Synthesis and reactivity of BINEPINE-based chiral Fe(II) PNP pincer complexes.

ABSTRACT: A new asymmetric chiral PNP ligand based on the 2,6-diaminopyridine scaffold featuring a R-BINEPINE moiety was prepared. Treatment of anhydrous FeX2 (X = Cl, Br) with 1 equiv of PNP-iPr,BIN at room temperature afforded the coordinatively unsaturated paramagnetic complexes [Fe(PNP-iPr,BIN)X2]. The structure of [Fe(PNP-iPr,BIN)Cl2] is described. Both complexes react readily with the strong π-acceptor ligand CO in solution to afford selectively the diamagnetic complexes trans-[Fe(PNP-iPr,BIN)(CO)X2] in quantitative yield. Due the lability of the CO ligand, these complexes are only stable under a CO atmosphere and isolation in pure form was not possible. The preparation of the carbonyl hydride complex [Fe(PNP-iPr,BIN)(H)(CO)Br] was achieved albeit in low yields via a one pot procedure by treatment of [Fe(PNP-iPr,BINEP)Br2] with CO and subsequent reaction with Na[HBEt3]. This complex was obtained as an inseparable mixture of two diastereomers in a ca. 1:1 ratio and was tested as catalyst for the hydrogenation of ketones. The catalyst showed acceptable activity under mild conditions (5 bar H2, room temperature) with yields up to >99 % within 18 h.

Introduction

In view of concerns regarding economy, environment, and sustainable energy, there is a constant need for the discovery of new catalytic reactions. A process we are interested in is the catalytic hydrogenation of polar multiple bonds via molecular hydrogen. This plays a significant role in modern synthetic organic chemistry and is excellently performed by many transition metal hydride complexes containing noble metals such as ruthenium, rhodium, or iridium [1-5]. The limited availability of precious metals, their high price, and their toxicity lowers the attractivity of these metals in the future and more economical and environmentally friendly alternatives have to be found which are in line with green chemistry guidelines. In this respect, the preparation of well-defined iron-based hydride catalysts of comparable or even higher activity is desirable [6-12]. Iron is the most abundant transition metal in the earth crust, and ubiquitously available. Accordingly, it is not surprising that the field of iron catalyzed hydrogenations of polar multiple bonds is rapidly evolving as shown by several recent examples [13-27].

We are currently focusing on the synthesis and reactivity of iron complexes containing PNP pincer ligands based on the 2,6-diaminopyridine scaffold [28-38]. In these ligands the aromatic pyridine ring and the phosphine moieties are connected via NH, N-alkyl, or N-aryl linkers. Complexes of the type [Fe(PNP-iPr)(H)(CO)(L)]n with labile ligands (L = Br−, CH3CN, BH4−) and NH spacers were found to be efficient catalysts for the hydrogenation of both ketones and aldehydes to alcohols under mild conditions (Scheme 1) [35].

Herein we report on the synthesis, characterization, and preliminary catalytic activity of asymmetric chiral iron pincer complexes where PiPr2 and BINEPINE moieties are connected to the pyridine ring of the PNP ligand via NH spacers. The iPr substituents were chosen to prevent the coordination of two PNP ligands as found recently for sterically little demanding PNP systems [34, 36].

Results and discussion

Treatment of the mono-phosphinated ligand PNNH2-iPr (1) with 1 equiv of BIN-PCl (2) (in the R-form) in the presence of NEt3 afforded the new asymmetric chiral PNP ligand PNP-iPr,BIN (3) in 64 % isolated yield (Scheme 2). The optically pure ligand was isolated as air stable solid and was characterized by elemental analysis, 1H, 13C{1H}, and 31P{1H} NMR spectroscopy.

