Literature DB >> 27852497

Preventing Instrumentation Failure in Three-Column Spinal Osteotomy: Biomechanical Analysis of Rod Configuration.

Zachary S Jager1, Serkan İnceoğlu1, Daniel Palmer1, Yusuf T Akpolat1, Wayne K Cheng2.   

Abstract

STUDY
DESIGN: Biomechanical analysis.
OBJECTIVES: To show the role of additional rods and long-term fatigue strength to prevent the instrumentation failure on three-column osteotomies. SUMMARY OF BACKGROUND DATA: Three-column osteotomy such as pedicle subtraction osteotomy (PSO) and vertebral column resections are surgical correction options for fixed spinal deformity. Posterior fixation for the PSO involves pedicle screw-and rod-based instrumentation, with the rods being contoured to accommodate the accentuated lordosis. Pseudarthrosis and instrumentation failure are known complications of PSO.
METHODS: Unilateral pedicle screw and rod constructs were mounted in ultra-high-molecular-weight polyethylene blocks using a vertebrectomy model with the rods contoured to simulate posterior fixation of a PSO. Each construct was cycled under a 200 N load at 5 Hz in simulated flexion and extension to rod failure. Three configurations (n = 5) of titanium alloy rods were tested: single rod (control), double rod, and bridging rod. Outcomes were total cycles to failure and location of rod failure.
RESULTS: Double-rod and bridging-rod constructs had a significantly higher number of cycles to failure compared with the single-rod construct (p < .05). Single-rod constructs failed at or near the rod bend apex, whereas the majority of double-rod and bridging-rod constructs failed at the screw-rod or rod-connector junction.
CONCLUSIONS: Double-rod and bridging-rod constructs are more resistant to fatigue failure compared with single-rod constructs in PSO instrumentation and could be considered to mitigate the risk of instrumentation failure.
Copyright © 2016 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.

Entities:  

Keywords:  Bridging rod; Double rod; Pedicle subtraction osteotomy; Sagittal imbalance; Spinal rod failure

Mesh:

Substances:

Year:  2015        PMID: 27852497     DOI: 10.1016/j.jspd.2015.06.005

Source DB:  PubMed          Journal:  Spine Deform        ISSN: 2212-134X


  7 in total

1.  Supplementary delta-rod configurations provide superior stiffness and reduced rod stress compared to traditional multiple-rod configurations after pedicle subtraction osteotomy: a finite element study.

Authors:  Pedro Berjano; Ming Xu; Marco Damilano; Thomas Scholl; Claudio Lamartina; Michael Jekir; Fabio Galbusera
Journal:  Eur Spine J       Date:  2019-05-25       Impact factor: 3.134

2.  Minimally invasive multiple-rod constructs with robotics planning in adult spinal deformity surgery: a case series.

Authors:  Martin H Pham; Vrajesh J Shah; Luis Daniel Diaz-Aguilar; Joseph A Osorio; Ronald A Lehman
Journal:  Eur Spine J       Date:  2021-10-01       Impact factor: 3.134

Review 3.  RCC (reinforced criss-cross construct): an easy and effective multi-rod thoraco-lumbar posterior reconstruction technique.

Authors:  Ajay Krishnan; Aditya Raj; Umesh Meena; Devanand Degulmadi; Ravi Ranjan Rai; Shivanand Mayi; Mirant Dave; Bharat R Dave
Journal:  Spine Deform       Date:  2022-04-09

Review 4.  [Pseudarthrosis and construct failure after lumbar pedicle subtraction osteotomy : Influence of biomechanics, surgical technique, biology and avoidance strategies].

Authors:  C Birkenmaier
Journal:  Orthopade       Date:  2018-04       Impact factor: 1.087

5.  C2 quad-screws facilitate 4-rod fixation across the cervico-thoracic junction.

Authors:  Clarke I Cady-McCrea; Michael A Galgano
Journal:  Surg Neurol Int       Date:  2021-02-03

6.  Biomechanical study of rod stress after pedicle subtraction osteotomy versus anterior column reconstruction: A finite element study.

Authors:  Jacob Januszewski; Joshua M Beckman; Jeffrey E Harris; Alexander W Turner; Chun Po Yen; Juan S Uribe
Journal:  Surg Neurol Int       Date:  2017-09-06

7.  Tulip-Screw Head Disjunction from Posterior C2 Fracture Fixation Instrumentation.

Authors:  Halle E K Burley; Darius S Ansari; Alexander von Glinski; Ryan Goodmanson; Benjamin Schell; Jens R Chapman; Rod J Oskouian
Journal:  Case Rep Orthop       Date:  2020-02-24
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.