S O'Toole1, D W Bartlett1, R Moazzez2. 1. Prosthodontic Department, King's College London, London, UK. 2. Mucosal and Salivary Biology Division/Restorative Dentistry Department, King's College London, London, UK.
Abstract
BACKGROUND: Application of fluoride mouthrinse before an acidic challenge may decrease enamel erosion. This paper compares the efficacy of stannous (SnF2 ) and sodium (NaF) fluoride when facing single and multiple erosive cycles in vitro. METHODS:Human enamel samples (N = 60) were randomly assigned to groups testing SnF2 and NaF mouthrinses (225 p.p.m.) and a water control. Samples were allocated into subgroups testing one or five erosive cycles. Samples were immersed in test solution for 1 min prior to citric acid immersion (0.3%, pH 3.2, 10 min), and the cycle repeated either one or five times. Analysis was done using profilometry and microhardness change. RESULTS: After one cycle, SnF2 resulted in least step height followed by NaF and water (1.3 μm (0.63), 2.3 μm (0.39), 4.3 μm (0.41) respectively; P < 0.0001). After five cycles SnF2 continued to reduce step height but pre-application of NaF was no different to water (4.6 μm (0.7), 10.5 μm (1.1) and 11.1 μm (0.38) respectively; P < 0.0001). There were no statistical differences in microhardness change between fluorides. After one erosive cycle, fluoride application resulted in statistically softer enamel compared with water. CONCLUSIONS: Both SnF2 and NaF reduced erosion after one cycle. After five cycles, SnF2 continued to offer protection whereas NaF was statistically comparable with water. Softening of enamel may not imply less erosion has occurred.
RCT Entities:
BACKGROUND: Application of fluoride mouthrinse before an acidic challenge may decrease enamel erosion. This paper compares the efficacy of stannous (SnF2 ) and sodium (NaF) fluoride when facing single and multiple erosive cycles in vitro. METHODS:Human enamel samples (N = 60) were randomly assigned to groups testing SnF2 and NaF mouthrinses (225 p.p.m.) and a water control. Samples were allocated into subgroups testing one or five erosive cycles. Samples were immersed in test solution for 1 min prior to citric acid immersion (0.3%, pH 3.2, 10 min), and the cycle repeated either one or five times. Analysis was done using profilometry and microhardness change. RESULTS: After one cycle, SnF2 resulted in least step height followed by NaF and water (1.3 μm (0.63), 2.3 μm (0.39), 4.3 μm (0.41) respectively; P < 0.0001). After five cycles SnF2 continued to reduce step height but pre-application of NaF was no different to water (4.6 μm (0.7), 10.5 μm (1.1) and 11.1 μm (0.38) respectively; P < 0.0001). There were no statistical differences in microhardness change between fluorides. After one erosive cycle, fluoride application resulted in statistically softer enamel compared with water. CONCLUSIONS: Both SnF2 and NaF reduced erosion after one cycle. After five cycles, SnF2 continued to offer protection whereas NaF was statistically comparable with water. Softening of enamel may not imply less erosion has occurred.
Authors: A Kensche; J Kirsch; S Mintert; F Enders; S Pötschke; S Basche; B König; C Hannig; M Hannig Journal: Sci Rep Date: 2017-11-29 Impact factor: 4.379