Literature DB >> 27130088

Simultaneous determination of cadmium, iron and tin in canned foods using high-resolution continuum source graphite furnace atomic absorption spectrometry.

Danilo J Leao1, Mario M S Junior1, Geovani C Brandao1, Sergio L C Ferreira2.   

Abstract

A method was established to simultaneously determine cadmium, iron and tin in canned-food samples using high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GF AAS). The quantification step has been performed using the primary line (228.802nm) for cadmium and the adjacent secondary lines (228.725nm and 228.668nm) for iron and tin, respectively. The selected chemical modifier was an acid solution that contained a mixture of 0.1% (w/v) Pd and 0.05% (w/v) Mg. The absorbance signals were measured based on the peak area using 3 pixels for cadmium and 5 pixels for iron and tin. Under these conditions, cadmium, iron and tin have been determined in canned-food samples using the external calibration technique based on aqueous standards, where the limits of quantification were 2.10ngg(-1) for cadmium, 1.95mgkg(-1) for iron and 3.00mgkg(-1) for tin, and the characteristic masses were 1.0pg for cadmium, 0.9ng for iron and 1.1ng for tin. The precision was evaluated using two solutions of each metal ion, and the results, which were expressed as the relative standard deviation (RSD%), were 3.4-6.8%. The method accuracy for cadmium and iron was confirmed by analyzing a certified reference material of apple leaves (NIST 1515), which was supplied by NIST. However, for tin, the accuracy was confirmed by comparing the results of the proposed method and another analytical technique (inductively coupled plasma optical emission spectrometry). The proposed procedure was applied to determine cadmium, iron and tin in canned samples of peeled tomato and sardine. Eleven samples were analyzed, and the analyte concentrations were 3.57-62.9ngg(-1), 2.68-31.48mgkg(-1) and 4.06-122.0mgkg(-1) for cadmium, iron and tin, respectively. In all analyzed samples, the cadmium and tin contents were lower than the permissible maximum levels for these metals in canned foods in the Brazilian legislation.
Copyright © 2016. Published by Elsevier B.V.

Entities:  

Keywords:  Cadmium; Canned foods; HR-CS GF AAS; Iron; Simultaneous determination; Tin

Mesh:

Substances:

Year:  2016        PMID: 27130088     DOI: 10.1016/j.talanta.2016.02.023

Source DB:  PubMed          Journal:  Talanta        ISSN: 0039-9140            Impact factor:   6.057


  7 in total

1.  Sensitive determination of cadmium using solidified floating organic drop microextraction-slotted quartz tube-flame atomic absorption spectroscopy.

Authors:  Erhan Akkaya; Dotse Selali Chormey; Sezgin Bakırdere
Journal:  Environ Monit Assess       Date:  2017-09-20       Impact factor: 2.513

2.  Dual determination of nitrite and iron by a single greener sequential injection spectrophotometric system employing a simple single aqueous extract from Areca catechu Linn. serving as a natural reagent.

Authors:  Kraingkrai Ponhong; Watsaka Siriangkhawut; Chang Young Lee; Norio Teshima; Kate Grudpan; Sam-Ang Supharoek
Journal:  RSC Adv       Date:  2022-07-11       Impact factor: 4.036

3.  Exposure to Toxic Metals and Health Risk Assessment through Ingestion of Canned Sardines Sold in Brazil.

Authors:  Luana Carolina Santos Leite; Nayara Vieira de Lima; Elaine Silva de Pádua Melo; Carla Maiara Lopes Cardozo; Valter Aragão do Nascimento
Journal:  Int J Environ Res Public Health       Date:  2022-06-23       Impact factor: 4.614

4.  Determination of Non-Transferrin Bound Iron, Transferrin Bound Iron, Drug Bound Iron and Total Iron in Serum in a Rats after IV Administration of Sodium Ferric Gluconate Complex by Simple Ultrafiltration Inductively Coupled Plasma Mass Spectrometric Detection.

Authors:  Murali K Matta; Christopher R Beekman; Adarsh Gandhi; Suresh Narayanasamy; Christopher D Thomas; Adil Mohammad; Sharron Stewart; Lin Xu; Ashok Chockalingam; Katherine Shea; Vikram Patel; Rodney Rouse
Journal:  Nanomaterials (Basel)       Date:  2018-02-11       Impact factor: 5.076

5.  Speciation determination of iron and its spatial and seasonal distribution in coastal river.

Authors:  Yun Zhu; Xueping Hu; Dawei Pan; Haitao Han; Mingyue Lin; Yan Lu; Chenchen Wang; Rilong Zhu
Journal:  Sci Rep       Date:  2018-02-07       Impact factor: 4.379

Review 6.  Traditional Calibration Methods in Atomic Spectrometry and New Calibration Strategies for Inductively Coupled Plasma Mass Spectrometry.

Authors:  Jake A Carter; Ariane I Barros; Joaquim A Nóbrega; George L Donati
Journal:  Front Chem       Date:  2018-11-13       Impact factor: 5.221

Review 7.  Hydroxypyridinone-Based Metal Chelators towards Ecotoxicity: Remediation and Biological Mechanisms.

Authors:  M Amélia Santos; Anna Irto; Péter Buglyó; Sílvia Chaves
Journal:  Molecules       Date:  2022-03-18       Impact factor: 4.411

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.