Literature DB >> 27982464

A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks.

Liliang Ouyang1,2, Christopher B Highley1, Wei Sun2, Jason A Burdick1.   

Abstract

An in situ crosslinking strategy is used for 3D bioprinting of nonviscous photo-crosslinkable hydrogels. This method can be generalized to various photo-crosslinkable formulations, maintaining high embedded cell viability and tunable cell behavior. Heterogeneous and hollow filaments can be printed using this strategy, allowing fabrication of complex engineered cell-laden constructs.
© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Keywords:  3D printing; biomaterials; bioprinting; hydrogels; photo-crosslinking

Year:  2016        PMID： 27982464     DOI： 10.1002/adma.201604983

Source DB:  PubMed          Journal:  Adv Mater        ISSN： 0935-9648            Impact factor:   30.849


  56 in total

1.  Efficient myotube formation in 3D bioprinted tissue construct by biochemical and topographical cues.

Authors:  WonJin Kim; Hyeongjin Lee; JiUn Lee; Anthony Atala; James J Yoo; Sang Jin Lee; Geun Hyung Kim
Journal:  Biomaterials       Date:  2019-11-19       Impact factor: 12.479

2.  Three-dimensional extrusion bioprinting of single- and double-network hydrogels containing dynamic covalent crosslinks.

Authors:  Leo L Wang; Christopher B Highley; Yi-Cheun Yeh; Jonathan H Galarraga; Selen Uman; Jason A Burdick
Journal:  J Biomed Mater Res A       Date:  2018-01-23       Impact factor: 4.396

3.  3D printed coaxial nozzles for the extrusion of hydrogel tubes toward modeling vascular endothelium.

Authors:  S Cem Millik; Ashley M Dostie; Dylan G Karis; Patrick T Smith; Michael McKenna; Nathan Chan; Chad D Curtis; Elizabeth Nance; Ashleigh B Theberge; Alshakim Nelson
Journal:  Biofabrication       Date:  2019-07-12       Impact factor: 9.954

4.  Polymeric 3D Printed Structures for Soft-Tissue Engineering.

Authors:  Scott Stratton; Ohan S Manoukian; Ravi Patel; Adam Wentworth; Swetha Rudraiah; Sangamesh G Kumbar
Journal:  J Appl Polym Sci       Date:  2017-09-14       Impact factor: 3.125

5.  Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments.

Authors:  Wanjun Liu; Zhe Zhong; Ning Hu; Yixiao Zhou; Lucia Maggio; Amir K Miri; Alessio Fragasso; Xiangyu Jin; Ali Khademhosseini; Yu Shrike Zhang
Journal:  Biofabrication       Date:  2018-01-12       Impact factor: 9.954

6.  3D-printable self-healing and mechanically reinforced hydrogels with host-guest non-covalent interactions integrated into covalently linked networks.

Authors:  Zhifang Wang; Geng An; Ye Zhu; Xuemin Liu; Yunhua Chen; Hongkai Wu; Yingjun Wang; Xuetao Shi; Chuanbin Mao
Journal:  Mater Horiz       Date:  2019-01-09       Impact factor: 13.266

7.  Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds.

Authors:  Kaivalya A Deo; Kanwar Abhay Singh; Charles W Peak; Daniel L Alge; Akhilesh K Gaharwar
Journal:  Tissue Eng Part A       Date:  2020-03       Impact factor: 3.845

Review 8.  3D bioprinting of vascular conduits for pediatric congenital heart repairs.

Authors:  Wenhan Lee; Yi Hong; Guohao Dai
Journal:  Transl Res       Date:  2019-04-11       Impact factor: 7.012

Review 9.  Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting.

Authors:  Yang Wu; Dino J Ravnic; Ibrahim T Ozbolat
Journal:  Trends Biotechnol       Date:  2020-02-24       Impact factor: 19.536

10.  Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments.

Authors:  Andrea Mazzocchi; Mahesh Devarasetty; Richard Huntwork; Shay Soker; Aleksander Skardal
Journal:  Biofabrication       Date:  2018-10-30       Impact factor: 9.954
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.