Warning: Undefined array key "mm" in /www/wwwroot/www.ai-bt.com/si.php on line 10 Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in /www/wwwroot/www.ai-bt.com/si.php on line 10 3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics.

Literature DB >> 27677912

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics.

Clara Minas¹, Davide Carnelli¹, Elena Tervoort¹, André R Studart¹.

Abstract

Bulk hierarchical porous ceramics with unprecedented strength-to-weight ratio and tunable pore sizes across three different length scales are printed by direct ink writing. Such an extrusion-based process relies on the formulation of inks in the form of particle-stabilized emulsions and foams that are sufficiently stable to resist coalescence during printing.

Keywords: ceramic scaffolds; direct ink writing; emulsion templating; hierarchical porosity; mechanical strength

Year: 2016 PMID： 27677912 DOI： 10.1002/adma.201603390

Source DB: PubMed Journal: Adv Mater ISSN： 0935-9648 Impact factor: 30.849

Keyword Cloud
Cited

26 in total

1. Architected cellular ceramics with tailored stiffness via direct foam writing.

Authors: Joseph T Muth; Patrick G Dixon; Logan Woish; Lorna J Gibson; Jennifer A Lewis
Journal: Proc Natl Acad Sci U S A Date: 2017-02-08 Impact factor: 11.205

2. Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties.

Authors: Zhuoran Jiang; Ozan Erol; Devina Chatterjee; Weinan Xu; Narutoshi Hibino; Lewis H Romer; Sung Hoon Kang; David H Gracias
Journal: ACS Appl Mater Interfaces Date: 2019-07-23 Impact factor: 9.229

3. 3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications.

Authors: Emilio O Bachtiar; Ozan Erol; Michal Millrod; Runhan Tao; David H Gracias; Lewis H Romer; Sung Hoon Kang
Journal: J Mech Behav Biomed Mater Date: 2020-01-23

4. Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications.

Authors: Ellen Cesewski; Alexander P Haring; Yuxin Tong; Manjot Singh; Rajan Thakur; Sahil Laheri; Kaitlin A Read; Michael D Powell; Kenneth J Oestreich; Blake N Johnson
Journal: Lab Chip Date: 2018-07-10 Impact factor: 6.799

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics.

1. Architected cellular ceramics with tailored stiffness via direct foam writing.

2. Direct Ink Writing of Poly(tetrafluoroethylene) (PTFE) with Tunable Mechanical Properties.

3. 3D printing and characterization of a soft and biostable elastomer with high flexibility and strength for biomedical applications.

4. Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications.

5. On-demand modulation of 3D-printed elastomers using programmable droplet inclusions.

6. Printable homocomposite hydrogels with synergistically reinforced molecular-colloidal networks.

7. 3D printing of robotic soft actuators with programmable bioinspired architectures.

8. Stiffness-Independent Toughening of Beams through Coaxial Interfaces.

9. 3D printing of bacteria into functional complex materials.

10. Bioinspired polymeric woods.