Zijia Chen1, Hongliang Qi1, Shuyu Wu1, Yuan Xu2, Linghong Zhou3. 1. Department of Biomedical Engineering, Southern Medical University, 510515 Guangzhou, China. 2. Department of Biomedical Engineering, Southern Medical University, 510515 Guangzhou, China. Electronic address: yuanxu@smu.edu.cn. 3. Department of Biomedical Engineering, Southern Medical University, 510515 Guangzhou, China. Electronic address: smart@smu.edu.cn.
Abstract
PURPOSE: Non-local means (NLM) based reconstruction method is a promising algorithm for few-view computed tomography (CT) reconstruction, but often suffers from over-smoothed image edges. To address this problem, an adaptive NLM reconstruction method based on rotational invariance (ART-RIANLM) is proposed. METHODS: The method consists of four steps: 1) Initializing parameters; 2) ART reconstruction using raw data; 3) Positivity constraint of the reconstructed image; 4) Image updating by RIANLM filtering. In RIANLM, two kinds of rotational invariance measures which are average gradient (AG) and region homogeneity (RH) are proposed to calculate the distance between two patches and a novel NLM filter is developed to avoid over-smoothed image. Moreover, the parameter h in RIANLM which controls the decay of the weights is adaptive to avoid over-smoothness, while it is constant in NLM during the whole reconstruction process. The proposed method is validated on two digital phantoms and real projection data. RESULTS: In our experiments, the searching neighborhood size is set as 15×15 and the similarity window is set as 3×3. For the simulated case of Shepp-Logan phantom, ART-RIANLM produces higher SNR (36.23dB>24.00dB) and lower MAE (0.0006<0.0024) reconstructed images than ART-NLM. The visual inspection demonstrated that the proposed method could suppress artifacts or noises more effectively and recover image edges better. The result of real data case is also consistent with the simulation result. CONCLUSIONS: A RIANLM based reconstruction method for few-view CT is presented. Compared to the traditional ART-NLM method, SNR and MAE from ART-RIANLM increases 51% and decreases 75%, respectively.
PURPOSE: Non-local means (NLM) based reconstruction method is a promising algorithm for few-view computed tomography (CT) reconstruction, but often suffers from over-smoothed image edges. To address this problem, an adaptive NLM reconstruction method based on rotational invariance (ART-RIANLM) is proposed. METHODS: The method consists of four steps: 1) Initializing parameters; 2) ART reconstruction using raw data; 3) Positivity constraint of the reconstructed image; 4) Image updating by RIANLM filtering. In RIANLM, two kinds of rotational invariance measures which are average gradient (AG) and region homogeneity (RH) are proposed to calculate the distance between two patches and a novel NLM filter is developed to avoid over-smoothed image. Moreover, the parameter h in RIANLM which controls the decay of the weights is adaptive to avoid over-smoothness, while it is constant in NLM during the whole reconstruction process. The proposed method is validated on two digital phantoms and real projection data. RESULTS: In our experiments, the searching neighborhood size is set as 15×15 and the similarity window is set as 3×3. For the simulated case of Shepp-Logan phantom, ART-RIANLM produces higher SNR (36.23dB>24.00dB) and lower MAE (0.0006<0.0024) reconstructed images than ART-NLM. The visual inspection demonstrated that the proposed method could suppress artifacts or noises more effectively and recover image edges better. The result of real data case is also consistent with the simulation result. CONCLUSIONS: A RIANLM based reconstruction method for few-view CT is presented. Compared to the traditional ART-NLM method, SNR and MAE from ART-RIANLM increases 51% and decreases 75%, respectively.