Literature DB >> 27932041

Source apportionment and health risk assessment of heavy metals in soil for a township in Jiangsu Province, China.

Yanxue Jiang1, Sihong Chao1, Jianwei Liu1, Yue Yang1, Yanjiao Chen1, Aichen Zhang1, Hongbin Cao2.   

Abstract

Human activities contribute greatly to heavy metal pollution in soils. Concentrations of 15 metal elements were detected in 105 soil samples collected from a typical rural-industrial town in southern Jiangsu, China. Among them, 7 heavy metals-lead, copper, zinc, arsenic, chromium, cadmium, and nickel-were considered in the health risk assessment for residents via soil inhalation, dermal contact, and/or direct/indirect ingestion. Their potential sources were quantitatively apportioned by positive matrix factorization using the data set of all metal elements, in combination with geostatistical analysis, land use investigation, and industrial composition analysis. Furthermore, the health risks imposed by sources of heavy metal in soil were estimated for the first time. The results indicated that Cr, Cu, Cd, Pb, Ni, and Co accumulated in the soil, attaining a mild pollution level. The total hazard index values were 3.62 and 6.11, and the total cancer risks were 9.78 × 10-4 and 4.03 × 10-4 for adults and children, respectively. That is, both non-carcinogenic and carcinogenic risks posed by soil metals were above acceptable levels. Cr and As require special attention because the health risks of Cr and As individually exceeded the acceptable levels. The ingestion of homegrown produce was predominantly responsible for the high risks. The potential sources were apportioned as: a) waste incineration and textile/dyeing industries (28.3%), b) natural sources (45.4%), c) traffic emissions (5.3%), and d) electroplating industries and livestock/poultry breeding (21.0%). Health risks of four sources accounted for 23.5%, 32.7%, 7.4%, and 36.4% of the total risk, respectively.
Copyright © 2016. Published by Elsevier Ltd.

Entities:  

Keywords:  Health risks; Positive matrix factorization; Soil heavy metals; Source apportionment

Mesh:

Substances:

Year:  2016        PMID: 27932041     DOI: 10.1016/j.chemosphere.2016.11.088

Source DB:  PubMed          Journal:  Chemosphere        ISSN: 0045-6535            Impact factor:   7.086


  39 in total

1.  Using magnetic susceptibility to evaluate pollution status of the sediment for a typical reservoir in northwestern China.

Authors:  Huiyun Pan; Xinwei Lu; Kai Lei; Dongqi Shi; Chunhui Ren; Linna Yang; Lijun Wang
Journal:  Environ Sci Pollut Res Int       Date:  2018-11-30       Impact factor: 4.223

2.  Contamination characteristics and potential environmental implications of heavy metals in road dusts in typical industrial and agricultural cities, southeastern Hubei Province, Central China.

Authors:  Da-Mao Xu; Jia-Quan Zhang; Bo Yan; Hao Liu; Li-Li Zhang; Chang-Lin Zhan; Li Zhang; Ping Zhong
Journal:  Environ Sci Pollut Res Int       Date:  2018-10-26       Impact factor: 4.223

3.  Spatial modeling applied to environmental monitoring: identifying sources of potentially toxic metals in aquatic system.

Authors:  Elisabete Leide Marzola; Luana Maria Tavares Rosa; Rogério Hartung Toppa; Marcos Roberto Martines; Leonardo Machado Pitombo; Alexandre Donizeti Martins Cavagis; Janaina Braga do Carmo; Wander Gustavo Botero; Luciana Camargo de Oliveira
Journal:  Environ Geochem Health       Date:  2018-11-20       Impact factor: 4.609

4.  Spatiotemporal variation and exposure risk to human health of potential toxic elements in suburban vegetable soils of a megacity, SW China, 2012-2016.

Authors:  Haijian Bing; Zhongxiang Xiang; He Zhu; Yanhong Wu
Journal:  Environ Sci Pollut Res Int       Date:  2017-11-27       Impact factor: 4.223

5.  Multivariate statistical and lead isotopic analyses approach to identify heavy metal sources in topsoil from the industrial zone of Beijing Capital Iron and Steel Factory.

Authors:  Guangxu Zhu; Qingjun Guo; Huayun Xiao; Tongbin Chen; Jun Yang
Journal:  Environ Sci Pollut Res Int       Date:  2017-05-06       Impact factor: 4.223

6.  Heavy metals and associated health risk of wheat grain in a traditional cultivation area of Baoji, Shaanxi, China.

Authors:  Wenxiao Yang; Dan Wang; Mengke Wang; Fei Zhou; Jie Huang; Mingyue Xue; Quang Toan Dinh; Dongli Liang
Journal:  Environ Monit Assess       Date:  2019-06-11       Impact factor: 2.513

7.  Distribution and health risk assessment to heavy metals near smelting and mining areas of Hezhang, China.

Authors:  Meryem Briki; Yi Zhu; Yang Gao; Mengmeng Shao; Huaijian Ding; Hongbing Ji
Journal:  Environ Monit Assess       Date:  2017-08-19       Impact factor: 2.513

8.  Source apportionment and health risk assessment of potentially toxic elements in road dust from urban industrial areas of Ahvaz megacity, Iran.

Authors:  Ali Najmeddin; Behnam Keshavarzi; Farid Moore; Ahmadreza Lahijanzadeh
Journal:  Environ Geochem Health       Date:  2017-10-28       Impact factor: 4.609

9.  Contaminant characteristics and environmental risk assessment of heavy metals in the paddy soils from lead (Pb)-zinc (Zn) mining areas in Guangdong Province, South China.

Authors:  Da-Mao Xu; Bo Yan; Tao Chen; Chang Lei; Han-Zhi Lin; Xian-Ming Xiao
Journal:  Environ Sci Pollut Res Int       Date:  2017-09-10       Impact factor: 4.223

10.  Heavy metals contamination in urban surface soils of Medak province, India, and its risk assessment and spatial distribution.

Authors:  Narsimha Adimalla
Journal:  Environ Geochem Health       Date:  2019-03-07       Impact factor: 4.609

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.