Literature DB >> 27875101

Nonwoven textile for use in a nanoparticle respiratory deposition sampler.

Donna J H Vosburgh1, Jae Hong Park2, Levi W D Mines3, Imali A Mudunkotuwa4, T Renée Anthony3, Thomas M Peters3.   

Abstract

The nanoparticle respiratory deposition (NRD) sampler is a personal sampler that combines a cyclone, impactor, and a nylon mesh diffusion stage to measure a worker's exposure to nanoparticles. The concentration of titanium in the nylon mesh of the diffusion stage complicates the application of the NRD sampler for assessing exposures to titanium dioxide nanoparticles. This study evaluated commercially available nonwoven textiles for use as an alternative media in the diffusion stage of the NRD sampler. Three textiles were selected as containing little titanium from an initial screening of 11 textiles by field portable x-ray fluorescence (FPXRF). Further evaluation on these three textiles was conducted to determine the concentration of titanium and other metals by inductively coupled plasma-optical emission spectroscopy (ICP-OES), the number of layers required to achieve desired collection characteristics for use as the diffusion stage in the NRD sampler (i.e., the nanoparticulate matter, NPM, criterion), and the pressure drop associated with that number of layers.  Only three (two composed of cotton fibers, C1 and C2; and one of viscose bamboo and cotton fibers, BC) of 11 textiles screened had titanium concentrations below the limit of detection the XRF device (0.15 µg/cm2). Multiple metals, including small amounts of titanium, were found in each of the three nonwoven textiles using ICP-OES. The number of 25-mm-diameter layers required to achieve the collection efficiency by size required for the NRD sampler was three for C1 (R2 = 0.95 with reference to the NPM criterion), two for C2 (R2 = 0.79), and three for BC (R2 = 0.87). All measured pressure drops were less than theoretical and even the greatest pressure drop of 65.4 Pa indicated that a typical personal sampling pump could accommodate any of the three nonwoven textiles in the NRD sampler. The titanium concentration, collection efficiency, and measured pressure drops show there is a potential for nonwoven textiles to be used as the diffusion stage of the NRD sampler.

Entities:  

Keywords:  Diffusion; nanoparticle; nonwoven; sampler; textile

Mesh:

Substances:

Year:  2017        PMID: 27875101      PMCID: PMC5581958          DOI: 10.1080/15459624.2016.1263391

Source DB:  PubMed          Journal:  J Occup Environ Hyg        ISSN: 1545-9624            Impact factor:   2.155


  7 in total

1.  A strategy for assessing workplace exposures to nanomaterials.

Authors:  Gurumurthy Ramachandran; Michele Ostraat; Douglas E Evans; Mark M Methner; Patrick O'Shaughnessy; James D'Arcy; Charles L Geraci; Edward Stevenson; Andrew Maynard; Keith Rickabaugh
Journal:  J Occup Environ Hyg       Date:  2011-11       Impact factor: 2.155

2.  A Granular Bed for Use in a Nanoparticle Respiratory Deposition Sampler.

Authors:  Jae Hong Park; Imali A Mudunkotuwa; Levi W D Mines; T Renée Anthony; Vicki H Grassian; Thomas M Peters
Journal:  Aerosol Sci Technol       Date:  2015-02-03       Impact factor: 2.908

3.  A personal nanoparticle respiratory deposition (NRD) sampler.

Authors:  Lorenzo G Cena; T Renée Anthony; Thomas M Peters
Journal:  Environ Sci Technol       Date:  2011-07-13       Impact factor: 9.028

4.  Accurate quantification of tio2 nanoparticles collected on air filters using a microwave-assisted acid digestion method.

Authors:  Imali A Mudunkotuwa; T Renée Anthony; Vicki H Grassian; Thomas M Peters
Journal:  J Occup Environ Hyg       Date:  2016       Impact factor: 2.155

5.  Evaluation of Minnesota and Illinois hospital respiratory protection programs and health care worker respirator use.

Authors:  Lisa M Brosseau; Lorraine M Conroy; Margaret Sietsema; Kari Cline; Kara Durski
Journal:  J Occup Environ Hyg       Date:  2015       Impact factor: 2.155

6.  Tortuously structured polyvinyl chloride/polyurethane fibrous membranes for high-efficiency fine particulate filtration.

Authors:  Na Wang; Aikifa Raza; Yang Si; Jianyong Yu; Gang Sun; Bin Ding
Journal:  J Colloid Interface Sci       Date:  2013-02-22       Impact factor: 8.128

7.  A novel method for assessing respiratory deposition of welding fume nanoparticles.

Authors:  L G Cena; M J Keane; W P Chisholm; S Stone; M Harper; B T Chen
Journal:  J Occup Environ Hyg       Date:  2014       Impact factor: 2.155

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.