Treatment of anhydrous FeCl2 with 1 equiv of the PNP ligand PNP-iPr,BIN (3) in THF at room temperature afforded the coordinatively unsaturated complex [Fe(PNP-iPr,BIN)Cl2] (4a) in 79 % isolated yields (Scheme 3). The analogous bromide complex [Fe(PNP-iPr,BIN)Br2] (4b) was obtained in similar fashion by straightforward complexation of the respective free PNP ligand with anhydrous ferrous dibromide (84 % yield). All complexes are thermally robust pale yellow solids that are air sensitive in the solid state and particularly in solution. They display large paramagnetic shifted 1H and 13C{1H} NMR solution spectra with broad and featureless signals which, due to the complexity of the PNP ligands, were not assignable and thus not informative. These complexes were characterized by elemental analysis. In addition the molecular structure of 4d was determined by X-ray crystallography. In this case, the racemic BIN-PCl (2) was used, since all attempts to grow crystals suitable for X-ray diffraction studies failed for the chiral compounds. A structural view of 4a is depicted in Fig. 1 with selected bond distances and angles given in the caption. The coordination geometry of the iron center is distorted square pyramidal. Bond distances and angles are in good accord with the solid state structures of similar complexes of the type [Fe(κ3P,N,P-PNP)Cl2] [29]. Particularly characteristic for all these complexes are the comparatively long Fe–N and Fe–P bonds which clearly indicate that they are in high-spin state; low-spin Fe–PNP complexes have Fe–N and Fe–P bonds by ca. 0.2 Å shorter.

Fig. 1

Structural view of [Fe(PNP-iPr,BIN)Cl2] (4a) showing 50 % thermal ellipsoids (most H atoms and solvent molecules omitted for clarity). Selected bond (Å) and bond angles (°): Fe1–Cl1 2.3057(8), Fe1–Cl2 2.3366(9), Fe1–P1 2.4853(9), Fe1–P2 2.5150(9), Fe1–N1 2.141(2), Cl1–Fe1–Cl2 130.99(3), Cl1–Fe1–P1 97.69(3), Cl2–Fe1–P2 92.32(3), P1–Fe1–P2 159.16(3), Cl1–Fe1–P1–N2 130.5(1), Cl2–Fe1–P1–N2 97.0(1)

In order to obtain iron-based hydrogenation catalysts it appears to be important to have diamagnetic complexes. Accordingly, virtually all iron complexes that are active catalysts feature the strong field CO and hydride ligands, which seem to maintain a low spin configuration throughout the catalytic cycle. Complexes 4a and 4b react readily with the strong π-acceptor ligand CO in solution to afford selectively the diamagnetic, octahedral complexes trans-[Fe(PNP-iPr,BIN)(CO)Cl2] (5a) and trans-[Fe(PNP-iPr,BIN)(CO)Br2] (5b), respectively, in quantitative yield (Scheme 3). However, due the lability of the CO ligand, these complexes are stable only under a CO atmosphere and isolation in pure form was not possible. These compounds slowly release CO thereby reforming the starting materials 4a and 4b. Accordingly, complexes 5a and 5b were fully characterized by 1H, 13C{1H}, and 31P{1H} NMR spectroscopy. In the 13C{1H} NMR spectrum the CO ligands of 5a and 5b exhibit a single low-intensity triplet resonance at 220.7 (t, J = 22.2 Hz) and 223.1 ppm (t, J = 21.9 Hz), respectively. The 31P{1H} NMR spectra give rise to two doublets centered at 143.6/125.3 and 143.9/125.1 ppm, respectively, with large J coupling constants of 190 and 177 Hz which are consistent with a trans-P,P configuration.

The preparation of carbonyl hydride complexes was attempted via a one pot procedure by treatment of [Fe(PNP-iPr,BINEP)Br2] (4b) with CO and subsequent reaction with 1.1 equivs of Na[HBEt3] (Scheme 4). Complex [Fe(PNP-iPr,BIN)(H)(CO)Br] (6) was obtained as an inseparable mixture of two diastereomers in a ca. 1:1 ratio. Together with 6, a considerable amount of free PNP-iPr,BIN ligand was detected in the 31P{1H} NMR spectrum, and the yield was low (ca 50 %). In good agreement with the experimental findings, also DFT/B3LYP calculations showed that the energy difference between the two isomers (denoted as 6A and 6B) is merely 10.5 kJ/mol (Fig. 2). In both isomers, the hydride ligands are located trans to the bromide ligand. Complex 6 turned out to be unstable in solution and slow decomposition took place. Accordingly, complete purification and characterization was unsuccessful. The products were identified by 1H NMR where the hydride signals of the two isomers 6A and 6B gave rise to triplet resonances at −22.15 (J = 61.6 Hz) and −22.36 ppm (J = 61.1 Hz), respectively (Fig. 3). The assignments are based on DFT calculations.

