Tomonori Baba1, Yasuhiro Homma2, Hidenori Ochi2, Yu Ozaki2, Mikio Matsumoto2, Katsuo Shitoto3, Kazuo Kaneko2. 1. Department of Orthopedic Surgery, Juntendo University School of Medicine, 2-1-1 Hongo, Bunkyo-ku, Tokyo, Japan. tobaba@juntendo.ac.jp. 2. Department of Orthopedic Surgery, Juntendo University School of Medicine, 2-1-1 Hongo, Bunkyo-ku, Tokyo, Japan. 3. Department of Orthopedic Surgery, Juntendo Urayasu Hospital, Chiba, Japan.
Abstract
INTRODUCTION: Clinical outcomes of total hip arthroplasty (THA) to treat rapidly destructive coxarthrosis (RDC) have been reported, but to our knowledge, there have been no studies comparing implants. The aim of this study was to examine the effectiveness of acetabular reconstruction for RDC by comparing the clinical results of THA using a Kerboull-type plate with an uncemented cup. PATIENTS AND METHODS: Among 921 primary THAs performed between 2006 and 2014, 27 were performed for the treatment for RDC using a Kerboull-type plate or a conventional uncemented cup. A Kerboull-type plate for acetabular reinforcement device was used in 13 hips and an uncemented cup in 14 hips. The mean follow-up period was 61.2 months. RESULTS: The duration of surgery was 156.8 ± 36.4 min in the Kerboull-type plate group and 103.3 ± 14.4 min in the uncemented cup group, being significantly longer in the former (P = 0.0002). In the Kerboull-type plate group and the uncemented cup group, the 5-year survival rates were 100 and 83.9 %, respectively. Recurrent dislocation was observed in two cases in which the posterior approach had been used. CONCLUSIONS: In our study, the loosening of the acetabular components was noted in 14.3 % of uncemented cup-applied cases, but no loosening was noted in any Kerboull-type plate-applied case. Therefore, for RDC, in which objective evaluation of fragile bone quality is difficult, the use of the Kerboull-type plate, which disperses weight-bearing of the acetabular, may be an effective means to achieve early functional recovery as well as a long-term favorable outcome.
INTRODUCTION: Clinical outcomes of total hip arthroplasty (THA) to treat rapidly destructive coxarthrosis (RDC) have been reported, but to our knowledge, there have been no studies comparing implants. The aim of this study was to examine the effectiveness of acetabular reconstruction for RDC by comparing the clinical results of THA using a Kerboull-type plate with an uncemented cup. PATIENTS AND METHODS: Among 921 primary THAs performed between 2006 and 2014, 27 were performed for the treatment for RDC using a Kerboull-type plate or a conventional uncemented cup. A Kerboull-type plate for acetabular reinforcement device was used in 13 hips and an uncemented cup in 14 hips. The mean follow-up period was 61.2 months. RESULTS: The duration of surgery was 156.8 ± 36.4 min in the Kerboull-type plate group and 103.3 ± 14.4 min in the uncemented cup group, being significantly longer in the former (P = 0.0002). In the Kerboull-type plate group and the uncemented cup group, the 5-year survival rates were 100 and 83.9 %, respectively. Recurrent dislocation was observed in two cases in which the posterior approach had been used. CONCLUSIONS: In our study, the loosening of the acetabular components was noted in 14.3 % of uncemented cup-applied cases, but no loosening was noted in any Kerboull-type plate-applied case. Therefore, for RDC, in which objective evaluation of fragile bone quality is difficult, the use of the Kerboull-type plate, which disperses weight-bearing of the acetabular, may be an effective means to achieve early functional recovery as well as a long-term favorable outcome.
Entities:
Keywords:
Kerboull-type plate; Rapidly destructive coxarthrosis; Total hip arthroplasty; Uncemented acetabular component
Authors: Maximilian Haenle; Sybille Schlüter; Martin Ellenrieder; Wolfram Mittelmeier; Rainer Bader Journal: Hip Int Date: 2013 Jan-Feb Impact factor: 2.135