Literature DB >> 28069511

In vivo characterization of magnesium alloy biodegradation using electrochemical H2 monitoring, ICP-MS, and XPS.

Daoli Zhao1, Tingting Wang1, Keaton Nahan1, Xuefei Guo2, Zhanping Zhang3, Zhongyun Dong4, Shuna Chen4, Da-Tren Chou5, Daeho Hong5, Prashant N Kumta6, William R Heineman7.   

Abstract

The effect of widely different corrosion rates of Mg alloys on four parameters of interest for in vivo characterization was evaluated: (1) the effectiveness of transdermal H2 measurements with an electrochemical sensor for noninvasively monitoring biodegradation compared to the standard techniques of in vivo X-ray imaging and weight loss measurement of explanted samples, (2) the chemical compositions of the corrosion layers of the explanted samples by XPS, (3) the effect on animal organs by histology, and (4) the accumulation of corrosion by-products in multiple organs by ICP-MS. The in vivo biodegradation of three magnesium alloys chosen for their widely varying corrosion rates - ZJ41 (fast), WKX41 (intermediate) and AZ31 (slow) - were evaluated in a subcutaneous implant mouse model. Measuring H2 with an electrochemical H2 sensor is a simple and effective method to monitor the biodegradation process in vivo by sensing H2 transdermally above magnesium alloys implanted subcutaneously in mice. The correlation of H2 levels and biodegradation rate measured by weight loss shows that this non-invasive method is fast, reliable and accurate. Analysis of the insoluble biodegradation products on the explanted alloys by XPS showed all of them to consist primarily of Mg(OH)2, MgO, MgCO3 and Mg3(PO4)2 with ZJ41 also having ZnO. The accumulation of magnesium and zinc were measured in 9 different organs by ICP-MS. Histological and ICP-MS studies reveal that there is no significant accumulation of magnesium in these organs for all three alloys; however, zinc accumulation in intestine, kidney and lung for the faster biodegrading alloy ZJ41 was observed. Although zinc accumulates in these three organs, no toxicity response was observed in the histological study. ICP-MS also shows higher levels of magnesium and zinc in the skull than in the other organs. STATEMENT OF SIGNIFICANCE: Biodegradable devices based on magnesium and its alloys are promising because they gradually dissolve and thereby avoid the need for subsequent removal by surgery if complications arise. In vivo biodegradation rate is one of the crucial parameters for the development of these alloys. Promising alloys are first evaluated in vivo by being implanted subcutaneously in mice for 1month. Here, we evaluated several magnesium alloys with widely varying corrosion rates in vivo using multiple characterization techniques. Since the alloys biodegrade by reacting with water forming H2 gas, we used a recently demonstrated, simple, fast and noninvasive method to monitor the biodegradation process by just pressing the tip of a H2 sensor against the skin above the implant. The analysis of 9 organs (intestine, kidney, spleen, lung, heart, liver, skin, brain and skull) for accumulation of Mg and Zn revealed no significant accumulation of magnesium in these organs. Zinc accumulation in intestine, kidney and lung was observed for the faster corroding implant ZJ41. The surfaces of explanted alloys were analyzed to determine the composition of the insoluble biodegradation products. The results suggest that these tested alloys are potential candidates for biodegradable implant applications.
Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Biodegradable implants; Hydrogen; Hydrogen sensor; Magnesium; Magnesium alloys; Metallic trace; Zinc

Mesh:

Substances:

Year:  2017        PMID: 28069511     DOI: 10.1016/j.actbio.2017.01.024

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  7 in total

1.  In Vitro Monitoring of Magnesium-Based Implants Degradation by Surface Analysis and Optical Spectroscopy.

Authors:  Hafiz Wajahat Hassan; Maryam Rahmati; Alejandro Barrantes; Håvard Jostein Haugen; Peyman Mirtaheri
Journal:  Int J Mol Sci       Date:  2022-05-29       Impact factor: 6.208

Review 2.  Updates on the research and development of absorbable metals for biomedical applications.

Authors:  Hendra Hermawan
Journal:  Prog Biomater       Date:  2018-05-22

3.  Transgenic zebrafish model for quantification and visualization of tissue toxicity caused by alloying elements in newly developed biodegradable metal.

Authors:  Hyung-Seop Han; Gun Hyuk Jang; Indong Jun; Hyunseon Seo; Jimin Park; Sion Glyn-Jones; Hyun-Kwang Seok; Kwan Hyi Lee; Diego Mantovani; Yu-Chan Kim; James R Edwards
Journal:  Sci Rep       Date:  2018-09-14       Impact factor: 4.379

4.  Zn-contained mussel-inspired film on Mg alloy for inhibiting bacterial infection and promoting bone regeneration.

Authors:  Feng Peng; Shi Cheng; Ruiying Zhang; Mei Li; Jielong Zhou; Donghui Wang; Yu Zhang
Journal:  Regen Biomater       Date:  2020-09-30

5.  Novel Mg-0.5Ca-xMn Biodegradable Alloys Intended for Orthopedic Application: An In Vitro and In Vivo Study.

Authors:  Corneliu Munteanu; Daniela Maria Vlad; Eusebiu-Viorel Sindilar; Bogdan Istrate; Maria Butnaru; Sorin Aurelian Pasca; Roxana Oana Nastasa; Iuliana Mihai; Stefan-Lucian Burlea
Journal:  Materials (Basel)       Date:  2021-11-27       Impact factor: 3.623

Review 6.  In silico modelling of the corrosion of biodegradable magnesium-based biomaterials: modelling approaches, validation and future perspectives.

Authors:  Aditya Joshi; George Dias; Mark P Staiger
Journal:  Biomater Transl       Date:  2021-09-28

Review 7.  Magnesium for Implants: A Review on the Effect of Alloying Elements on Biocompatibility and Properties.

Authors:  S Fida Hassan; M T Islam; N Saheb; M M A Baig
Journal:  Materials (Basel)       Date:  2022-08-18       Impact factor: 3.748

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.