Literature DB >> 28101440

High Spatial Resolution Laser Desorption/Ionization Mass Spectrometry Imaging of Organic Layers in an Organic Light-Emitting Diode.

Yuko Tachibana1, Yoji Nakajima1, Tsuguhide Isemura1, Kiyoshi Yamamoto1, Takaya Satoh2, Jun Aoki3, Michisato Toyoda3.   

Abstract

To improve the durability of organic materials in electronic devices, an analytical method that can obtain information about the molecular structure directly from specific areas on a device is desired. For this purpose, laser desorption/ionization mass spectrometry imaging (LDI-MSI) is one of the most promising methods. The high spatial resolution stigmatic LDI-MSI with MULTUM-IMG2 in the direct analysis of organic light-emitting diodes was shown to obtain a detailed mass image of organic material in the degraded area after air exposure. The mass image was observed to have a noticeably improved spatial resolution over typical X-ray photoelectron spectroscopy, generally used technique in analysis of electronic devices. A prospective m/z was successfully deduced from the high spatial resolution MSI data. Additionally, mass resolution and accuracy using a spiral-orbit TOF mass spectrometer, SpiralTOF, were also investigated. The monoisotopic mass for the main component, N,N'-di-1-naphthalenyl-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine (m/z 588), was measured with a mass resolution of approximately 80,000 and a mass error of about 5 mDa using an external calibrant. This high mass resolution and accuracy data successfully deduced a possible elemental composition of partially remained material in the degraded area, C36H24, which was determined as anthracene, 9-[1,1'-biphenyl]-4-yl-10-(2-naphthalenyl) by combining structural information with high-energy CID data. The high spatial resolution of 1 μm in LDI-MSI along with high mass resolution and accuracy could be useful in obtaining molecular structure information directly from specific areas on a device, and is expected to contribute to the evolution of electrical device durability.

Entities:  

Keywords:  MULTUM; OLED; SpiralTOF; laser desorption/ionization mass spectrometry imaging; mass accuracy

Year:  2017        PMID: 28101440      PMCID: PMC5225949          DOI: 10.5702/massspectrometry.A0052

Source DB:  PubMed          Journal:  Mass Spectrom (Tokyo)        ISSN: 2186-5116


  6 in total

1.  Multi-turn time-of-flight mass spectrometers with electrostatic sectors.

Authors:  Michisato Toyoda; Daisuke Okumura; Morio Ishihara; Itsuo Katakuse
Journal:  J Mass Spectrom       Date:  2003-11       Impact factor: 1.982

2.  Scanning microprobe matrix-assisted laser desorption ionization (SMALDI) mass spectrometry: instrumentation for sub-micrometer resolved LDI and MALDI surface analysis.

Authors:  Bernhard Spengler; Martin Hubert
Journal:  J Am Soc Mass Spectrom       Date:  2002-06       Impact factor: 3.109

3.  High-spatial resolution mass spectrometric imaging of peptide and protein distributions on a surface.

Authors:  Stefan L Luxembourg; Todd H Mize; Liam A McDonnell; Ron M A Heeren
Journal:  Anal Chem       Date:  2004-09-15       Impact factor: 6.986

4.  Development of a high-performance MALDI-TOF mass spectrometer utilizing a spiral ion trajectory.

Authors:  Takaya Satoh; Takafumi Sato; Jun Tamura
Journal:  J Am Soc Mass Spectrom       Date:  2007-04-24       Impact factor: 3.109

5.  Tandem time-of-flight mass spectrometer with high precursor ion selectivity employing spiral ion trajectory and improved offset parabolic reflectron.

Authors:  Takaya Satoh; Takafumi Sato; Ayumi Kubo; Jun Tamura
Journal:  J Am Soc Mass Spectrom       Date:  2011-03-24       Impact factor: 3.109

6.  Development of a stigmatic mass microscope using laser desorption∕ionization and a multi-turn time-of-flight mass spectrometer.

Authors:  Hisanao Hazama; Hidetoshi Yoshimura; Jun Aoki; Hirofumi Nagao; Michisato Toyoda; Katsuyoshi Masuda; Kenichi Fujii; Toshio Tashima; Yasuhide Naito; Kunio Awazu
Journal:  J Biomed Opt       Date:  2011-04       Impact factor: 3.170

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.