Simultaneous removing of Pb2+ ions and alizarin red S dye after their complexation by ultrasonic waves coupled adsorption process: Spectrophotometry detection and optimization study.

Funthenalized chitosan (CS) was composited with mesoprous SBA-15 and characterized via. different techniques such as FT-IR and FE-SEM. Subsequently, this new material was applied for simulations ultrasound-assisted adsorption of Pb2+ ion and alizarin red S (ARS) dye after their complexation. Efficient conventional variables in adsorption process such as initial ARS and Pb2+ concentration, adsorbent mass and sonication time were studied by small central composite design (CCD) and optimized with desirability function approach. Lack of fit testes and model summary statistics for linear, 2FI, quadratic and cubic models were investigated and according to the insignificant lack of fit and maximizing the R-squared (R2), adjusted R-squared and the predicted R-squared quadratic model was selected for other step analysis for removal of ARS dye, while, for Pb2+ ions 2FI model was selected as best model. Quadratic model ANOVA for ARS dye removal shows the F-value parameter (683.91), very low p-value model (<0.0001) and p-value lack of fit (0.0568) that implied this model was highly significant. Also, 2FI model ANOVA for Pb2+ ions removal shows the F-value parameter (282.51), very low p-value model (<0.0001) and p-value lack of fit (2.05). According to desirability function approach maximum removal percentage of ARS (87.61%) and Pb2+ ions (83.54%) was shown at optimum of condition that were set as at: 25 and 25mgL-1, 0.028g and 11.8min for initial ARS and Pb2+ ions concentration, adsorbent mass and sonication time, respectively. Finally, it was found that the equilibrium and kinetic of adsorption process follow the Langmuir isotherm and pseudo-second-order kinetic model, respectively. From the Langmuir isotherm, maximum monolayer capacity (qmax) was obtained 50.25 and 57.14mgg-1 for ARS and Pb2+ ions removal, respectively. Copyright Â