Total and extractable contents of trace metals in agricultural soils of the Valderas area, Spain.

The surface horizons of four agricultural field soils (Mollic ustifluvents, Alfic Xerochrepts, Typic Palexeralfs, Typic Haploxeralfs) were sampled to determine the total copper, cobalt, molybdenum, zinc, chromium, nickel, selenium, cadmium, lead, mercury, lithium and strontium, and were also fractionated by an extraction procedure to estimate the quantities of these trace metals in soluble form. The extractants used were the following: 1.0 N NH4 OAc for lithium and strontium, 0.05 M Na2-EDTA for cadmium, copper, nickel and zinc, 2.5% (w/v) acetic acid for lead, 2.5% (w/v) acetic acid and 2% (w/v) dithizone for cobalt, 2% (w/v) diethyldithiocarbamate solution for selenium, 0.1 NHCl for chromium, and 0.5 NHCl for mercury. The total content of these twelve elements in the four field soils sampled were lower than the levels quoted in the literature, although for different geochemical systems. The percentage of the total element content in soluble form was (except for selenium) generally very low, averaging between 5.5 and 8% for copper, 1.6 and 2.5% for cobalt, 8 and 10% for molybdenum, 1.8 and 2.2% for zinc, 14.2 and 17.7% for chromium, 5.5 and 6.4% for nickel, 30 and 55% for selenium, 8 and 14% for cadmium, 3 and 3.6% for lead, 8.3 and 11% for mercury, 5 and 7% for lithium, and 4.4 and 5.7% for strontium, regardless of the soil type.