Literature DB >> 26728285

Fractionation and leachability of heavy metals from aged and recent Zn metallurgical leach residues from the Três Marias zinc plant (Minas Gerais, Brazil).

Manivannan Sethurajan1,2,3, David Huguenot4, Piet N L Lens5, Heinrich A Horn6, Luiz H A Figueiredo7, Eric D van Hullebusch8.   

Abstract

Various mineral processing operations to produce pure metals from mineral ores generate sludges, residues, and other unwanted by-products/wastes. As a general practice, these wastes are either stored in a reservoir or disposed in the surrounding of mining/smelting areas, which might cause adverse environmental impacts. Therefore, it is important to understand the various characteristics like heavy metal leaching features and potential toxicity of these metallurgical wastes. In this study, zinc plant leach residues (ZLRs) were collected from a currently operating Zn metallurgical industry located in Minas Gerais (Brazil) and investigated for their potential toxicity, fractionation, and leachability. Three different ZLR samples (ZLR1, ZLR2, and ZLR3) were collected, based on their age of production and deposition. They mainly consisted of Fe (6-11.5 %), Zn (2.5 to 5.0 %), and Pb (1.5 to 2.5 %) and minor concentrations of Al, Cd, Cu, and Mn, depending on the sample age. Toxicity Characteristic Leaching Procedure (TCLP) results revealed that these wastes are hazardous for the environment. Accelerated Community Bureau of Reference (BCR) sequential extraction clearly showed that potentially toxic heavy metals such as Cd, Cu, Pb, and Zn can be released into the environment in high quantities under mild acidic conditions. The results of the liquid-solid partitioning as a function of pH showed that pH plays an important role in the leachability of metals from these residues. At low pH (pH 2.5), high concentrations of metals can be leached: 67, 25, and 7 % of Zn can be leached from leach residues ZLR1, ZLR2, and ZLR3, respectively. The release of metals decreased with increasing pH. Geochemical modeling of the pH-dependent leaching was also performed to determine which geochemical process controls the leachability/solubility of the heavy metals. This study showed that the studied ZLRs contain significant concentrations of non-residual extractable fractions of Zn and can be seen as a potential secondary resource for Zn.

Entities:  

Keywords:  Geochemical modeling; Metal fractionation; TCLP; Zinc plant leach residues; pH stat leaching

Mesh:

Substances:

Year:  2016        PMID: 26728285     DOI: 10.1007/s11356-015-6014-1

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  19 in total

1.  Evaluation of performance of time-saving extraction devices in the BCR three-step sequential extraction procedure.

Authors:  I Ipolyi; C Brunori; C Cremisini; P Fodor; L Macaluso; R Morabito
Journal:  J Environ Monit       Date:  2002-08

2.  Comparative evaluation of short-term leach tests for heavy metal release from mineral processing waste.

Authors:  Souhail R Al-Abed; Philip L Hageman; G Jegadeesan; Narain Madhavan; Derrick Allen
Journal:  Sci Total Environ       Date:  2005-12-05       Impact factor: 7.963

Review 3.  Is there a future for sequential chemical extraction?

Authors:  Jeffrey R Bacon; Christine M Davidson
Journal:  Analyst       Date:  2007-09-26       Impact factor: 4.616

4.  Leaching behavior of mineral processing waste: comparison of batch and column investigations.

Authors:  Souhail R Al-Abed; G Jegadeesan; J Purandare; D Allen
Journal:  J Hazard Mater       Date:  2007-09-21       Impact factor: 10.588

5.  Assessment of long-term leaching from waste incineration air-pollution-control residues.

Authors:  T Astrup; H Mosbaek; T H Christensen
Journal:  Waste Manag       Date:  2006-02-20       Impact factor: 7.145

6.  MINTEQ modeling for evaluating the leaching behavior of heavy metals in MSWI fly ash.

Authors:  Yan Zhang; Jianguo Jiang; Maozhe Chen
Journal:  J Environ Sci (China)       Date:  2008       Impact factor: 5.565

7.  Use of fly ash, phosphogypsum and red mud as a liner material for the disposal of hazardous zinc leach residue waste.

Authors:  Semra Coruh; Osman Nuri Ergun
Journal:  J Hazard Mater       Date:  2009-08-31       Impact factor: 10.588

8.  "Acid extractable" metal concentrations in solid matrices: a comparison and evaluation of operationally defined extraction procedures and leaching tests.

Authors:  Valérie Cappuyns; Rudy Swennen
Journal:  Talanta       Date:  2008-02-02       Impact factor: 6.057

9.  The influence of pH on the leaching behaviour of inorganic components from municipal solid waste APC residues.

Authors:  Margarida J Quina; João C M Bordado; Rosa M Quinta-Ferreira
Journal:  Waste Manag       Date:  2009-07-09       Impact factor: 7.145

10.  The pH-dependent leaching of inorganic contaminants from secondary lead smelter fly ash.

Authors:  Martina Vítková; Vojtech Ettler; Ondrej Sebek; Martin Mihaljevic; Tomás Grygar; Jan Rohovec
Journal:  J Hazard Mater       Date:  2009-01-14       Impact factor: 10.588

View more
  2 in total

1.  A two-step leaching method designed based on chemical fraction distribution of the heavy metals for selective leaching of Cd, Zn, Cu, and Pb from metallurgical sludge.

Authors:  Fen Wang; Junxia Yu; Wanli Xiong; Yuanlai Xu; Ru-An Chi
Journal:  Environ Sci Pollut Res Int       Date:  2017-11-03       Impact factor: 4.223

2.  High Manganese Tolerance and Biooxidation Ability of Serratia marcescens Isolated from Manganese Mine Water in Minas Gerais, Brazil.

Authors:  Natália R Barboza; Mônica M C A Morais; Pollyana S Queiroz; Soraya S Amorim; Renata Guerra-Sá; Versiane A Leão
Journal:  Front Microbiol       Date:  2017-10-09       Impact factor: 5.640

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.