Physical and chemical treatment of end of life panels: An integrated automatic approach viable for different photovoltaic technologies.

Different kinds of panels (Si-based panels and CdTe panels) were treated according to a common process route made up of two main steps: a physical treatment (triple crushing and thermal treatment) and a chemical treatment. After triple crushing three fractions were obtained: an intermediate fraction (0.4-1mm) of directly recoverable glass (17%w/w); a coarse fraction (>1mm) requiring further thermal treatment in order to separate EVA-glued layers in glass fragments; a fine fraction (<0.4mm) requiring chemical treatment to dissolve metals and obtain another recoverable glass fraction. Coarse fractions (62%w/w) were treated thermally giving another recoverable glass fraction (52%w/w). Fine fractions can be further sieved into two sub-fractions: <0.08mm (3%w/w) and 0.08-0.4mm (22%w/w). Chemical characterization showed that 0.08-0.4mm fractions mainly contained Fe, Al and Zn, while precious and dangerous metals (Ag, Ti, Te, Cu and Cd) are mainly present in fractions <0.08mm. Acid leaching of 0.08-0.4mm fractions allowed to obtain a third recoverable glass fraction (22%w/w). The process route allowed to treat by the same scheme of operation both Si based panels and Cd-Te panels with an overall recycling rate of 91%.