Literature DB >> 27209338

Adsorption behavior of lead on aquatic sediments contaminated with cerium dioxide nanoparticles.

Chao Wang1, Xiulei Fan1, Peifang Wang2, Jun Hou1, Yanhui Ao1, Lingzhan Miao1.   

Abstract

Aquatic sediments serve as an important sink for engineered nanomaterials (ENMs), such as metal oxide nanoparticles (MeO NPs) and carbon nanotubes (CNTs). Owing to their remarkable properties, ENMs demonstrate significant potential to disturb the adsorption behavior of other contaminants in aquatic sediments, thereby altering the bioavailability and toxicity of these contaminants. Thus far, most studies have investigated the effect of CNTs on the adsorption of other contaminants on sediments. Cerium dioxide nanoparticles (CeO2 NPs), as one of the important MeO NPs, are also inevitably discharged into aquatic sediments because of their widespread use. In this study, we investigated the adsorption behavior of Pb2+ on sediments spiked with CeO2 NPs at a weight ratio of 5.0%. The results showed that the adsorption rates at three stages occurring during adsorption clearly increase for sediments contaminated with CeO2 NPs. Moreover, the results obtained from the adsorption isotherms indicated that the Langmuir isotherm model best fits the isotherm data for both sediments and those contaminated with CeO2 NPs. After spiking the sediments with CeO2 NPs, the theoretical maximum monolayer adsorption capacity (Qmax) for Pb2+ increased from 4.433 to 4.995 mg/g and the Langmuir isotherm coefficient (KL) decreased from 8.813 to 7.730 L/g. The effects of CeO2 NPs on the surface charge and pore surface properties of sediments were also studied as these properties affect the adsorption of several chemicals in sediments. The results showed that pHzpc, SBET, Sext, and average pore size of sediments clearly decrease for sediments contaminated with CeO2 NPs. Hence, the strong adsorption capacity of CeO2 NPs and the changes of sediment surface charge and pore surface properties caused by CeO2 NPs are important factors affecting the adsorption behavior of Pb2+. The potential risk of Pb2+ in aquatic environment may increase with CeO2 NPs buried in sediments.
Copyright © 2016 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Cerium dioxide nanoparticles; Pb(2+) adsorption; Pore surface property; Sediment; Surface charge

Mesh:

Substances:

Year:  2016        PMID: 27209338     DOI: 10.1016/j.envpol.2016.05.025

Source DB:  PubMed          Journal:  Environ Pollut        ISSN: 0269-7491            Impact factor:   8.071


  3 in total

1.  Unraveling adsorption behavior and mechanism of perfluorooctane sulfonate (PFOS) on aging aquatic sediments contaminated with engineered nano-TiO2.

Authors:  Jin Qian; Kun Li; Peifang Wang; Chao Wang; Jingjing Liu; Xin Tian; Bianhe Lu; Wenyi Guan
Journal:  Environ Sci Pollut Res Int       Date:  2018-04-20       Impact factor: 4.223

2.  Effects of humic acid on Pb2+ adsorption onto polystyrene microplastics from spectroscopic analysis and site energy distribution analysis.

Authors:  Xiaotian Lu; Feng Zeng; Shuyin Wei; Rui Gao; Abliz Abdurahman; Hao Wang; Weiqian Liang
Journal:  Sci Rep       Date:  2022-05-27       Impact factor: 4.996

3.  Synthesis of FeO@SiO2-DNA core-shell engineered nanostructures for rapid adsorption of heavy metals in aqueous solutions.

Authors:  David Patiño-Ruiz; Lars Rehmann; Mehrab Mehrvar; Edgar Quiñones-Bolaños; Adriana Herrera
Journal:  RSC Adv       Date:  2020-10-27       Impact factor: 4.036

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.