Fig. 2

DFT/B3LYP optimized structures and free energy difference of the two diasteromers of [Fe(PNP-iPr,BIN)(H)(CO)Br] (6)

Fig. 3

Hydride region of the 1H NMR spectrum of 6A (left) and 6B (right) in CD3OD

Despite these facts, complex 6 (as mixture of two diastereomers), prepared in situ, was tested as catalyst for the hydrogenation of some ketones. Since the catalyst could not be isolated in pure form, only preliminary tests were performed with five substrates. These results are depicted in Table 1. The catalyst showed acceptable activity under mild conditions (5 bar H2, room temperature) with yields up to >99 % within 18 h indicating that in further experiments the catalyst loadings and possibly reaction times can be reduced significantly.

Table 1

Hydrogenation of ketones catalyzed by [Fe(PNP-iPr,BIN)(H)(CO)Br] (6)

aYields were determined by 1H NMR

b R = naphtyl

In conclusion, we describe here the synthesis of a new asymmetric chiral PNP ligand based on the 2,6-diaminopyridine scaffold featuring an R-BINEPINE moiety. This ligand reacts with anhydrous FeX2 (X = Cl, Br) to afford the coordinatively unsaturated paramagnetic complexes [Fe(PNP-iPr,BIN)X2]. Both complexes react readily with the strong π-acceptor ligand CO in solution to afford selectively and quantitatively trans-[Fe(PNP-iPr,BIN)(CO)X2]. Due the lability of the CO ligand, these complexes are only stable under a CO atmosphere. The preparation of the carbonyl hydride complex [Fe(PNP-iPr,BIN)(H)(CO)Br] was achieved albeit in low yields via a one pot synthesis. This complex was obtained as an inseparable mixture of two diastereomers and was successfully tested as catalyst for the hydrogenation of ketones.

Experimental

All manipulations were performed under an inert atmosphere of argon by using Schlenk techniques or in an MBraun inert-gas glovebox. The solvents were purified according to standard procedures [39]. The deuterated solvents were purchased from Aldrich and dried over 4 Å molecular sieves. The ligands N2-(diisopropylphosphanyl)pyridine-2,6-diamine (PNNH2-iPr) (1) and (1R)-4-chloro-4,5-dihydro-3H-dinaphto[2,1-c:1′,2′-e]phosphepine (BIN-PCl) (2) were prepared according to the literature [37, 40]. 1H, 13C{1H}, and 31P{1H} NMR spectra were recorded on Bruker AVANCE-250, AVANCE-300 DPX, and AVANCE-400 spectrometers. 1H and 13C{1H} NMR spectra were referenced internally to residual protio-solvent, and solvent resonances, respectively, and are reported relative to tetramethylsilane (δ = 0 ppm). 31P{1H} NMR spectra were referenced externally to H3PO4 (85 %) (δ = 0 ppm).

(1R)-N-(3,5-Dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine (PNP-iPr,BIN) (3, C33H35N3P2)

