Literature DB >> 27348147

Tribocorrosion studies of metallic biomaterials: The effect of plasma nitriding and DLC surface modifications.

Guo-Hua Zhao1, Ragnhild E Aune2, Nuria Espallargas3.   

Abstract

The medical grade pure titanium, stainless steel and CoCrMo alloy have been utilized as biomaterials for load-bearing orthopedic prosthesis. The conventional surgery metals suffer from a combined effect of wear and corrosion once they are implanted, which may significantly accelerate the material degradation process. In this work, the tribocorrosion performance of the metallic biomaterials with different surface modifications was studied in the simulated body fluid for the purpose of investigating the effect of the surface treatments on the tribocorrosion performance and eventually finding the most suitable implantation materials. The metals were subjected to surface modifications by plasma nitriding in different treatment temperatures or physical vapor deposition (PVD) to produce diamond-like carbon (DLC) coating, respectively. The dry wear and tribocorrosion properties of the samples were evaluated by using a reciprocating ball-on-disc tribometer equipped with an electrochemical cell. Prior to the tribocorrosion tests, their electrochemical behavior was measured by the potentiodynamic polarization in phosphate buffer saline (PBS) solution at room temperature. Both stainless steel and CoCrMo after low temperature nitriding kept their passive nature by forming an expanded austenite phase. The DLC coated samples presented the low anodic corrosion current due to the chemical inertness of the carbon layer. During the tribocorrosion tests at open circuit potential, the untreated and low temperature nitrided samples exhibited significant potential drop towards the cathodic direction, which was a result of the worn out of the passive film. Galvanic coupling was established between the depassivated (worn) area and the still passive (unworn) area, making the materials suffered from wear-accelerated corrosion. The DLC coating performed as a solid lubricant in both dry wear and tribocorrosion tests, and the resulting wear after the tests was almost negligible.
Copyright © 2016 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Diamond-like carbon (DLC); Metallic biomaterials; Plasma nitriding; Tribocorrosion

Mesh:

Substances:

Year:  2016        PMID: 27348147     DOI: 10.1016/j.jmbbm.2016.06.014

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN: 1878-0180


  4 in total

1.  Characterization of the Micro-Abrasive Wear in Coatings of TaC-HfC/Au for Biomedical Implants.

Authors:  Pablo Guzmán; Luis Yate; Mercy Sandoval; Jose Caballero; Willian Aperador
Journal:  Materials (Basel)       Date:  2017-07-25       Impact factor: 3.623

2.  Selected Physicochemical Properties of Diamond Like Carbon (DLC) Coating on Ti-13Nb-13Zr Alloy Used for Blood Contacting Implants.

Authors:  Magdalena Antonowicz; Roksana Kurpanik; Witold Walke; Marcin Basiaga; Jozef Sondor; Zbigniew Paszenda
Journal:  Materials (Basel)       Date:  2020-11-11       Impact factor: 3.623

3.  Triboelectrochemical friction control of W- and Ag-doped DLC coatings in water-glycol with ionic liquids as lubricant additives.

Authors:  Hamid Khanmohammadi; Wahyu Wijanarko; Sandra Cruz; Manuel Evaristo; Nuria Espallargas
Journal:  RSC Adv       Date:  2022-01-27       Impact factor: 3.361

4.  A Comparative Study of Friction and Wear Processes of Model Metallic Biomaterials Including Registration of Friction-Induced Temperature Response of a Tribological Pair.

Authors:  Magdalena Łępicka; Artur Ciszewski; Karol Golak; Małgorzata Grądzka-Dahlke
Journal:  Materials (Basel)       Date:  2019-12-11       Impact factor: 3.623

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.