Mercury in river, estuarine and seawaters - Is it possible to decrease realist environmental concentrations in order to achieve environmental quality standards?

Dithiocarbamate-functionalized magnetite nanoparticles (Fe3O4@SiO2/SiDTC) have been investigated as a convenient and effective sorbent for mercury removal from river, estuarine and sea waters, and their capability to decrease realistic environmental concentrations to the new environmental quality standards was evaluated. The sorption kinetics was well described by the Elovich model and the initial sorption rate was dependent of the sorbent dose. Except for river water sample, the Fe3O4@SiO2/SiDTC particles uptake 99.9% or more of the Hg(II) in the waters (initially at the concentration of 50 μg/L), allowing to reach residual concentrations lower than the new environmental quality standards (70 ng/L) with only 10 mg/L of sorbent material. The distribution coefficients of mercuric ions between the magnetic particles and the different natural water types were above 103 mL/g for the river water and above 105 mL/g for the estuarine and sea waters. The differences observed between the water types can be attributed to different water composition (effect of the matrix), which plays an important role in the efficiency of the water treatment.