1 (1.00 eq, 6.55 mmol, 1.47 g) was dissolved in 100 cm3 toluene and 1.4 cm3 Et3N (1.50 eq, 9.83 mmol) was added. After cooling to 0 °C, 2.50 g 2 (1.10 eq, 7.21 mmol) in 50 cm3 toluene was added and the reaction was stirred at 80 °C for 12 h. The suspension was filtered over a small pad of Celite® and the solvent was removed under reduced pressure. The crude product was purified via flash chromatography using silica gel (conditioned with 5 vol % NEt3) and 1:1 MC/EE as eluent. Yield: 2.25 g (64 %). 1H NMR (CDCl3, 20 °C): δ = 7.89–7.79 (m, 4H, naph), 7.47 (d, J = 8.3 Hz, 1H, naph), 7.38–7.32 (m, 2H, naph), 7.31 (d, J = 8.3 Hz, 1H, naph), 7.23 (m, 5H, py4, naph), 6.43 (dd, J = 8.0 Hz, J = 1.9 Hz, 1H, py5), 6.22 (d, J = 8.4 Hz, 1H, py3), 4.31 (d, J = 10.9 Hz, 1H, NHBIN), 4.08 (d, J = 10.7 Hz, 1H, NH), 3.03 (dd, J = 17.0 Hz, J = 11.9 Hz, 1H, CH), 2.70 (dd, J = 14.3 Hz, J = 2.8 Hz, 1H, CH), 2.50 (dd, J = 18.2 Hz, J = 14.3 Hz, 1H, CH), 2.29 (d, J = 11.9 Hz, 1H, CH), 1.68 (m, 2H, CH(CH3)2), 1.04–0.95 (m, 12H, CH(CH)2) ppm; 13C{1H} NMR (CDCl3, 20 °C): δ = 159.92 (d, J = 20.0 Hz, py6), 157.01 (d, J = 17.4, py2), 139.25 (s, py4), 133.79 (d, J = 4.1 Hz, naph), 133.43 (s, naph), 133.08 (s, naph), 132.82 (d, J = 1.5 Hz, naph), 132.72 (s, naph), 132.38 (s, naph), 132.28 (d, J = 1.8 Hz, naph), 132.15 (s, naph), 128.24 (s, naph), 127.58 (s, naph), 127.23 (d, J = 2.1 Hz, naph), 126.69 (d, J = 10.8 Hz, naph), 126.06 (d, J = 11.5 Hz, naph), 125.09 (d, J = 11.9 Hz, naph), 98.90 (d, J = 18.4 Hz, py5), 98.73 (d, J = 15.7, py3), 36.04 (d, J = 15.0 Hz, CH2), 34.90 (d, J = 24.2 Hz, CH2), 26.43 (d, J = 11.5 Hz, CH(CH3)2), 16.34 (d, J = 11.0 Hz, CH(CH3)2), 18.72 (d, J = 19.8 Hz, CH(CH3)2), 17.22 (d, J = 10.6 Hz, CH(CH3)2), 17.14 (d, J = 10.4 Hz, CH(CH3)2) ppm; 31P{1H} NMR (CDCl3, 20 °C): δ = 48.6 (s, iPr), 48.1 (s, BIN) ppm.

[(Dichloro)(1R)-N-(3,5-dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine)iron(II)] ([Fe(PNP-iPr,BIN)Cl]) (4a, C33H35Cl2FeN3P2)

A suspension of 71 mg anhydrous FeCl2 (0.56 mmol) and 300 mg 3 (0.56 mmol) was stirred in 15 cm3 of THF at room temperature for 12 h. The solvent was then removed under vacuum and the remaining solid dissolved in 15 cm3 of CH2Cl2. Insoluble materials were removed by filtration. The volume of the solution was reduced to 0.5 cm3 and the product was precipitated by addition of 40 cm3 of n-pentane. After filtration the yellow product was washed with twice with 15 cm3 of n-pentane and dried under vacuum. Yield: 324 mg (87 %) yellow solid.

[(Dibromo)(1R)-N-(3,5-dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine)iron(II)] ([Fe(PNP-iPr,BIN)Br]) (4b, C33H35Br2FeN3P2)

This complex was prepared analogously to 4a with 121 mg anhydrous FeBr2 (0.56 mmol) and 300 mg 3 (0.56 mmol) as starting materials. Yield: 352 mg (84 %), yellow solid.

Reaction of [Fe(PNP-iPr,BIN)Cl] () with CO in CDCl. Formation of trans-[(dichloro)(carbonyl)(1R)-N-(3,5-dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine)iron(II)] (trans-[Fe(PNP-iPr,BIN)(CO)Cl]) (5a, C34H35Cl2FeN3OP2)

