| Literature DB >> 28242947 |
Paola Zunin1, Federica Turrini1, Riccardo Leardi1, Raffaella Boggia1.
Abstract
In this study vacuum impregnation (VI) was employed for the iron enrichment of olive fruits, which are very interesting as food vehicle for VI mineral supplementation for the porosity of their pulp. NaFeEDTA was chosen for olives fortification since it prevents iron from binding with compounds that could hinder it from being efficiently absorbed and since it causes few organoleptic problems. In order to improve the efficiency of the VI process, several parameters of the whole process were studied by design of experiment techniques. First of all D-optimal design was employed for a preliminary screening of the most significant process variables and showed that the concentration of VI solution was by far the most significant process variable, though its time in contact with olives was also significant. A factorial design was then applied to the remaining variables and it showed that the speed of the addition of VI solution was also significant. Finally, the application of a face centered composite design to the three selected variables allowed to detect processing conditions leading to final iron contents of 1.5-3 mg/g, corresponding to an introduction of 10-15 mg Fe with four or five fortified olive fruits. No effect on olive taste was observed at these concentrations. The results showed that olive fruits were the most interesting vehicles for the supplementation of both iron and other minerals.Entities:
Keywords: Design of experiment; Enrichment; Iron; Olive fruits; Vacuum impregnation
Year: 2017 PMID: 28242947 PMCID: PMC5306042 DOI: 10.1007/s13197-017-2489-8
Source DB: PubMed Journal: J Food Sci Technol ISSN: 0022-1155 Impact factor: 2.701