Literature DB >> 27765964

Properties and storage stability of whey protein edible film with spice powders.

Apisada Ket-On1, Natkritta Pongmongkol1, Anongnat Somwangthanaroj2, Theeranun Janjarasskul1, Kanitha Tananuwong1.   

Abstract

The impact of spice powders on physical, mechanical, thermal and barrier properties, and on storage stability, of whey protein isolate (WPI)-based films was determined. Films with added spices were prepared from casting solution containing 10 % (w/w) heat-denatured WPI, glycerol (WPI:glycerol of 3:2 w/w), sodium chloride (0.4 g/100 g solution), garlic and pepper powders (≤3 g each/100 g solution). Water activity (aw) of all films was 0.53-0.57. Addition of spice powders increased thickness, darkness and yellowness of the WPI films. Films with added spices had lower tensile strength (TS), percent elongation (%E), and melting enthalpy of WPI matrices, but possessed higher water vapor permeability (WVP) than WPI film without sodium chloride and spices. The WPI film containing highest amount of garlic powder and lowest amount of pepper powder was selected for storage tests at 25-45 °C. Storage for up to 49 days resulted in reduced aw and %E, increased TS, and color changes at 35 and 45 °C, with few changes at 25 °C. However, film WVP and OP were not affected by storage conditions after 7 days storage. Active ingredients decreased over time with up to 81 % allicin and 37 % piperine retained in the film matrix after 47 days storage.

Entities:  

Keywords:  Edible film; Spice powder; Storage stability; Whey protein isolate

Year:  2016        PMID: 27765964      PMCID: PMC5052162          DOI: 10.1007/s13197-016-2259-z

Source DB:  PubMed          Journal:  J Food Sci Technol        ISSN: 0022-1155            Impact factor:   2.701


  10 in total

Review 1.  Edible packaging materials.

Authors:  Theeranun Janjarasskul; John M Krochta
Journal:  Annu Rev Food Sci Technol       Date:  2010

2.  Aging of whey protein films and the effect on mechanical and barrier properties.

Authors:  M Anker; M Stading; A M Hermansson
Journal:  J Agric Food Chem       Date:  2001-02       Impact factor: 5.279

3.  Whey protein film with oxygen scavenging function by incorporation of ascorbic acid.

Authors:  Theeranun Janjarasskul; Kanitha Tananuwong; John M Krochta
Journal:  J Food Sci       Date:  2011-10-20       Impact factor: 3.167

4.  Physical properties of whey protein coating solutions and films containing antioxidants.

Authors:  J H Han; J M Krochta
Journal:  J Food Sci       Date:  2007-06       Impact factor: 3.167

5.  Antimicrobial activity and hydrophobicity of edible whey protein isolate films formulated with nisin and/or glucose oxidase.

Authors:  María M Murillo-Martínez; Salvador R Tello-Solís; Miguel A García-Sánchez; Edith Ponce-Alquicira
Journal:  J Food Sci       Date:  2013-03-12       Impact factor: 3.167

6.  Common Indian spices: nutrient composition, consumption and contribution to dietary value.

Authors:  K Uma Pradeep; P Geervani; B O Eggum
Journal:  Plant Foods Hum Nutr       Date:  1993-09       Impact factor: 3.921

7.  A spectrophotometric assay for allicin, alliin, and alliinase (alliin lyase) with a chromogenic thiol: reaction of 4-mercaptopyridine with thiosulfinates.

Authors:  Talia Miron; Irina Shin; Guy Feigenblat; Lev Weiner; David Mirelman; Meir Wilchek; Aharon Rabinkov
Journal:  Anal Biochem       Date:  2002-08-01       Impact factor: 3.365

8.  Thermal transitions and extrusion of glycerol-plasticized whey protein mixtures.

Authors:  V M Hernandez-Izquierdo; D S Reid; T H McHugh; J De J Berrios; J M Krochta
Journal:  J Food Sci       Date:  2008-05       Impact factor: 3.167

9.  Mechanical and water barrier properties of glutenin films influenced by storage time.

Authors:  Pilar Hernández-Muñoz; Amparo López-Rubio; Valeria Del-Valle; Eva Almenar; Rafael Gavara
Journal:  J Agric Food Chem       Date:  2004-01-14       Impact factor: 5.279

Review 10.  Allicin: chemistry and biological properties.

Authors:  Jan Borlinghaus; Frank Albrecht; Martin C H Gruhlke; Ifeanyi D Nwachukwu; Alan J Slusarenko
Journal:  Molecules       Date:  2014-08-19       Impact factor: 4.411

  10 in total
  5 in total

1.  3D Printed gelatin film with Garcinia atroviridis extract.

Authors:  Kai Lin Yap; Ianne Kong; Lejaniya Abdul Kalam Saleena; Liew Phing Pui
Journal:  J Food Sci Technol       Date:  2022-06-18       Impact factor: 3.117

2.  Development and Characterization of the Biodegradable Film Derived from Eggshell and Cornstarch.

Authors:  Joseph Merillyn Vonnie; Kobun Rovina; Rasnarisa Awatif Azhar; Nurul Huda; Kana Husna Erna; Wen Xia Ling Felicia; Md Nasir Nur'Aqilah; Nur Fatihah Abdul Halid
Journal:  J Funct Biomater       Date:  2022-05-27

3.  Antimicrobial Activity, Microstructure, Mechanical, and Barrier Properties of Cassava Starch Composite Films Supplemented With Geranium Essential Oil.

Authors:  Bin Wang; Shouxin Yan; Lizhong Qiu; Wei Gao; Xuemin Kang; Bin Yu; Pengfei Liu; Bo Cui; A M Abd El-Aty
Journal:  Front Nutr       Date:  2022-05-11

4.  Edible films developed from carboxylic acid cross-linked sesame protein isolate: barrier, mechanical, thermal, crystalline and morphological properties.

Authors:  Loveleen Sharma; Harish Kumar Sharma; Charanjiv Singh Saini
Journal:  J Food Sci Technol       Date:  2017-11-18       Impact factor: 2.701

5.  Black Edible Films from Protein-Containing Defatted Cake of Nigella sativa Seeds.

Authors:  Mohammed Sabbah; Mohammad Altamimi; Prospero Di Pierro; Chiara Schiraldi; Marcella Cammarota; Raffaele Porta
Journal:  Int J Mol Sci       Date:  2020-01-28       Impact factor: 5.923

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.