| Literature DB >> 28139778 |
Grant Kirker1, Sam Zelinka2, Sophie-Charlotte Gleber3, David Vine3, Lydia Finney3, Si Chen3, Young Pyo Hong4, Omar Uyarte5,6, Stefan Vogt3, Jody Jellison7, Barry Goodell8, Joseph E Jakes9.
Abstract
The role of ions in the fungal decay process of lignoEntities:
Mesh:
Substances:
Year: 2017 PMID: 28139778 PMCID: PMC5282557 DOI: 10.1038/srep41798
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Large field-of-view XFM ion maps of ion distribution in undecayed wood blocks (a–f) and wood blocks exposed to the model brown rot fungus Serpula lacrymans for 14 days in a soil block test (g–l). Two blocks were imaged for each treatment. The longitudinal wood axis was oriented vertically and the bottoms of the exposed blocks were in contact with the feeder strip during the soil block test. For a given ion, the intensities were scaled the same between blocks. Between ions, intensities were scaled to optimize visualization of ion spatial distribution.
Figure 2Large field-of-view XFM ion maps of Fe distribution in two sterilized control wood blocks placed directly on top of the soil for 8 weeks in a soil block test bottle.
During the 8 weeks the blocks inadvertently rolled around on top of the soil and the areas of high Fe intensity are likely small pieces of soil. However, no general diffusion of Fe into the wood is observed like that observed in wood blocks exposed to Serpula lacrymans in Fig. 1k.
Figure 3Submicron resolution XFM ion maps of 2-μm-thick transverse sections cut from undecayed wood Block 1 and exposed Block 3 in Fig. 1.
For a given element, the intensities were scaled the same between sections. Between elements, intensities were scaled to optimize ion distribution visualization.
Calculated average ion concentrations of the undecayed and decayed wood cell walls shown in Fig. 3.
| Element | Undecayed | Decayed (Fe-gradient) | Decayed (Fe-rich) |
|---|---|---|---|
| (μmoles/g cell wall) | (μmoles/g cell wall) | (μmoles/g cell wall) | |
| K | 25 ± 12 | 19 ± 11 | 20 ± 11 |
| Ca | 21 ± 17 | 4 ± 6 | 10 ± 9 |
| Mn | 4 ± 3 | 3 ± 2 | 6 ± 4 |
| Fe | 0.7 ± 0.9 | 3 ± 2 | 7 ± 4 |
| Zn | 1.4 ± 0.5 | 1.5 ± 0.6 | 1.5 ± 0.6 |
The intensities in Fig. 3 were converted to μmoles/g cell wall by dividing by the 2 μm cell wall thickness and then dividing by an assumed 1.5 g/cm3 cell wall density. Masks were created to exclude the cell wall lumina and K and Ca hotspots in the decayed wood that were assumed to be fungal hyphae fragments with associated ECM. The average concentrations of the pixels in the remaining areas were calculated to quantify the cell wall ion concentrations. The reported uncertainty is the standard deviation.
Figure 4Submicron resolution XFM ion maps of a 2-μm-thick tangential-longitudinal section exposed in a control soil block chamber (a–f), and a Serpula lacrymans inoculated feeder strip in a soil block test for 10 days (g–l). For a given element, the intensities were scaled the same between sections. Between elements, intensities were scaled to optimize visualization of ion distribution. The threadlike features in the exposed total scattering map (g) were hyphae. The amorphous bodies (most obvious in 3i) which show colocation of Ca with other ions around the fungal hyphae were putative ECM which has dried around the fungal hyphae and concentrated ions that originally would have been distributed throughout the hydrated ECM matrix connecting the fungal hyphae to the wood cell wall. The boxes in the exposed total scattering map (g) highlight regions for ion colocation maps in Fig. 6.
Figure 5Optical microscopy (a) and submicron resolution XFM ion maps of three oxalate crystals within a 2-μm-thick tangential-longitudinal section that was exposed to a Serpula lacrymans inoculated feeder strip in a soil block test for 20 days. Between elements, intensities were scaled to optimize visualization of ion distribution.
Figure 62D ion colocation maps of Ca K Fe (a) and Zn K Fe (b) of a putative hyphal anastomosis in the area of the right-hand box drawn in Fig. 4g. Ca Mn Fe (c) colocation map of putative dried ECM from the left-hand box. Color intensities were scaled to optimize spatial visualization of ion distribution.
Figure 7Micron-scale resolution XFM ion volume reconstructions of a wood sliver and attached fungal fragments and ECM residue cut from the Fe-rich region near the bottom of exposed Block 3 (Fig. 1).
During tomographic reconstruction, the quantification of the ions was lost, however relative ion concentration differences can be detected and compared. The ratios indicated are molar ratios with respect to the amount of Zn. The boxes have a square base of 90 μm per side and a 75 μm height. See Supplementary Movie 1 for 360 degree rotations of volumes.
Figure 8Ca Mn Fe 2D ion colocation map from an ion concentration of putative dried ECM attached near the bottom of the wood sliver (Fig. 7).
Color intensities were scaled to optimize spatial visualization of ion distribution within the structure containing the hotspot, and not the ions inside the wood cell wall.
Figure 9Ca K Fe (a,d), Ca Mn Fe (b,e), Ca Zn Fe (c,f) ion colocation volume reconstructions (a–c) and orthogonal cuts (d–f) from the volume of ion concentration within ECM residual material located near the bottom of the wood sliver (Fig. 7). The boxes have a rectangular base of 21 μm by 24.3 μm and a 30 μm height. The ratios indicated in the figure are molar ratios with respect to the amount of Zn. See Supplementary Movie 2 for 360-degree rotations of volumes and orthogonal views.