CO was bubbled through a solution of 30 mg 4a (45.3 µmol) in 0.6 cm3 of CD2Cl2 for 2 min, whereupon the colour changed to dark violet. 1H NMR (CD2Cl2, 20 °C): δ = 8.13–8.00 (m, 4H, naph), 7.79 (d, J = 7.9 Hz, 1H, naph), 7.66 (d, J = 7.5 Hz, 1H, naph), 7.41 (d, J = 8.4 Hz, 1H, naph), 7.34–7.15 (m, 6H, naph, py4), 6.62 (bs, 1H, py5), 6.41 (bs, 1H, NHiPr), 6.03 (bs, 1H, py3), 5.56 (bs, 1H, NHBIN), 4.35 (dd, J = 12.3 Hz, J = 4.1 Hz, 1H, CH), 3.76 (dd, J = 15.1 Hz, J = 9.1 Hz, 1H, CH), 3.20 (d, J = 15.0 Hz, 1H, CH), 2.99 (m, 2H, CH(CH3)2), 2.71 (dd, J = 17.0 Hz, J = 13.0 Hz, 1H, CH), 1.62–1.37 (m, 12H, CH(CH)2) ppm; 13C{1H} NMR (CD2Cl2, 20 °C): δ = 220.73 (t, J = 22.2 Hz, CO), 161.90 (dd, J = 13.2 Hz, J = 5.6 Hz, py6), 160.63 (dd, J = 13.6 Hz, J = 5.1 Hz, py2), 140.16 (s, py4), 134.67 (d, J = 1.8 Hz, naph), 134.16 (d, J = 4.9 Hz, naph), 133.21 (d, J = 2.6 Hz, naph), 132.91 (d, J = 1.6 Hz, naph), 132.82 (s, naph), 132.49 (s, naph), 132.24 (d, J = 2.5 Hz, naph), 131.56 (d, J = 3.0 Hz, naph), 129.03 (s, naph), 128.81 (d, J = 2.1 Hz, naph), 128.45 (d, J = 3.6 Hz, naph), 128.37 (d, J = 8.0 Hz, naph), 127.53 (s, naph), 126.96 (s, naph), 126.79 (s, naph), 126.40 (s, naph), 126.08 (s, naph), 125.65 (s, naph), 125.51 (s, naph), 99.88 (d, J = 7.7 Hz, py5), 99.52 (d, J = 7.2 Hz, py3), 33.05 (d, J = 21.9 Hz, CH2), 29.10 (d, J = 26.3 Hz, CH2), 26.23 (d, J = 21.9 Hz, CH(CH3)2), 25.95 (d, J = 22.2 Hz, CH(CH3)2), 18.88 (d, J = 4.1 Hz, CH(CH3)2), 18.86 (d, J = 4.0 Hz, CH(CH3)2), 17.95 (d, J = 3.5 Hz, CH(CH3)2) ppm; 31P{1H} NMR (CD2Cl2, 20 °C): δ = 143.6 (d, J = 189.7 Hz, BIN), 125.3 (d, J = 189.7 Hz, iPr) ppm.

Reaction of [Fe(PNP-iPr,BIN)Br] () with CO in CDCl. Formation of trans-[(dibromo)(carbonyl)(1R)-N-(3,5-dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine)iron(II)] (trans-[Fe(PNP-iPr,BIN)(CO)Br]) (5b, C34H35Br2FeN3OP2)

CO was bubbled through a solution of 30 mg 4b (39.9 µmol) in 0.6 cm3 of CD2Cl2 for 2 min, whereupon the colour changed to dark violet. 1H NMR (CD2Cl2, 20 °C): δ = 8.01–7.90 (m, 4H, naph), 7.80 (d, J = 7.9 Hz, 1H, naph), 7.54 (d, J = 7.5 Hz, 1H, naph), 7.41–7.36 (m, 3H, naph), 7.30 (d, J = 8.4 Hz, 1H, naph), 7.25–7.03 (m, 3H, naph, py4), 6.50 (bs, 1H, py5), 6.32 (d, J = 5.9 Hz, 1H, NHiPr), 5.83 (bs, 1H, py3), 5.50 (d, J = 6.0 Hz, 1H, NHBIN), 4.67 (dd, J = 12.5 Hz, J = 3.9 Hz, 1H, CH), 3.94 (dd, J = 15.1 Hz, J = 8.8 Hz, 1H, CH), 3.10 (m, 3H, CH, CH(CH3)2), 2.73 (dd, J = 17.3 Hz, J = 13.3 Hz, 1H, CH), 1.49 (dd, J = 5.8 Hz, J = 12.1 Hz, 3H, CH(CH)2), 1.45 (dd, J = 6.8 Hz, J = 15.3 Hz, 3H, CH(CH)2), 1.41 (dd, J = 7.2 Hz, J = 16.9 Hz, 3H, CH(CH)2), 1.32 (dd, J = 7.2 Hz, J = 16.6 Hz, 3H, CH(CH)2) ppm; 13C{1H} NMR (CD2Cl2, 20 °C): δ = 223.05 (t, J = 21.9 Hz, CO), 161.97 (dd, J = 12.6 Hz, J = 5.3 Hz, py6), 160.60 (dd, J = 13.3 Hz, J = 5.1 Hz, py2), 140.11 (s, py4), 134.65 (s, naph), 134.12 (d, J = 5.0 Hz, naph), 133.67 (d, J = 10.9 Hz, naph), 133.18 (d, J = 2.6 Hz, naph), 132.92 (d, J = 1.3 Hz, naph), 132.44 (s, naph), 132.18 (d, J = 2.4 Hz, naph), 131.61 (d, J = 2.9 Hz, naph), 129.08 (s, naph), 128.80 (d, J = 2.2 Hz, naph), 128.39 (d, J = 6.2 Hz, naph), 128.22 (d, J = 3.5 Hz, naph), 127.63 (d, J = 1.6 Hz, naph), 126.92 (d, J = 13.8 Hz, naph), 126.41 (s, naph), 126.10 (s, naph), 125.61 (d, J = 13.5 Hz, naph), 100.17 (d, J = 7.0 Hz, py5), 99.67 (d, J = 7.2 Hz, py3), 36.23 (d, J = 23.3 Hz, CH2), 31.39 (d, J = 27.9 Hz, CH2), 28.48 (d, J = 22.6 Hz, CH(CH3)2), 28.01 (d, J = 23.3 Hz, CH(CH3)2), 18.97 (d, J = 4.5 Hz, CH(CH3)2), 18.52 (m, CH(CH3)2) ppm; 31P{1H} NMR (CD2Cl2, 20 °C): δ = 143.9 (d, J = 176.6 Hz, BIN), 125.1 (d, J = 176.5 Hz, iPr) ppm.

