Symmetry-breaking nanostructures on crystalline silicon for enhanced light trapping in thin film solar cells.

We introduce a new approach to systematically break the symmetry in periodic nanostructures on a crystalline silicon surface. Our focus is inverted nanopyramid arrays with a prescribed symmetry. The arrangement and symmetry of nanopyramids are determined by etch mask design and its rotation with respect to the [110] orientation of the Si(001) substrate. This approach eliminates the need for using expensive off-cut silicon wafers. We also make use of low-cost, manufacturable, wet etching steps to fabricate the nanopyramids. Our experiment and computational modeling demonstrate that the symmetry breaking can increase the photovoltaic efficiency in thin-film silicon solar cells. For a 10-micron-thick active layer, the efficiency improves from 27.0 to 27.9% by enhanced light trapping over the broad sunlight spectrum. Our computation further reveals that this improvement would increase from 28.1 to 30.0% in the case of a 20-micron-thick active layer, when the unetched area between nanopyramids is minimized with over-etching. In addition to the immediate benefit to solar photovoltaics, our method of symmetry breaking provides a useful experimental platform to broadly study the effect of symmetry breaking on spectrally tuned light absorption and emission.