PURPOSE: To model the effect of pupil size, optical zone, and initial myopic level on the retinal image quality after Q-optimized myopic corneal refractive surgery. METHODS: Different Q-optimized and paraxial Munnerlyn algorithms were tested using a schematic myopic eye model to analyze the optical quality of the final retinal image for initial myopic errors from -1.00 to -7.00 diopters (D). Different optical zones (5.5, 6, and 6.5 mm in diameter) and two pupil diameters (5 and 7 mm, mesopic-scotopic conditions) were included in the comparison. Modulation transfer function (MTF) and area under the MTF from 0 to 60 cycles per degree (MTFa) were calculated by ray tracing to evaluate this retinal image quality. RESULTS: The Q-optimized algorithm with Q = -0.45 provided the highest MTF and MTFa results for myopic corrections less than -5.00 D. For refractive errors greater than -5.00 D, Q = -0.26 provided the highest MTF and MTFa results. CONCLUSIONS: Q-optimized algorithms improve the visual outcomes with respect to the paraxial Munnerlyn algorithm for myopic corneal surgery. The results show that the Q value that optimizes the results of the Q-optimized algorithm depends on the degree of myopia to correct and the size of the pupil. [J Refract Surg. 2016;32(9):612-617.]. Copyright 2016, SLACK Incorporated.
PURPOSE: To model the effect of pupil size, optical zone, and initial myopic level on the retinal image quality after Q-optimized myopic corneal refractive surgery. METHODS: Different Q-optimized and paraxial Munnerlyn algorithms were tested using a schematic myopic eye model to analyze the optical quality of the final retinal image for initial myopic errors from -1.00 to -7.00 diopters (D). Different optical zones (5.5, 6, and 6.5 mm in diameter) and two pupil diameters (5 and 7 mm, mesopic-scotopic conditions) were included in the comparison. Modulation transfer function (MTF) and area under the MTF from 0 to 60 cycles per degree (MTFa) were calculated by ray tracing to evaluate this retinal image quality. RESULTS: The Q-optimized algorithm with Q = -0.45 provided the highest MTF and MTFa results for myopic corrections less than -5.00 D. For refractive errors greater than -5.00 D, Q = -0.26 provided the highest MTF and MTFa results. CONCLUSIONS: Q-optimized algorithms improve the visual outcomes with respect to the paraxial Munnerlyn algorithm for myopic corneal surgery. The results show that the Q value that optimizes the results of the Q-optimized algorithm depends on the degree of myopia to correct and the size of the pupil. [J Refract Surg. 2016;32(9):612-617.]. Copyright 2016, SLACK Incorporated.