Reaction of [Fe(PNP-iPr,BIN)Br] () with CO and Na[HBEt]. Formation of [(bromo)(hydrido)(carbonyl)(1R)-N-(3,5-dihydro-4H-dinaphtho[2,1-c:1′,2′-e]phosphepin-4-yl)-N-(diisopropylphosphanyl)pyridine-2,6-diamine)iron(II)] ([Fe(PNP-iPr,BIN)(H)(CO)Br]) (6, C34H36BrFeN3OP2)

A solution of 300 mg 4b (0.40 mmol) in 15 cm3 THF was purged with CO for 3 min, whereupon the colour changed to deep blue. The reaction mixture was then cooled to 0 °C and 0.44 cm3 Na[HBEt3] (0.44 mmol) was added slowly via syringe. The solvent was then removed under reduced pressure. The residue was redissolved in 15 cm3 of CH2Cl2, filtered and the volume of the solution was reduced to ca 0.5 cm3. The product was precipitated upon addition of 40 cm3 of n-pentane, collected on a glass frit, washed with 10 cm3n-pentane and dried under vacuum for 2 h. The product could not be isolated in pure form and was used for catalytic reactions as obtained.

X-ray structure determination

X-ray diffraction data of 4a·xTHF·(2 − x)Et2O (CCDC number 1445976) were collected at T = 100 K in a dry stream of nitrogen on a Bruker Kappa APEX II diffractometer system using graphite-monochromatized MoKα radiation (λ = 0.71073 Å) and fine sliced φ- and ω-scans. Data were reduced to intensity values with SAINT and an absorption correction was applied with the multi-scan approach implemented in SADABS [41]. The structures were solved by charge flipping using SUPERFLIP [42] and refined against F with JANA2006 [43]. The electron density in distinct voids of the structure could be attributed to two solvent positions. On one was located an Et2O molecule and the other was substitutionally disordered by Et2O and THF molecules. Since no refinement with reasonable ADPs of the solvent molecules could be obtained, contributions of the solvent molecules to the diffraction data were removed using the SQUEEZE procedure of PLATON [44]. The non-hydrogen atoms were refined anisotropically. The H atoms connected to C atoms were placed in calculated positions and thereafter refined as riding on the parent atoms. H atoms connected to N located in difference Fourier maps. Since the point group 4/m of the crystal is a merohedry twinning via twofold rotation about [110] was included in the model. Such models did not result in improved residuals and twinning was ultimately dropped from the refinement. Molecular graphics were generated with the program MERCURY [45]. Crystal data are given in Table S1.

Computational details

Calculations were performed using the Gaussian 09 software package [46], and the B3LYP functional [47-49] without symmetry constraints. This functional was shown to perform well in mechanistic studies of spin forbidden reactions in closely related Fe system. The optimized geometries were obtained with the Stuttgart/Dresden ECP (SDD) basis set [50-52] to describe the electrons of the iron atom. For all other atoms a standard 6-31G** basis set was employed [53-58]. Frequency calculations were performed to confirm the nature of the stationary points yielding no imaginary frequency for the minima.

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 48 kb)

Supplementary material 2 (CIF 553 kb)