| Literature DB >> 26774671 |
Peter Goshulak1, Saeid Samiezadeh2, Mina S R Aziz3, Habiba Bougherara2, Radovan Zdero4, Emil H Schemitsch1.
Abstract
Short-stem hip implants are increasingly common since they preserve host bone stock and presumably reduce stress shielding by improving load distribution in the proximal femur. Stress shielding may lead to decreased bone density, implant loosening, and fracture. However, few biomechanical studies have examined short-stem hip implants. The purpose of this study was to compare short-stem vs. standard length stemmed implants for stress shielding effects due to anteversion-retroversion, anterior-posterior position, and modular neck offset. Twelve artificial femurs were implanted with either a short-stem modular-neck implant or a conventional length monolithic implant in 0° or 15° of anteversion. Three modular neck options were tested in the short-stem implants. Three control femurs remained intact. Femurs were mounted in adduction and subjected to axial loading. Strain gauge values were collected to validate a Finite Element (FE) model, which was used to simulate the full range of physiologically possible anteversion and anterior-posterior combinations (n = 25 combinations per implant). Calcar stress was compared between implants and across each implant's range of anteversion using one and two-way ANOVA. Stress shielding was defined as the overall change in stress compared to an intact femur. The FE model compared well with experimental strains (intact: slope = 0.898, R = 0.943; short-stem: slope = 0.731, R = 0.948; standard-stem: slope = 0.743, R = 0.859); correction factors were used to adjust slopes to unity. No implant anteversion showed significant reduction in stress shielding (α = 0.05, p > 0.05). Stress shielding was significantly higher in the standard-stem implant (63% change from intact femur, p < 0.001) than in short-stem implants (29-39% change, p < 0.001). Short-stem implants reduce stress shielding compared to standard length stemmed implants, while implant anteversion and anterior-posterior position had no effect. Therefore, short-stem implants have a greater likelihood of maintaining calcar bone strength in the long term.Entities:
Keywords: Biomechanics; Finite element analysis; Hip arthroplasty; Short-stem; Stress shielding
Mesh:
Year: 2016 PMID: 26774671 DOI: 10.1016/j.medengphy.2015.12.005
Source DB: PubMed Journal: Med Eng Phys ISSN: 1350-4533 Impact factor: 2.242