Optimum cycle frequencies in hand-rim wheelchair propulsion. Wheelchair propulsion technique.

To study the effect of different cycle frequencies on cardio-respiratory responses and propulsion technique in hand-rim wheelchair propulsion, experienced wheelchair sportsmen (WS group; n = 6) and non-wheelchair users (NW group; n = 6) performed wheelchair exercise tests on a motor-driven treadmill. The WS group wheeled at velocities of 0.55, 0.83, 1.11 and 1.39 m.s-1 and a slope of 2 degrees. The NW group wheeled at 0.83, 1.11 and 1.39 m.s-1 and a 1 degree slope. In each test, a 3-min period at a freely chosen cycle frequency (FCF: 100%) was followed by four 3-min blocks of paced cycle frequencies at 60%, 80%, 120% and 140% FCF. Effects of both cycle frequency and velocity on physiological and propulsion technique parameters were studied. Analysis of variance showed a significant effect (p less than 0.05) of cycle frequency on oxygen cost and gross mechanical efficiency in both the WS and NW group. This indicated the existence of an optimum cycle frequency which is close to the FCF at any given velocity. The optimum cycle frequency increased with velocity from 0.67 to 1.03 cps over the range studied (p less than 0.05). Oxygen cost was approximately 10% less at 100% FCF than at 60% or 140% FCF. Gross mechanical efficiency for the WS group at 100% FCF was 8.5%, 9.7%, 10.4% and 10.1%, respectively, at the four velocities.(ABSTRACT TRUNCATED AT 250 WORDS)