from the small flavour-violating parameters in Ansatz 1 do not have an effect, as these parameters should typically be of to have an impact in changing the values of and [79].

We plot in Fig. 11 the value of as a function of , for the three choices , GeV and GeV. In the first panel we take (), whereas in the second panel (, ). The results are quite similar, though there are differences in the supersymmetric spectra. In both cases we find that requires  GeV for small . This means that flavour violation among the scalar masses-squared in the (1, 2) sector could be maximal, i.e., , if the universal diagonal entry  GeV. As one would expect, larger values of would be allowed for larger values of , but the ratio b / a could not reach unity. We consider the choice GeV as an upper limit for a since, for higher values, the spectrum is sufficiently different from our original benchmark B that it no longer satisfies the constraint on the relic density. In this case, the upper limit on b is 210 (220) GeV for (), so we must require . In the third panel of Fig. 11 we consider the effects of the off-diagonal components in . Here, we have set with (, ), and have plotted the branching ratio as a function of . As one can see, the constraint on d is much weaker than the analogous constraint on b.

Fig. 11

Top vs. for , GeV and GeV. In the first panel, (), while in the second (, ). Bottom vs. , where only off-diagonal elements of were set using (that is, , )

We conclude that the MaxSFV scenario is possible in the (1, 2) sector if  GeV, and if  GeV as summarised in Table 8.

Table 8

Summary of constraints on and in the MaxSFV scenario. All quantities are in GeV.

Sector	(12)	(13)	(23)
m5¯2 – present	170	8000	–
m5¯2 – future	–	230	3400
m102 – present	520	1800	–
m102 – future	–	1550	73,000

The (1, 3) sector

We see from (31) that, once the Yukawa couplings are complex, the soft-squared masses and trilinear terms also become complex. We remind the reader that the only source of CP violation stems from the CKM phase, which through (15) translates into the complex Yukawa couplings, (14). Then, once an imaginary seed for is set, a real non-zero entry at for will increase faster for both the imaginary and real parts of , than in the case of the pure no-scale set up.

We see from Table 6 that in A1 the value of the electron EDM, , is already close to the experimental limit and from the diagram in Fig. 9 we see the potential importance for this observable when increasing the real part of . In A1, the leading contribution to comes from the terms in (24) and once is non-zero at , then at the GUT scale it will be bigger than in the no-scale case and particularly will have a significant increase. As a consequence, for at the input scale, the most constraining observable is the electron EDM. Figure 12 shows as a function of . The bounds on the electron EDM are shown by the two horizontal solid lines straddling . As one can see, the flavour off-diagonal entry in the squark mass matrix is bounded by GeV for our maximal value of a. Once again, allowing (with ) does not greatly affect this limit. On the other hand, when we consider the EDM as a function of (with ), we find that GeV for the maximal value of .

Fig. 12

Top we show vs. for , GeV and GeV; in the first panel (), while in the second panel (, ). Bottom here we show vs. for (, )

The neutron EDM is well below the present experimental limit, but at close to the future sensitivity of  e cm [73]. In Fig. 13 we show the neutron EDM as a function of for three values of , GeV and GeV. The left panels shows the current (lack of) constraints, while the right panels show the anticipated future constraints. In the top row, (). In the middle row, (, ), and in the bottom row, we plot versus with and . As one can see, there are no current constraints on either b or d for our allowed range in a and c. However, we expect that future constraints can place a limit of about GeV and GeV.

Fig. 13

Top vs. for , GeV and GeV. Here (). For definiteness, we have used the value of [84], for the future sensitivity. Other values (all of ) can be found in [73]. Middle (, ). Bottom vs. for (, )

Other parameters that are affected by switching on a non-zero off-diagonal parameter are , and , which remain (for the most part) within the experimental limits. Figure 14 shows the case for . This branching ratio is particularly sensitive to the increase in if this is allowed to grow much faster than and , which is depicted in the third panel in Fig. 14. When the real part of is non-zero at , while the real parts of and are zero, the values of and will evolve to values close to their no-scale values at , producing a value for close to the no-scale case. When is allowed to increase to  GeV, the contribution to , will dominate over , and the terms in , (28), for , which corresponds to the lightest slepton, will drive to levels above the experimental bound.

Fig. 14

Top vs. for , GeV and GeV. In the first panel (), while in the second panel (, ). Bottom vs. for (, )

In the case of , the Standard Model uncertainty, which must be added to the supersymmetric value, must be taken into account. In Fig. 15 we show as a function of together with the area allowed by the NNLO SM error [80] and the 2 experimental region. This clarifies that the value that we obtain for is in agreement with observations.

