Literature DB >> 27824463

Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion.

Qiming Wang1, Julie A Jackson2, Qi Ge3,4, Jonathan B Hopkins5, Christopher M Spadaccini2, Nicholas X Fang3.   

Abstract

Ice floating on water is a great manifestation of negative thermal expansion (NTE) in nature. The limited examples of natural materials possessing NTE have stimulated research on engineered structures. Previous studies on NTE structures were mostly focused on theoretical design with limited experimental demonstration in two-dimensional planar geometries. In this work, aided with multimaterial projection microstereolithography, we experimentally fabricate lightweight multimaterial lattices that exhibit significant negative thermal expansion in three directions and over a temperature range of 170 degrees. Such NTE is induced by the structural interaction of material components with distinct thermal expansion coefficients. The NTE can be tuned over a large range by varying the thermal expansion coefficient difference between constituent beams and geometrical arrangements. Our experimental results match qualitatively with a simple scaling law and quantitatively with computational models.

Entities:  

Year:  2016        PMID: 27824463     DOI: 10.1103/PhysRevLett.117.175901

Source DB:  PubMed          Journal:  Phys Rev Lett        ISSN: 0031-9007            Impact factor:   9.161


  25 in total

1.  Cellular fluidics.

Authors:  Nikola A Dudukovic; Erika J Fong; Hawi B Gemeda; Joshua R DeOtte; Maira R Cerón; Bryan D Moran; Jonathan T Davis; Sarah E Baker; Eric B Duoss
Journal:  Nature       Date:  2021-06-30       Impact factor: 49.962

Review 2.  A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization.

Authors:  Usman Shaukat; Elisabeth Rossegger; Sandra Schlögl
Journal:  Polymers (Basel)       Date:  2022-06-16       Impact factor: 4.967

Review 3.  Emerging Technologies in Multi-Material Bioprinting.

Authors:  Hossein Ravanbakhsh; Vahid Karamzadeh; Guangyu Bao; Luc Mongeau; David Juncker; Yu Shrike Zhang
Journal:  Adv Mater       Date:  2021-10-01       Impact factor: 32.086

4.  Photosynthesis-assisted remodeling of three-dimensional printed structures.

Authors:  Kunhao Yu; Zhangzhengrong Feng; Haixu Du; An Xin; Kyung Hoon Lee; Ketian Li; Yipin Su; Qiming Wang; Nicholas X Fang; Chiara Daraio
Journal:  Proc Natl Acad Sci U S A       Date:  2021-01-19       Impact factor: 12.779

5.  Origami lattices with free-form surface ornaments.

Authors:  Shahram Janbaz; Niels Noordzij; Dwisetya S Widyaratih; Cornelis W Hagen; Lidy E Fratila-Apachitei; Amir A Zadpoor
Journal:  Sci Adv       Date:  2017-11-29       Impact factor: 14.136

6.  Elastic properties of superconductors and materials with weakly correlated spins.

Authors:  Christian Binek
Journal:  Sci Rep       Date:  2017-07-07       Impact factor: 4.379

7.  Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves.

Authors:  Hang Zhang; Xiaogang Guo; Jun Wu; Daining Fang; Yihui Zhang
Journal:  Sci Adv       Date:  2018-06-08       Impact factor: 14.136

8.  3D-Printed Complex Microstructures with a Self-Sacrificial Structure Enabled by Grayscale Polymerization and Ultrasonic Treatment.

Authors:  Yibo Liao; Wenhao Li; Ziheng Zhan; Huigao Duan; Peng Liu; Yiqin Chen; Zhaolong Wang
Journal:  ACS Omega       Date:  2021-07-08

9.  Computational discovery of extremal microstructure families.

Authors:  Desai Chen; Mélina Skouras; Bo Zhu; Wojciech Matusik
Journal:  Sci Adv       Date:  2018-01-19       Impact factor: 14.136

10.  Dielectric meta-atom with tunable resonant frequency temperature coefficient.

Authors:  Lingling Wu; Xiaoqing Xi; Bo Li; Ji Zhou
Journal:  Sci Rep       Date:  2017-05-31       Impact factor: 4.379

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.