Phase reference in phase-sensitive sum-frequency vibrational spectroscopy.

Phase-sensitive sum-frequency vibrational spectroscopy (PS-SFVS) has been established as a powerful technique for surface characterization, but for it to generate a reliable spectrum, accurate phase measurement with a well-defined phase reference is most important. Incorrect phase measurement can lead to significant distortion of a spectrum, as recently seen in the case for the air/water interface. In this work, we show theoretically and experimentally that a transparent, highly nonlinear crystal, such as quartz and barium borate, can be a good phase reference if the surface is clean and unstrained and the crystal is properly oriented to yield a strong SF output. In such cases, the reflected SF signal is dominated by the bulk electric dipole contribution and its phase is either +90° or -90°. On the other hand, materials with inversion symmetry, such as water, fused quartz, and CaF2 are not good phase references due to the quadrupole contribution and phase dispersion at the interface. Using a proper phase reference in PS-SFVS, we have found the most reliable OH stretching spectrum for the air/water interface. The positive band at low frequencies in the imaginary component of the spectrum, which has garnered much interest and been interpreted by many to be due to strongly hydrogen-bonded water species, is no longer present. A weak positive feature however still exists. Its magnitude approximately equals to that of air/D2O away from resonances, suggesting that this positive feature is unrelated to surface resonance of water.