Literature DB >> 26975601

High Failure Rate of Modular Exchange With a Specific Design of a Constrained Liner in High-Risk Patients Undergoing Revision Total Hip Arthroplasty.

Brian P Chalmers1, Diren Arsoy1, Rafael J Sierra1, David G Lewallen1, Robert T Trousdale1.   

Abstract

BACKGROUND: Addressing recurrent instability in patients with poor bone stock and inadequate abductor tensioning remains a challenge in revision total hip arthroplasty. One treatment method is implantation of a constrained liner. The purpose of this study was to determine clinical outcomes, redislocation rate, and revisions of a focally constrained liner in a high-risk patient cohort.
METHODS: Fifty-eight hips between 2008 and 2011 underwent implantation of a focally constrained liner. Nineteen were placed concurrent with acetabular component revision and 39 were placed into a well-fixed acetabular shell. Mean age was 69 years and mean number of previous ipsilateral hip surgeries was 4.2. At mean follow-up of 3.5 years, we analyzed clinical outcomes, redislocation, and revisions.
RESULTS: Mean Harris Hip Scores was 74. Fourteen hips (24%) were revised and 3 hips (5%) required reoperation at final follow-up. Eleven hips (19%) redislocated at a mean time to dislocation of 12.2 months; 31% (11 of 36 patients) that underwent modular exchange specifically for instability redislocated. Risk factors for redislocation included number of previous surgeries (P = .013), implantation of a 28 mm femoral head (hazards ratio 12.8), revision indication of instability (P = .04), and modular exchange with constrained liner implantation without acetabular shell revision (P = .01).
CONCLUSION: Implantation of a focally constrained liner in revision total hip arthroplasty for recurrent instability has a high failure rate, especially with a modular exchange. Although concurrent acetabular revision had a lower redislocation rate, the decision to revise a well-fixed cup should be weighed with potential complications associated with cup revision.
Copyright © 2016 Elsevier Inc. All rights reserved.

Entities:  

Keywords:  cemented liner; constrained liner; dislocation; instability; modular exchange; revision total hip arthroplasty

Mesh:

Year:  2016        PMID: 26975601     DOI: 10.1016/j.arth.2016.02.021

Source DB:  PubMed          Journal:  J Arthroplasty        ISSN: 0883-5403            Impact factor:   4.757


  5 in total

1.  CORR Insights(®): Low Frequency of Early Complications With Dual-mobility Acetabular Cups in Cementless Primary THA.

Authors:  Miguel E Cabanela
Journal:  Clin Orthop Relat Res       Date:  2016-05-25       Impact factor: 4.176

2.  Can Dislocation of a Constrained Liner Be Salvaged With Dual-mobility Constructs in Revision THA?

Authors:  Brian P Chalmers; Graham D Pallante; Michael J Taunton; Rafael J Sierra; Robert T Trousdale
Journal:  Clin Orthop Relat Res       Date:  2018-02       Impact factor: 4.176

Review 3.  Risk of revision and dislocation in single, dual mobility and large femoral head total hip arthroplasty: systematic review and network meta-analysis.

Authors:  Kwanchai Pituckanotai; Alisara Arirachakaran; Harit Tuchinda; Chinundorn Putananon; Nitiphol Nualsalee; Kittipong Setrkraising; Jatupon Kongtharvonskul
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-11-08

4.  Tripolar Constrained and Dual Mobility Liners Are Both Successful When Cemented Into Tantalum Acetabular Revision Shells in Complex Revision Total Hip Arthroplasty.

Authors:  Joaquin Valenzuela; Neil R Bergman; Richard Hiscock
Journal:  Arthroplast Today       Date:  2022-02-23

5.  Use of a Constrained Acetabular Liner to Prevent and Treat Recurrent Dislocation after Total Hip Replacement Arthroplasty.

Authors:  Joo Hyoun Song; Won Hwan Kwon; Seung-Bae Oh; Kyoung Ho Moon
Journal:  Orthop Surg       Date:  2020-10-25       Impact factor: 2.071

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.