Applying Cross-Pin System in Both Femoral and Tibial Fixation in Anterior Cruciate Ligament Reconstruction Using Hamstring Tendons.

Use of the RigidFix Cross Pin System (DePuy Mitek, Raynham, MA) is a popular technique for femoral fixation of grafts in anterior cruciate ligament reconstruction (ACLR). However, tibial fixation is still limited to the use of interference screws and post fixation, and few surgeons apply the femoral RigidFix system in tibial fixation. Meanwhile, tunnel enlargement is still a problem that affects the outcome of ACLR with hamstring grafts. We have used the femoral RigidFix system in femoral and tibial fixation. The rod top of the guide frame should be placed under the level of the subchondral bone at the proximal end of the tibial tunnel to ensure that the pins will not be inserted into the joint. The pins are inserted through the center of the lateral tibia. Using our technique, the fixation points of the femur and tibia are close to the anterior cruciate ligament insertions, and full contact of the graft with the tunnel wall can be accomplished. On the basis of our preliminary observations and investigation, we are optimistic about the prospect of performing ACLR using the RigidFix system in femoral and tibial fixation.