| Literature DB >> 27770913 |
Wenqin Wu1, Beibei Yu1, Huimin Wu2, Shengfu Wang1, Qinghua Xia1, Yu Ding3.
Abstract
Different phases of cobalt sulfides have been fabricated by one-pot hydrothermal method. Comparing all of the prepared materials, and the results revealed that CoS was the most conductive and could accelerate electron transfer. The CoS presented tremella-like and excellent catalytic activities towards hydrogen peroxide and glucose. The sensor based on CoS performed amperometric sensing of hydrogen peroxide in a linear range between 5.00μM and 14.82mM. Meanwhile, sensing of glucose with double-linear range, one is between 5.00μM and 1.10mM, the other is between 1.20mM and 10.20mM. These due to the fact that more and more intermediate species absorb onto electrode surface with increasing the concentration of glucose, which limit the following glucose oxidation. Furthermore, the hydrogen peroxide and glucose sensors based on tremella-like CoS also exhibited excellent selectivity, stability, and reproducibility. Thus, the sensor showed potential utilities in hydrogen peroxide and glucose detection.Entities:
Keywords: Electrocatalysis; Glucose sensor; Non-enzymatic hydrogen peroxide sensor; Tremella-like CoS
Mesh:
Substances:
Year: 2016 PMID: 27770913 DOI: 10.1016/j.msec.2016.08.084
Source DB: PubMed Journal: Mater Sci Eng C Mater Biol Appl ISSN: 0928-4931 Impact factor: 7.328