Literature DB >> 27207385

In-vivo heterogeneous functional and residual strains in human aortic valve leaflets.

Ankush Aggarwal1, Alison M Pouch2, Eric Lai2, John Lesicko3, Paul A Yushkevich4, Joseph H Gorman Iii2, Robert C Gorman2, Michael S Sacks5.   

Abstract

Residual and physiological functional strains in soft tissues are known to play an important role in modulating organ stress distributions. Yet, no known comprehensive information on residual strains exist, or non-invasive techniques to quantify in-vivo deformations for the aortic valve (AV) leaflets. Herein we present a completely non-invasive approach for determining heterogeneous strains - both functional and residual - in semilunar valves and apply it to normal human AV leaflets. Transesophageal 3D echocardiographic (3DE) images of the AV were acquired from open-heart transplant patients, with each AV leaflet excised after heart explant and then imaged in a flattened configuration ex-vivo. Using an established spline parameterization of both 3DE segmentations and digitized ex-vivo images (Aggarwal et al., 2014), surface strains were calculated for deformation between the ex-vivo and three in-vivo configurations: fully open, just-coapted, and fully-loaded. Results indicated that leaflet area increased by an average of 20% from the ex-vivo to in-vivo open states, with a highly heterogeneous strain field. The increase in area from open to just-coapted state was the highest at an average of 25%, while that from just-coapted to fully-loaded remained almost unaltered. Going from the ex-vivo to in-vivo mid-systole configurations, the leaflet area near the basal attachment shrank slightly, whereas the free edge expanded by ~10%. This was accompanied by a 10° -20° shear along the circumferential-radial direction. Moreover, the principal stretches aligned approximately with the circumferential and radial directions for all cases, with the highest stretch being along the radial direction. Collectively, these results indicated that even though the AV did not support any measurable pressure gradient in the just-coapted state, the leaflets were significantly pre-strained with respect to the excised state. Furthermore, the collagen fibers of the leaflet were almost fully recruited in the just-coapted state, making the leaflet very stiff with marginal deformation under full pressure. Lastly, the deformation was always higher in the radial direction and lower along the circumferential one, the latter direction made stiffer by the preferential alignment of collagen fibers. These results provide significant insight into the distribution of residual strains and the in-vivo strains encountered during valve opening and closing in AV leaflets, and will form an important component of the tool that can evaluate valve׳s functional properties in a non-invasive manner.
Copyright © 2016 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Aortic valve; Heart valves; In-vivo analysis; Residual strains; Valve mechanics

Mesh:

Year:  2016        PMID: 27207385      PMCID: PMC5028253          DOI: 10.1016/j.jbiomech.2016.04.038

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  29 in total

1.  4D-transesophageal echocardiography and emerging imaging modalities for guiding mitral valve repair.

Authors:  Alison M Pouch; Benjamin M Jackson; Paul A Yushkevich; Joseph H Gorman; Robert C Gorman
Journal:  Ann Cardiothorac Surg       Date:  2015-09

2.  Continuous medial representation for anatomical structures.

Authors:  Paul A Yushkevich; Hui Zhang; James C Gee
Journal:  IEEE Trans Med Imaging       Date:  2006-12       Impact factor: 10.048

3.  Micromechanics of the fibrosa and the ventricularis in aortic valve leaflets.

Authors:  I Vesely; R Noseworthy
Journal:  J Biomech       Date:  1992-01       Impact factor: 2.712

4.  A small angle light scattering device for planar connective tissue microstructural analysis.

Authors:  M S Sacks; D B Smith; E D Hiester
Journal:  Ann Biomed Eng       Date:  1997 Jul-Aug       Impact factor: 3.934

5.  On residual stresses in arteries.

Authors:  C J Chuong; Y C Fung
Journal:  J Biomech Eng       Date:  1986-05       Impact factor: 2.097

6.  Medially constrained deformable modeling for segmentation of branching medial structures: Application to aortic valve segmentation and morphometry.

Authors:  Alison M Pouch; Sijie Tian; Manabu Takebe; Jiefu Yuan; Robert Gorman; Albert T Cheung; Hongzhi Wang; Benjamin M Jackson; Joseph H Gorman; Robert C Gorman; Paul A Yushkevich
Journal:  Med Image Anal       Date:  2015-09-28       Impact factor: 8.545

7.  Regional analysis of dynamic deformation characteristics of native aortic valve leaflets.

Authors:  Michael Weiler; Choon Hwai Yap; Kartik Balachandran; Muralidhar Padala; Ajit P Yoganathan
Journal:  J Biomech       Date:  2011-04-01       Impact factor: 2.712

8.  On the in vivo deformation of the mitral valve anterior leaflet: effects of annular geometry and referential configuration.

