Literature DB >> 28222886

Effect of different acidic solutions on the optical behavior of lithium disilicate ceramics.

Daniela Micheline Dos Santos1, Emily Vivianne Freitas da Silva2, Denis Watanabe3, Sandro Basso Bitencourt2, Aimée Maria Guiotti4, Marcelo Coelho Goiato4.   

Abstract

STATEMENT OF PROBLEM: The stability of the optical characteristics of dental ceramics is essential. Degradation of these materials resulting from pH or temperature alterations in the oral cavity can lead to treatment failure.
PURPOSE: The purpose of this in vitro study was to evaluate the color change (ΔE), the L* coordinate, the translucency parameter, and the contrast ratio of lithium disilicate ceramic exposed to commonly used and potentially colorant solutions.
MATERIAL AND METHODS: Fifty lithium disilicate specimens were prepared and divided into 5 groups according to the immersion solution (artificial saliva, orange juice, cola, coffee, and red wine). Immersions in acidic beverages were alternated in a thermocycler with artificial saliva. The control group was immersed in artificial saliva at 37°C throughout the immersion period. After 168 hours of immersion, the color parameters were assessed with a spectrophotometer and calculated using the because system on 2 backgrounds (black and white) and in 2 time periods, before thermocycling and after thermocycling. Data were submitted to analysis of variance followed by the Tukey honest significant difference test (α=.05).
RESULTS: Greater color change (ΔE) and lower L* coordinate values were observed after immersion in orange juice and cola. Regarding the translucency parameter and contrast ratio, the immersion in coffee resulted in greater opacity and lower translucency of the material.
CONCLUSIONS: Alterations in the color stainability, the L* coordinate values, the translucency parameter, and the contrast ratio of the lithium disilicate ceramic were observed, according to the acidic solutions tested.
Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2017        PMID: 28222886     DOI: 10.1016/j.prosdent.2016.10.023

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  4 in total

1.  Effect of surface finishing treatments on the color stability of CAD/CAM materials.

Authors:  Funda Ozen; Nermin Demirkol; Ozge Parlar Oz
Journal:  J Adv Prosthodont       Date:  2020-06-18       Impact factor: 1.904

2.  Evaluating the Color Stability of Ocular Prosthesis after Immersion in Three Different Immersion Media: An In Vitro Study.

Authors:  Seema Sathe Kambala; Deepika Rathi; Anjali Borle; K Rajanikanth; Tanvi Jaiswal; Mithilesh Dhamande
Journal:  J Int Soc Prev Community Dent       Date:  2020-04-14

3.  Effects of Khat on Surface Roughness and Color of Feldspathic and Zirconia Porcelain Materials under Simulated Oral Cavity Conditions.

Authors:  Mohammed M Al Moaleem; Rashad AlSanosy; Nasser M Al Ahmari; Mansoor Shariff; Abdulkhaliq A Alshadidi; Hassan A Alhazmi; Asaad Khalid
Journal:  Medicina (Kaunas)       Date:  2020-05-13       Impact factor: 2.430

4.  In Vitro Effect of Acidic Solutions and Sodium Fluoride on Surface Roughness of Two Types of CAD-CAM Dental Ceramics.

Authors:  Elham Farhadi; Hamid Kermanshah; Shiva Rafizadeh; Reza Saeedi; Ladan Ranjbar Omrani
Journal:  Int J Dent       Date:  2021-07-23
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.