Fig. 15

The 2 experimental region of is (2.213 –, and the range of the supersymmetric prediction together with the 2 Standard Model error is (1.25 –

The (2, 3) sector

In this sector the most constraining parameter is the neutron EDM. Just as in the case of sector (1, 3), the neutron EDM is well below the present experimental limit and up to a value of GeV (for ) also below the expected limit of the future sensitivity of  e cm. In Fig. 16 we show the neutron EDM as a function of for three values of , GeV and GeV. As in Fig. 13, we show current constraints from the neutron EDM in the left panels and future limits on right. In the top row for the present experimental limit, while in the second for the future sensitivity. In the top row, (). In the middle row, (, ), and in the bottom row, we plot versus with and . As one can see, there are no current constraints on either b or d for our allowed range in a and c. However, we expect that future constraints can place a limit of about GeV and GeV.

Fig. 16

Top vs. for , GeV and GeV. Here (). For definiteness, we have used the value of [84], for the future sensitivity. Other values (all of ) can be found in [73]. Middle the same as above, except for (, ). Bottom the case for vs. for (, )

Other parameters that are affected by allowing for a non-zero off-diagonal parameter in the (23) sector are , , and , which, however, remain within the experimental limits. Once again, for we also rely on taking into account the Standard Model uncertainty to obtain compatibility. We note also that is sensitive to changes in this sector, though this is noticeable only for light (1 TeV) supersymmetric spectra [51].

Table 8 summarise the constraints on the MaxSFV scenario in the (12), (13) and (23) sectors. The numbers in the various entries of the table are the maximum values in GeV of b (in the soft supersymmetry-breaking fiveplet mass-sequared matrix) where is allowed by present (and possible future) data, and the maximum values of b (in the soft supersymmetry-breaking tenplet mass-sequared matrix) where is allowed by present (and possible future) data. We see that the MaxSFV scenario in the fiveplet (12) sector is consistent with the present data for  GeV, increasing to 520 GeV in the tenplet (12) sector, 8000 GeV in the fiveplet (13) sector, and 1800 GeV in the tenplet (13) sector. There are currently no constraints on MaxSFV in the (23) sector, though this may change with future data.

Summary

We have explored in this paper the phenomenological constraints on super-GUT models, in which soft supersymmetry-breaking inputs are postulated at some scale intermediate between and the Planck scale, that are imposed by upper limits on flavour and CP violation. For this purpose, we have chosen a benchmark supersymmetric model (B in (19) above) motivated by no-scale supergravity that is consistent with other constraints from the LHC (e.g., and the non-appearance of sparticles during Run 1) and cosmology (e.g., the density of cold dark matter and inflation). Within this framework we have considered four possible scenarios for Yukawa couplings that are compatible with CKM mixing and its extension to sparticles. Consideration of the runnings of model parameters in two of these scenarios (A3 and A4 in Eqs. (17) and (18) above) were found to be generally incompatible with the flavour-violation constraints, and not pursued further. However, the other two scenarios (A1 and A2 in Eqs. (15) and (16) above) were found to be compatible with the flavour-violation constraints. They have quite different predictions, and they serve to illustrate the range of possibilities for future flavour-violation measurements in no-scale super-GUTs.

We then considered possible deformations of the no-scale scenario, in which the soft supersymmetry-breaking scalar masses are allowed to be non-zero but much smaller than the gaugino mass at . In particular, we have investigated the maximal magnitudes of off-diagonal terms in the sfermion mass-squared matrices for the SU(5) fiveplets and tenplets, and the possibility that these might be as large as the diagonal entries, a scenario we call MaxSFV. We find that the off-diagonal (12) entry in the fiveplet mass-squared matrix could be as large as the diagonal entries if the latter are 170 GeV and 520 GeV in the and mass-squared matrices, respectively. The corresponding numbers in the (13) sector are  GeV in the fiveplet mass-squared matrix and  GeV for the tenplets. There are currently no useful bounds in the (23) sector. The future sensitivity in would be sensitive to MaxSFV in the (13) sector of  GeV for the for the fiveplets and of  GeV for the tenplets, and of  GeV in the (23) sector for the fiveplets and  GeV for the tenplets.

Within these limits, there would be no supersymmetric flavour problem associated with sfermion masses in the class of near-no-scale super-GUTs discussed in this paper.