Authors:  Rouzbeh Amini; Chad E Eckert; Kevin Koomalsingh; Jeremy McGarvey; Masahito Minakawa; Joseph H Gorman; Robert C Gorman; Michael S Sacks
Journal:  Ann Biomed Eng       Date:  2012-02-11       Impact factor: 3.934

9.  Segmentation of the Aortic Valve Apparatus in 3D Echocardiographic Images: Deformable Modeling of a Branching Medial Structure.

Authors:  Alison M Pouch; Sijie Tian; Manabu Takabe; Hongzhi Wang; Jiefu Yuan; Albert T Cheung; Benjamin M Jackson; Joseph H Gorman; Robert C Gorman; Paul A Yushkevich
Journal:  Stat Atlases Comput Models Heart       Date:  2015-01-01

Review 10.  On the biomechanics of heart valve function.

Authors:  Michael S Sacks; W David Merryman; David E Schmidt
Journal:  J Biomech       Date:  2009-06-21       Impact factor: 2.712

View more
  10 in total

1.  A functionally graded material model for the transmural stress distribution of the aortic valve leaflet.

Authors:  Bruno V Rego; Michael S Sacks
Journal:  J Biomech       Date:  2017-02-08       Impact factor: 2.712

2.  Evaluation of Pericardial Tissues from Assorted Species as a Tissue-Engineered Heart Valve Material.

Authors:  Christopher Noble; David Morse; Amir Lerman; Melissa Young
Journal:  Med Biol Eng Comput       Date:  2022-01-04       Impact factor: 2.602

3.  Controlled Comparison of Simulated Hemodynamics Across Tricuspid and Bicuspid Aortic Valves.

Authors:  Alexander D Kaiser; Rohan Shad; Nicole Schiavone; William Hiesinger; Alison L Marsden
Journal:  Ann Biomed Eng       Date:  2022-06-24       Impact factor: 4.219

4.  Patient-Specific Quantification of Normal and Bicuspid Aortic Valve Leaflet Deformations from Clinically Derived Images.

Authors:  Bruno V Rego; Alison M Pouch; Joseph H Gorman; Robert C Gorman; Michael S Sacks
Journal:  Ann Biomed Eng       Date:  2022-01-07       Impact factor: 4.219

Review 5.  Mechanical considerations for polymeric heart valve development: Biomechanics, materials, design and manufacturing.

Authors:  Richard L Li; Jonathan Russ; Costas Paschalides; Giovanni Ferrari; Haim Waisman; Jeffrey W Kysar; David Kalfa
Journal:  Biomaterials       Date:  2019-09-17       Impact factor: 12.479

6.  Mechanical and finite element evaluation of a bioprinted scaffold following recellularization in a rat subcutaneous model.

Authors:  Christopher Noble; Eva L Maxson; Amir Lerman; Melissa D Young
Journal:  J Mech Behav Biomed Mater       Date:  2019-11-09

7.  A pilot in silico modeling-based study of the pathological effects on the biomechanical function of tricuspid valves.

Authors:  Devin W Laurence; Emily L Johnson; Ming-Chen Hsu; Ryan Baumwart; Arshid Mir; Harold M Burkhart; Gerhard A Holzapfel; Yi Wu; Chung-Hao Lee
Journal:  Int J Numer Method Biomed Eng       Date:  2020-05-08       Impact factor: 2.747

8.  Parameterization, geometric modeling, and isogeometric analysis of tricuspid valves.

Authors:  Emily L Johnson; Devin W Laurence; Fei Xu; Caroline E Crisp; Arshid Mir; Harold M Burkhart; Chung-Hao Lee; Ming-Chen Hsu
Journal:  Comput Methods Appl Mech Eng       Date:  2021-06-17       Impact factor: 6.588

9.  Growth and remodeling play opposing roles during postnatal human heart valve development.

Authors:  Pim J A Oomen; Maria A Holland; Carlijn V C Bouten; Ellen Kuhl; Sandra Loerakker
Journal:  Sci Rep       Date:  2018-01-19       Impact factor: 4.379

10.  A Proof of Concept Study of Using Machine-Learning in Artificial Aortic Valve Design: From Leaflet Design to Stress Analysis.

Authors:  Liang Liang; Bill Sun
Journal:  Bioengineering (Basel)       Date:  2019-11-08
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.