Literature DB >> 26791108

Nanostructured Ir-supported on Ti4O7 as a cost-effective anode for proton exchange membrane (PEM) electrolyzers.

Li Wang1, Philipp Lettenmeier1, Ute Golla-Schindler2, Pawel Gazdzicki1, Natalia A Cañas1, Tobias Morawietz3, Renate Hiesgen3, S Schwan Hosseiny1, Aldo S Gago1, K Andreas Friedrich4.   

Abstract

PEM water electrolysis has recently emerged as one of the most promising technologies for large H2 production from a temporal surplus of renewable electricity; yet it is expensive, partly due to the use of large amounts of Ir present in the anode. Here we report the development and characterization of a cost-effective catalyst, which consists of metallic Ir nanoparticles supported on commercial Ti4O7. The catalyst is synthesized by reducing IrCl3 with NaBH4 in a suspension containing Ti4O7, cetyltrimethylammonium bromide (CTAB) and anhydrous ethanol. No thermal treatment was applied afterwards in order to preserve the high conductivity of Ti4O7 and the metallic properties of Ir. Electron microscopy images show an uniform distribution of mostly single Ir particles covering the electro-ceramic support, although some agglomerates are still present. X-ray diffraction (XRD) analysis reveals a cubic face centered structure of Ir nanoparticles with a crystallite size of ca. 1.8 nm. According to X-ray photoelectron spectroscopy (XPS), the ratio of metallic Ir and Ir-oxide, identified as Ir(3+), is 3 : 1 after the removal of surface contamination. Other surface properties such as primary particle size distribution and surface potential were determined by atomic force microscopy (AFM). Cyclic and linear voltammetric measurements were conducted to study the electrochemical surface and kinetics of Ir-black and Ir/Ti4O7. The developed catalyst outperforms the commercial Ir-black in terms of mass activity for the oxygen evolution reaction (OER) in acid medium by a factor of four, measured at 0.25 V overpotential and room temperature. In general, the Ir/Ti4O7 catalyst exhibits improved kinetics and higher turnover frequency (TOF) compared to Ir-black. The developed Ir/Ti4O7 catalyst allows reducing the precious metal loading in the anode of a PEM electrolyzer by taking advantage of the use of an electro-ceramic support.

Entities:  

Year:  2016        PMID: 26791108     DOI: 10.1039/c5cp05296c

Source DB:  PubMed          Journal:  Phys Chem Chem Phys        ISSN: 1463-9076            Impact factor:   3.676


  5 in total

1.  Highly active nano-sized iridium catalysts: synthesis and operando spectroscopy in a proton exchange membrane electrolyzer.

Authors:  P Lettenmeier; J Majchel; L Wang; V A Saveleva; S Zafeiratos; E R Savinova; J-J Gallet; F Bournel; A S Gago; K A Friedrich
Journal:  Chem Sci       Date:  2018-02-20       Impact factor: 9.825

2.  Low-Cost Bipolar Plates of Ti4O7-Coated Ti for Water Electrolysis with Polymer Electrolyte Membranes.

Authors:  Hiroaki Wakayama; Kiyoshi Yamazaki
Journal:  ACS Omega       Date:  2021-02-01

3.  Low-Cost and Durable Bipolar Plates for Proton Exchange Membrane Electrolyzers.

Authors:  P Lettenmeier; R Wang; R Abouatallah; B Saruhan; O Freitag; P Gazdzicki; T Morawietz; R Hiesgen; A S Gago; K A Friedrich
Journal:  Sci Rep       Date:  2017-03-15       Impact factor: 4.379

4.  Systematic Study of Effective Hydrothermal Synthesis to Fabricate Nb-Incorporated TiO2 for Oxygen Reduction Reaction.

Authors:  So Yoon Lee; Daiki Numata; Ai Serizawa; Koudai Sasaki; Kaito Fukushima; Xiulan Hu; Takahiro Ishizaki
Journal:  Materials (Basel)       Date:  2022-02-22       Impact factor: 3.623

5.  IrW nanochannel support enabling ultrastable electrocatalytic oxygen evolution at 2 A cm-2 in acidic media.

Authors:  Rui Li; Haiyun Wang; Fei Hu; K C Chan; Xiongjun Liu; Zhaoping Lu; Jing Wang; Zhibin Li; Longjiao Zeng; Yuanyuan Li; Xiaojun Wu; Yujie Xiong
Journal:  Nat Commun       Date:  2021-06-10       Impact factor: 14.919

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.