Cell interaction with modified nanotubes formed on titanium alloy Ti-6Al-4V.

Nanotubes with diameters ranging from 40 to 60nm were prepared by electrochemical oxidation of the Ti-6Al-4V alloy in electrolyte containing ammonium sulphate and ammonium fluoride. The nanotubes were further modified with calcium and phosphate ions or were heat treated. Polished Ti-6Al-4V alloy served as a reference sample. The spreading of human osteoblast-like cells was similar on all nanotube samples but lower than on polished samples. The number of initially adhered cells was higher on non-modified nanotubes, but the final cell number was the highest on Ca-enriched nanotubes and the lowest on heat-treated nanotubes. However, these differences were relatively small and less pronounced than the differences in the concentration of specific molecular markers of cell adhesion and differentiation, estimated by their intensity of immunofluorescence staining. The concentration of vinculin, i.e. a protein of focal adhesion plaques, was the lowest on nanotubes modified with calcium. Collagen I, an early marker of osteogenic cell differentiation, was also the lowest on samples modified with calcium and was highest on polished samples. Alkaline phosphatase, a middle marker of osteogenic differentiation, was observed in lowest concentration on nanotubes modified with phosphorus and the highest on heat-treated samples. Osteocalcin concentrations, a late marker of osteogenic cell differentiation, were similar on all tested samples, although they tended to be the highest on heat-treated samples. Thus, osteogenic differentiation can be modulated by various additional treatments of nanotube coatings on Ti-6Al-4V implants.