Literature DB >> 28160707

Optimization of cellulose and sugarcane bagasse oxidation: Application for adsorptive removal of crystal violet and auramine-O from aqueous solution.

Luide Rodrigo Martins1, Josilene Aparecida Vieira Rodrigues1, Oscar Fernando Herrera Adarme1, Tânia Márcia Sacramento Melo1, Leandro Vinícius Alves Gurgel1, Laurent Frédéric Gil2.   

Abstract

Cellulose (Cel) and sugarcane bagasse (SB) were oxidized with an H3PO4-NaNO2 mixture to obtain adsorbent materials with high contents of carboxylic groups. The oxidation reactions of Cel and SB were optimized using design of experiments (DOE) and response surface methodology (RSM). The optimized synthesis conditions yielded Cox and SBox with 4.8mmol/g and 4.5mmol/g of carboxylic acid groups, respectively. Cox and SBox were characterized by FTIR, TGA, PZC and solid-state 13C NMR. The adsorption of the model cationic dyes crystal violet (CV) and auramine-O (AO) on Cox and SBox in aqueous solution was investigated as a function of the solution pH, the contact time and the initial dye concentration. The adsorption of CV and AO on Cox was described by the Elovich equation and the pseudo-first-order kinetic model respectively, while the adsorption of CV and AO on SBox was described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by the Langmuir and Konda models, with maximum adsorption capacities (Qmax) of 1117.8mg/g of CV and 1223.3mg/g of AO on Cox and 1018.2mg/g of CV and 682.8mg/g of AO on SBox. Desorption efficiencies were in the range of 50-52% and re-adsorption capacities varied from 65 to 81%, showing the possibility of reuse of both adsorbent materials.
Copyright © 2017 Elsevier Inc. All rights reserved.

Entities:  

Keywords:  Adsorption; Auramine-O; Crystal violet; Desorption; Oxidized cellulose; Oxidized sugarcane bagasse

Mesh:

Substances:

Year:  2017        PMID: 28160707     DOI: 10.1016/j.jcis.2017.01.085

Source DB:  PubMed          Journal:  J Colloid Interface Sci        ISSN: 0021-9797            Impact factor:   8.128


  5 in total

1.  Preparation of a poly(acrylic acid) based hydrogel with fast adsorption rate and high adsorption capacity for the removal of cationic dyes.

Authors:  Zhenyu Yuan; Jie Wang; Yiming Wang; Qian Liu; Yujie Zhong; Yu Wang; Li Li; Stephen F Lincoln; Xuhong Guo
Journal:  RSC Adv       Date:  2019-07-05       Impact factor: 4.036

2.  Potential of Cellulose Functionalized with Carboxylic Acid as Biosorbent for the Removal of Cationic Dyes in Aqueous Solution.

Authors:  Lucinaldo Santos Silva; Jhonatam Carvalho; Roosevelt Delano Sousa Bezerra; Mateus Soares Silva; Francisco José Lustosa Ferreira; Josy Anteveli Osajima; Edson Cavalcanti da Silva Filho
Journal:  Molecules       Date:  2018-03-23       Impact factor: 4.411

3.  Zero Valent Iron Nanoparticle-Loaded Nanobentonite Intercalated Carboxymethyl Chitosan for Efficient Removal of Both Anionic and Cationic Dyes.

Authors:  Abdelazeem S Eltaweil; Ashraf M El-Tawil; Eman M Abd El-Monaem; Gehan M El-Subruiti
Journal:  ACS Omega       Date:  2021-03-01

4.  Removal of Anionic and Cationic Dyes Present in Solution Using Biomass of Eichhornia crassipes as Bioadsorbent.

Authors:  Eunice López-Ahumada; Mercedes Salazar-Hernández; Alfonso Talavera-López; O J Solis-Marcial; Rosa Hernández-Soto; Jose P Ruelas-Leyva; José Alfredo Hernández
Journal:  Molecules       Date:  2022-09-29       Impact factor: 4.927

5.  Application of Taguchi method and response surface methodology into the removal of malachite green and auramine-O by NaX nanozeolites.

Authors:  Siroos Shojaei; Saeed Shojaei; Shahab S Band; Amir Abbas Kazemzadeh Farizhandi; Milad Ghoroqi; Amir Mosavi
Journal:  Sci Rep       Date:  2021-08-06       Impact factor: 4.379

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.