Literature DB >> 27086098

Development of a microfluidic paper-based analytical device for the determination of salivary aldehydes.

Adlin N Ramdzan1, M Inês G S Almeida1, Michael J McCullough2, Spas D Kolev3.   

Abstract

A low cost, disposable and easy to use microfluidic paper-based analytical device (μPAD) was developed for simple and non-invasive determination of total aldehydes in saliva with a potential to be used in epidemiological studies to assess oral cancer risk. The μPAD is based on the colour reaction between aldehydes (e.g. acetaldehyde, formaldehyde), 3-methyl-2-benzothiazolinone hydrazone (MBTH) and iron(III) to form an intense blue coloured formazan dye. The newly developed μPAD has a 3D design with two overlapping paper layers. The first layer comprises 15 circular detection zones (8 mm in diameter), each impregnated with 8 μL of MBTH, while the second layer contains 15 reagent zones (4 mm in diameter). Two μL of iron(III) chloride are added to each one of the second layer zones after the addition of sample to the detection zones in the first layer. All hydrophilic zones of the μPAD are defined by wax printing using a commercial wax printer. Due to the 2-step nature of the analytical reaction, the two paper layers are separated by a cellulose acetate interleaving sheet to allow for the reaction between the aldehydes in the saliva sample with MBTH to proceed first with the formation of an azine, followed by a blue coloured reaction between the azine and the oxidized by iron(III) form of MBTH, produced after the removal of the interleaving sheet. After obtaining a high resolution image of the detection side zone of the device using a flatbed scanner, the intensity of the blue colour within each detection zone is measured with Image J software. Under optimal conditions, the μPAD is characterised by a working range of 20.4-114.0 μM, limit of detection of 6.1 μM, and repeatability, expressed as RSD, of less than 12.7% (n = 5). There is no statistically significant difference at the 95% confidence level between the results obtained by the μPAD and the reference method (Student's t-test: 0.090 < 0.38). The optimized μPAD is stable for more than 41 days when stored in a freezer (≤-20 °C).
Copyright © 2016 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  3-methyl-2-benzothiazolinone hydrazone (MBTH); Aldehydes; Microfluidic paper-based analytical device (μPAD); Saliva; Wax printing

Mesh:

Substances:

Year:  2016        PMID: 27086098     DOI: 10.1016/j.aca.2016.03.030

Source DB:  PubMed          Journal:  Anal Chim Acta        ISSN: 0003-2670            Impact factor:   6.558


  4 in total

1.  New microfluidic paper-based analytical device for iron determination in urine samples.

Authors:  Francisca T S M Ferreira; Karina A Catalão; Raquel B R Mesquita; António O S S Rangel
Journal:  Anal Bioanal Chem       Date:  2021-10-15       Impact factor: 4.142

2.  Fabrication of paper microfluidic devices using a toner laser printer.

Authors:  James S Ng; Michinao Hashimoto
Journal:  RSC Adv       Date:  2020-08-12       Impact factor: 3.361

3.  Development of Paper-Based Analytical Devices for Minimizing the Viscosity Effect in Human Saliva.

Authors:  Julaluk Noiphung; Michael P Nguyen; Chamindie Punyadeera; Yunxia Wan; Wanida Laiwattanapaisal; Charles S Henry
Journal:  Theranostics       Date:  2018-06-13       Impact factor: 11.556

Review 4.  Application of Microfluidic Chip Technology in Food Safety Sensing.

Authors:  Hongwei Gao; Chunlei Yan; Wei Wu; Juan Li
Journal:  Sensors (Basel)       Date:  2020-03-24       Impact factor: 3.576

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.