Yuyan Wei1, Liang Li2, Xiaoming Yang3, Guoliang Pan1, Guoping Yan1, Xianghua Yu1. 1. Key Laboratory for Green Chemical Process of Ministry of Education, School of Materials Science and Engineering, Wuhan Institute of Technology, State Key Laboratory of Coordination Chemistry, Nanjing University, 430073, Wuhan, People's Republic of China. 2. Key Laboratory for Green Chemical Process of Ministry of Education, School of Materials Science and Engineering, Wuhan Institute of Technology, State Key Laboratory of Coordination Chemistry, Nanjing University, 430073, Wuhan, People's Republic of China. msell08@163.com. 3. College of Chemistry, Chemical Engineering and Materials Sciences, Soochow University, 215123, Suzhou, People's Republic of China. yangxiaoming@suda.edu.cn.
Erratum to: Nanoscale Res. Lett. (2010) 5:433–437 DOI 10.1007/s11671-009-9501-9
Figure 1a and Fig. 2 have been published incorrectly. The correct version of Figs. 1a and 2 in the original article is provided below:
Figure 1
TEM images of PPy/Ag nanocomposites prepared at [AgNO3]/[pyrrole] of 0.8 with (a) and without (b) of PVP
Figure 2
TEM images of PPy/Ag nanocomposites prepared at [AgNO3]/[pyrrole] of 0.2 (a) and 0.5 (b)
TEM images of PPy/Ag nanocomposites prepared at [AgNO3]/[pyrrole] of 0.8 with (a) and without (b) of PVPTEM images of PPy/Ag nanocomposites prepared at [AgNO3]/[pyrrole] of 0.2 (a) and 0.5 (b)The 8th line of the Results and Discussion section on page 434 should read as follows:“PPy/Ag nanocomposite, with the size range of 100–180 nm”.The 4th line on page 435 should read:“Diameter of 100–180 nm was uniform in size and well dispersed”.