Antibiofouling Polyvinylidene Fluoride Membrane Modified by Quaternary Ammonium Compound: Direct Contact-Killing versus Induced Indirect Contact-Killing.

Widespread applications of membrane technology call for the development of antibiofouling membranes. For the traditional contact-killing strategy, the antibacterial action is restricted to the surface: the membrane loses its antibiofouling efficacy once its surface is completely covered with a fouling layer. However, in this study, polyvinylidene fluoride (PVDF) microfiltration membranes blended with quaternary ammonium compound (QAC) exhibited a surprisingly lasting antimicrobial activity in the vicinity of the membrane surface. The results indicated that QAC was capable of driving surface segregation with a high structural stability, and the QAC modified membrane shows clear antibacterial effects against both Gram-positive and Gram-negative bacteria. Covering the modified membrane surface by an abiotic alginate layer resulted in a loss of antibacterial efficiency by 86.2%. In contrast, the antibacterial efficiency was maintained after developing a biofilm of Staphylococcus aureus of 30 μm in thickness. The current study may suggest that bacteria affected by contact-killing might interact with other bacteria in the vicinity, resulting in retarded biofilm growth. The antibiofouling effect and associated mechanism of the QAC modified membrane were further validated in a membrane bioreactor during long-term operation.