Literature DB >> 28027527

Predicting the impact of feed spacer modification on biofouling by hydraulic characterization and biofouling studies in membrane fouling simulators.

A Siddiqui1, S Lehmann2, Sz S Bucs3, M Fresquet4, L Fel5, E I E C Prest6, J Ogier7, C Schellenberg8, M C M van Loosdrecht9, J C Kruithof10, J S Vrouwenvelder11.   

Abstract

Feed spacers are an essential part of spiral-wound reverse osmosis (RO) and nanofiltration (NF) membrane modules. Geometric modification of feed spacers is a potential option to reduce the impact of biofouling on the performance of membrane systems. The objective of this study was to evaluate the biofouling potential of two commercially available reference feed spacers and four modified feed spacers. The spacers were compared on hydraulic characterization and in biofouling studies with membrane fouling simulators (MFSs). The virgin feed spacer was characterized hydraulically by their resistance, measured in terms of feed channel pressure drop, performed by operating MFSs at varying feed water flow rates. Short-term (9 days) biofouling studies were carried out with nutrient dosage to the MFS feed water to accelerate the biofouling rate. Long-term (96 days) biofouling studies were done without nutrient dosage to the MFS feed water. Feed channel pressure drop was monitored and accumulation of active biomass was quantified by adenosine tri phosphate (ATP) determination. The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies). Significantly different trends in hydraulic resistance and biofouling impact for the six feed spacers were observed. The same ranking for biofouling impact on the feed spacers was found for the (i) short-term biofouling study with nutrient dosage and the (ii) long-term biofouling study without nutrient dosage. The ranking for hydraulic resistance for six virgin feed spacers differed significantly from the ranking of the biofouling impact, indicating that hydraulic resistance of clean feed spacers does not predict the hydraulic resistance of biofouled feed spacers. Better geometric design of feed spacers can be a suitable approach to minimize impact of biofouling in spiral wound membrane systems.
Copyright © 2016 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Biofouling; Feed spacers; Hydraulic characterization; Seawater desalination; Wastewater reuse

Mesh:

Substances:

Year:  2016        PMID: 28027527     DOI: 10.1016/j.watres.2016.12.034

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  4 in total

1.  Mitigating biofouling with a vanillin coating on thin film composite reverse osmosis membranes.

Authors:  Hyunseo Shin; Chansoo Park; Chang-Kyu Lee; Yong-Soo Lee; Jong-Oh Kim
Journal:  Environ Sci Pollut Res Int       Date:  2019-11-21       Impact factor: 4.223

2.  Effect of metabolic uncoupler, 3,3',4',5-tetrachlorosalicylanilide (TCS) on Bacillus subtilis: biofilm formation, flocculability and surface characteristics.

Authors:  Xiao-Chi Feng; Wan-Qian Guo; He-Shan Zheng; Qing-Lian Wu; Hai-Chao Luo; Nan-Qi Ren
Journal:  RSC Adv       Date:  2018-05-01       Impact factor: 4.036

3.  Pilot-Scale Assessment of Urea as a Chemical Cleaning Agent for Biofouling Control in Spiral-Wound Reverse Osmosis Membrane Elements.

Authors:  Huma Sanawar; Szilárd S Bucs; Martin A Pot; Jure Zlopasa; Nadia M Farhat; Geert-Jan Witkamp; Joop C Kruithof; Mark C M van Loosdrecht; Johannes S Vrouwenvelder
Journal:  Membranes (Basel)       Date:  2019-09-06

4.  Permeation Increases Biofilm Development in Nanofiltration Membranes Operated with Varying Feed Water Phosphorous Concentrations.

Authors:  Luisa Javier; Laura Pulido-Beltran; Johannes S Vrouwenvelder; Nadia M Farhat
Journal:  Membranes (Basel)       Date:  2022-03-18
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.