Literature DB >> 26963588

Self-Limiting Oxides on WSe2 as Controlled Surface Acceptors and Low-Resistance Hole Contacts.

Mahito Yamamoto1, Shu Nakaharai1, Keiji Ueno2, Kazuhito Tsukagoshi1.   

Abstract

Transition metal oxides show much promise as effective p-type contacts and dopants in electronics based on transition metal dichalcogenides. Here we report that atomically thin films of under-stoichiometric tungsten oxides (WOx with x < 3) grown on tungsten diselenide (WSe2) can be used as both controlled charge transfer dopants and low-barrier contacts for p-type WSe2 transistors. Exposure of atomically thin WSe2 transistors to ozone (O3) at 100 °C results in self-limiting oxidation of the WSe2 surfaces to conducting WOx films. WOx-covered WSe2 is highly hole-doped due to surface electron transfer from the underlying WSe2 to the high electron affinity WOx. The dopant concentration can be reduced by suppressing the electron affinity of WOx by air exposure, but exposure to O3 at room temperature leads to the recovery of the electron affinity. Hence, surface transfer doping with WOx is virtually controllable. Transistors based on WSe2 covered with WOx show only p-type conductions with orders of magnitude better on-current, on/off current ratio, and carrier mobility than without WOx, suggesting that the surface WOx serves as a p-type contact with a low hole Schottky barrier. Our findings point to a simple and effective strategy for creating p-type devices based on two-dimensional transition metal dichalcogenides with controlled dopant concentrations.

Entities:  

Keywords:  Layered transition metal dichalcogenides; field effect transistors; hole injection; p-type doping; tungsten diselenide; tungsten oxides

Year:  2016        PMID: 26963588     DOI: 10.1021/acs.nanolett.6b00390

Source DB:  PubMed          Journal:  Nano Lett        ISSN: 1530-6984            Impact factor:   11.189


  6 in total

1.  P-type electrical contacts for 2D transition-metal dichalcogenides.

Authors:  Yan Wang; Jong Chan Kim; Yang Li; Kyung Yeol Ma; Seokmo Hong; Minsu Kim; Hyeon Suk Shin; Hu Young Jeong; Manish Chhowalla
Journal:  Nature       Date:  2022-08-01       Impact factor: 69.504

Review 2.  Defect Engineering in 2D Materials: Precise Manipulation and Improved Functionalities.

Authors:  Jie Jiang; Tao Xu; Junpeng Lu; Litao Sun; Zhenhua Ni
Journal:  Research (Wash D C)       Date:  2019-12-02

3.  All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration.

Authors:  Maheswari Sivan; Yida Li; Hasita Veluri; Yunshan Zhao; Baoshan Tang; Xinghua Wang; Evgeny Zamburg; Jin Feng Leong; Jessie Xuhua Niu; Umesh Chand; Aaron Voon-Yew Thean
Journal:  Nat Commun       Date:  2019-11-15       Impact factor: 14.919

4.  Melt Blown Fiber-Assisted Solvent-Free Device Fabrication at Low-Temperature.

Authors:  Minjong Lee; Joohoon Kang; Young Tack Lee
Journal:  Micromachines (Basel)       Date:  2020-12-10       Impact factor: 2.891

5.  Ab-initio investigation of preferential triangular self-formation of oxide heterostructures of monolayer [Formula: see text].

Authors:  Soumya Ranjan Das; Katsunori Wakabayashi; Kazuhito Tsukagoshi; Sudipta Dutta
Journal:  Sci Rep       Date:  2020-12-10       Impact factor: 4.379

6.  Electronic properties of MoS2/MoOx interfaces: Implications in Tunnel Field Effect Transistors and Hole Contacts.

Authors:  Santosh K C; Roberto C Longo; Rafik Addou; Robert M Wallace; Kyeongjae Cho
Journal:  Sci Rep       Date:  2016-09-26       Impact factor: 4.379

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.