| Literature DB >> 27436710 |
Ken N Okada1,2, Youtarou Takahashi1,2,3, Masataka Mogi2, Ryutaro Yoshimi1,2, Atsushi Tsukazaki3,4, Kei S Takahashi1,3, Naoki Ogawa1, Masashi Kawasaki1,2, Yoshinori Tokura1,2.
Abstract
Electrodynamic responses from three-dimensional topological insulators are characterized by the universal magnetoelectric term constituent of the Lagrangian formalism. The quantized magnetoelectric coupling, which is generally referred to as topological magnetoelectric effect, has been predicted to induce exotic phenomena including the universal low-energy magneto-optical effects. Here we report the experimental indication of the topological magnetoelectric effect, which is exemplified by magneto-optical Faraday and Kerr rotations in the quantum anomalous Hall states of magnetic topological insulator surfaces by terahertz magneto-optics. The universal relation composed of the observed Faraday and Kerr rotation angles but not of any material parameters (for example, dielectric constant and magnetic susceptibility) well exhibits the trajectory towards the fine structure constant in the quantized limit.Entities:
Year: 2016 PMID: 27436710 PMCID: PMC4961790 DOI: 10.1038/ncomms12245
Source DB: PubMed Journal: Nat Commun ISSN: 2041-1723 Impact factor: 14.919
Figure 1THz Faraday and Kerr rotation of QAH state on magnetic TI film.
(a) Schematics of the TI film with magnetic modulation doping and of the band structure of surface states under the presence of time-reversal-symmetry breaking magnetization. (b) Temperature dependence of the longitudinal (σ) and Hall (σ) conductances at B=0.1 T. (c) Magnetic field dependence of σ at various temperatures. (d) Schematics of the THz magneto-optics for the magnetic TI film on an InP substrate. Crossed-Nicol geometry was employed for the detection of the magneto-optical rotation of light polarization. Faraday and Kerr rotations are measured by the first THz pulse (i) and the second THz pulse (ii), respectively. (e) Time evolutions of THz pulses through the magnetic TI film at 0 T after the poling of magnetic moment. (See Methods for detail.) E and E are transmitted light polarized parallel and perpendicular to the incident light, respectively. The first pulse (i) represents the directly transmitted light through the TI film and substrate, while the THz pulse once reflected at back surface of substrate appears as the second pulse (ii) with a time delay. E component of the second pulse includes the Kerr rotation θK at back-surface of TI film as well as the Faraday rotation θF.
Figure 2THz Faraday and Kerr rotation spectra of the magnetic TI film.
(a) Transmittance (left ordinate) spectra of the magnetic TI film at various temperatures and optical conductance (right ordinate) σ spectrum at T=4.3 K. The transmittance close to unity was observed, indicating the negligible carrier absorptions due to fine-tuning of the Fermi level within the magnetic mass-gap of the surface state. The low-lying optical phonon mode is discerned as a tiny dip around 7 meV and also as the peak of optical conductance spectrum. (b,c) Complex Faraday (b) and Kerr (c) rotation spectra at 1.5 K (see the main text and Methods for definition). The real parts (θF and θK) represent the rotation angle of light polarization. The imaginary parts (ηF and ηK) represent the ellipticity, which is negligibly small as expected. Rotation angles at ω=0 evaluated from the d.c. transport data (Fig. 1c) are also plotted on the left ordinates. (d) Temperature dependence of the Faraday (red) and Kerr (blue) rotation spectra with the evaluated ω=0 values on the ordinates. The error bars in b–d are evaluated by s.e.m. of several runs of measurement.
Figure 3Trajectory towards the quantized TME response.
Closed circles correspond to the rotation spectra in Fig. 2b–d. Closed triangles represent the data of another different sample. Open symbols represent the data at B=1 T. (a,b) Faraday (red) and Kerr (blue) rotation angles versus temperature (a) and d.c. Hall conductance σd.c. (Fig. 1c) (b). The rotation angles and their error bars in a,b are determined by the mean and s.d. of the rotation angle spectra below∼4 meV, respectively. The solid lines in b represent the estimation from equations (1) and (2) in the main text. (c) Evolution of the scaling function (see the main text and equation (3)) without any material parameters as a function of d.c. Hall conductance, which is expected to reach the fine structure constant α (=2πe2/hc∼1/137) in the quantized limit, as indicated by a straight line. The error bars of f (θF, θK) are determined by its total derivative calculated from s.d. of θF and θK presented in a,b.