Francesca Buttini1,2, James Hannon3, Kristi Saavedra3, Irene Rossi1, Anna Giulia Balducci1,4, Hugh Smyth3,5, Andy Clark3,6, Paolo Colombo7. 1. Department of Pharmacy, University of Parma, Parco Area delle Scienze, 43124, Parma, Italy. 2. Institute of Pharmaceutical Science, King's College London, 150 Stamford Street, SE19NH, London, UK. 3. Respira Therapeutics Inc., Albuquerque, New Mexico, USA. 4. Chiesi Limited, Bath Road Industrial Estate, Chippenham, Wiltshire, SN14 0AB, UK. 5. College of Pharmacy, The University of Texas at Austin, Austin, Texas, 78712, USA. 6. Aerogen Pharma Corporation, San Mateo, California, USA. 7. Department of Pharmacy, University of Parma, Parco Area delle Scienze, 43124, Parma, Italy. paolo.colombo@unipr.it.
Abstract
PURPOSE: In this work, a novel powder dispersion add-on device, the AOS (Axial Oscillating Sphere), was studied in conjunction with commercially available DPI devices to improve the powder dispersion. METHODS: An ordered mixture of formoterol fumarate and lactose was selected. We studied in two laboratories located at different altitudes the dispensing and dispersion of the drug at different flow rates, paying particular attention to a number of metrics of Fine Particle Dose (FPD). RESULTS: Two novel findings emerged from the data collected. First, the aerosol quality, measured as fine particle dose, can be increased by adding the accessory promoting the dispersion and de-aggregation of the formulation. The second finding was that, albeit the emitted dose was independent of altitude, the drug/lactose carrier DPI aerosolizing performance changed with the altitude of testing. In particular, fine particle dose depended on both altitude and device configuration. The RS01 inhaler without the AOS accessory used at higher altitude gave the lowest FPD values. By combining the AOS accessory with the DPI, however, the performance dependence on altitude/atmospheric pressure was essentially removed. CONCLUSIONS: Increasing inhaler performance can be achieved using an add-on accessory that enhances aerosol dispersion and minimizes flow rate dependency.
PURPOSE: In this work, a novel powder dispersion add-on device, the AOS (Axial Oscillating Sphere), was studied in conjunction with commercially available DPI devices to improve the powder dispersion. METHODS: An ordered mixture of formoterol fumarate and lactose was selected. We studied in two laboratories located at different altitudes the dispensing and dispersion of the drug at different flow rates, paying particular attention to a number of metrics of Fine Particle Dose (FPD). RESULTS: Two novel findings emerged from the data collected. First, the aerosol quality, measured as fine particle dose, can be increased by adding the accessory promoting the dispersion and de-aggregation of the formulation. The second finding was that, albeit the emitted dose was independent of altitude, the drug/lactose carrier DPI aerosolizing performance changed with the altitude of testing. In particular, fine particle dose depended on both altitude and device configuration. The RS01 inhaler without the AOS accessory used at higher altitude gave the lowest FPD values. By combining the AOS accessory with the DPI, however, the performance dependence on altitude/atmospheric pressure was essentially removed. CONCLUSIONS: Increasing inhaler performance can be achieved using an add-on accessory that enhances aerosol dispersion and minimizes flow rate dependency.
Authors: Jordan T F Titosky; Chelsea M D Morin; Jonathan D Suderman; Jason S Olfert; Warren H Finlay; Reinhard Vehring Journal: J Pharm Sci Date: 2014-06-02 Impact factor: 3.534