Literature DB >> 28302396

Supercritical antisolvent co-precipitation of rifampicin and ethyl cellulose.

Rania Djerafi1, Andri Swanepoel2, Christelle Crampon3, Lonji Kalombo2, Philip Labuschagne2, Elisabeth Badens3, Yasmine Masmoudi3.   

Abstract

Rifampicin-loaded submicron-sized particles were prepared through supercritical anti-solvent process using ethyl cellulose as polymeric encapsulating excipient. Ethyl acetate and a mixture of ethyl acetate/dimethyl sulfoxide (70/30 and 85/15) were used as solvents for both drug and polymeric excipient. When ethyl acetate was used, rifampicin was crystallized separately without being embedded within the ethyl cellulose matrix while by using the ethyl acetate/dimethyl sulfoxide mixture, reduced crystallinity of the active ingredient was observed and a simultaneous precipitation of ethyl cellulose and drug was achieved. The effect of solvent/CO2 molar ratio and polymer/drug mass ratio on the co-precipitates morphology and drug loading was investigated. Using the solvent mixture, co-precipitates with particle sizes ranging between 190 and 230nm were obtained with drug loading and drug precipitation yield from respectively 8.5 to 38.5 and 42.4 to 77.2% when decreasing the ethyl cellulose/rifampicin ratio. Results show that the solvent nature and the initial drug concentrations affect morphology and drug precipitation yield of the formulations. In vitro dissolution studies revealed that the release profile of rifampicin was sustained when co-precipitation was carried out with the solvent mixture. It was demonstrated that the drug to polymer ratio influenced amorphous content of the SAS co-precipitates. Differential scanning calorimetry thermograms and infrared spectra revealed that there is neither interaction between rifampicin and the polymer nor degradation of rifampicin during co-precipitation. In addition, stability stress tests on SAS co-precipitates were carried out at 75% relative humidity and room temperature in order to evaluate their physical stability. SAS co-precipitates were X-ray amorphous and remained stable after 6months of storage. The SAS co-precipitation process using a mixture of ethyl acetate/dimethyl sulfoxide demonstrates that this strategy can be successful for controlling rifampicin delivery.
Copyright © 2017 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Coprecipitation; Ethyl cellulose (PubChem CID: 24832091); Micronization; Rifampicin (PubChem CID: 5381226); Supercritical antisolvent process

Mesh:

Substances:

Year:  2017        PMID: 28302396     DOI: 10.1016/j.ejps.2017.03.016

Source DB:  PubMed          Journal:  Eur J Pharm Sci        ISSN: 0928-0987            Impact factor:   4.384


  3 in total

1.  Solid Dispersion Pellets: An Efficient Pharmaceutical Approach to Enrich the Solubility and Dissolution Rate of Deferasirox.

Authors:  Ali Farmoudeh; Anahita Rezaeiroshan; Mohammadreza Abbaspour; Ali Nokhodchi; Pedram Ebrahimnejad
Journal:  Biomed Res Int       Date:  2020-06-23       Impact factor: 3.411

2.  Liquid antisolvent precipitation: an effective method for ocular targeting of lutein esters.

Authors:  Mingfang Wu; Ziqi Feng; Yiping Deng; Chen Zhong; Yanjie Liu; Jiaying Liu; Xiuhua Zhao; Yujie Fu
Journal:  Int J Nanomedicine       Date:  2019-04-15

Review 3.  Ethylcellulose-A Pharmaceutical Excipient with Multidirectional Application in Drug Dosage Forms Development.

Authors:  Katarzyna Wasilewska; Katarzyna Winnicka
Journal:  Materials (Basel)       Date:  2019-10-17       Impact factor: 3.623

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.