Literature DB >> 27344232

Patient-specific simulation of endovascular repair surgery with tortuous aneurysms requiring flexible stent-grafts.

David Perrin1, Pierre Badel2, Laurent Orgeas3, Christian Geindreau3, Sabine Rolland du Roscoat3, Jean-Noël Albertini4, Stéphane Avril5.   

Abstract

The rate of post-operative complications is the main drawback of endovascular repair, a technique used to treat abdominal aortic aneurysms. Complex anatomies, featuring short aortic necks and high vessel tortuosity for instance, have been proved likely prone to these complications. In this context, practitioners could benefit, at the preoperative planning stage, from a tool able to predict the post-operative position of the stent-graft, to validate their stent-graft sizing and anticipate potential complications. In consequence, the aim of this work is to prove the ability of a numerical simulation methodology to reproduce accurately the shapes of stent-grafts, with a challenging design, deployed inside tortuous aortic aneurysms. Stent-graft module samples were scanned by X-ray microtomography and subjected to mechanical tests to generate finite-element models. Two EVAR clinical cases were numerically reproduced by simulating stent-graft models deployment inside the tortuous arterial model generated from patient pre-operative scan. In the same manner, an in vitro stent-graft deployment in a rigid polymer phantom, generated by extracting the arterial geometry from the preoperative scan of a patient, was simulated to assess the influence of biomechanical environment unknowns in the in vivo case. Results were validated by comparing stent positions on simulations and post-operative scans. In all cases, simulation predicted stents deployed locations and shapes with an accuracy of a few millimetres. The good results obtained in the in vitro case validated the ability of the methodology to simulate stent-graft deployment in very tortuous arteries and led to think proper modelling of biomechanical environment could reduce the few local discrepancies found in the in vivo case. In conclusion, this study proved that our methodology can achieve accurate simulation of stent-graft deployed shape even in tortuous patient specific aortic aneurysms and may be potentially helpful to help practitioners plan their intervention.
Copyright © 2016 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Abdominal aortic aneurysm; Endovascular repair; Finite-element analysis; Patient-specific; Stent-graft

Mesh:

Year:  2016        PMID: 27344232     DOI: 10.1016/j.jmbbm.2016.06.013

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN: 1878-0180


  5 in total

1.  3D Printed Abdominal Aortic Aneurysm Phantom for Image Guided Surgical Planning with a Patient Specific Fenestrated Endovascular Graft System.

Authors:  Karen M Meess; Richard L Izzo; Maciej L Dryjski; Richard E Curl; Linda M Harris; Michael Springer; Adnan H Siddiqui; Stephen Rudin; Ciprian N Ionita
Journal:  Proc SPIE Int Soc Opt Eng       Date:  2017-03-13

2.  Evaluation of a New Approach for Modeling Full Ring Stent Bundles with the Inclusion of Manufacturing Strains.

Authors:  Faidon Kyriakou; David Bow; William Dempster; Robbie Brodie; David Nash
Journal:  Ann Biomed Eng       Date:  2019-07-17       Impact factor: 3.934

3.  Patient-specific simulation of stent-graft deployment in type B aortic dissection: model development and validation.

Authors:  Xiaoxin Kan; Tao Ma; Jing Lin; Lu Wang; Zhihui Dong; Xiao Yun Xu
Journal:  Biomech Model Mechanobiol       Date:  2021-08-24

4.  Efficiently Simulating an Endograft Deployment: A Methodology for Detailed CFD Analyses.

Authors:  Faidon Kyriakou; Craig Maclean; William Dempster; David Nash
Journal:  Ann Biomed Eng       Date:  2020-05-11       Impact factor: 3.934

5.  Evaluation and Verification of Fast Computational Simulations of Stent-Graft Deployment in Endovascular Aneurysmal Repair.

Authors:  Aymeric Pionteck; Baptiste Pierrat; Sébastien Gorges; Jean-Noël Albertini; Stéphane Avril
Journal:  Front Med Technol       Date:  2021-07-20
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.