Literature DB >> 26688422

Physical and chemical properties of an antimicrobial Bis-GMA free dental resin with quaternary ammonium dimethacrylate monomer.

Qi-Ting Huang1, Jing-Wei He2, Zheng-Mei Lin3, Fang Liu4, Lippo V J Lassila5, Pekka K Vallittu6.   

Abstract

The objective of this study was to evaluate the antibacterial activity, physicochemical properties of the quaternary ammonium dimethacrylate monomer N,N-bis[2-(3-(methacryloyloxy)propanamido)-ethyl]-N-methylhexadecyl ammonium bromide (IMQ-16) containing diurethane dimethacrylate (UDMA)/tricyclodecane dimethanol diacrylate (SR833s) resin system and compare with bisphenylglycidyl dimethacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) resin system. It was hypothesized that the physical and chemical properties of the experimental polymers would be comparable with Bis-GMA/TEGDMA polymer and IMQ-16 monomer could endow the UDMA/SR833s resin with antibacterial activity. Double bond conversion (DC) was measured using Fourier transform infrared spectroscopy (FTIR). Mechanical properties including flexural strength (FS) and flexural modulus (FM) were measured by three-point bending test with bars of 2mm×2mm×25mm. Water sorption (WS) and solubility (WSL) were also investigated. Antibacterial activity of obtained polymers against Streptococcus mutans Ingbitt (S. mutans) was tested through direct contact test (DCT). The presence of antibacterial activity due to soluble components was also investigated by agar diffusion test (ADT). All of the polymers containing IMQ-16 exhibited improvements in WS and WSL, while maintaining equivalent DC and FS relative to the Bis-GMA/TEGDMA control system. Incorporation of 17% and 20% of IMQ-16 into UDMA/SR833s resin reduced the viable counts of S. mutans after incubation on the surface of the materials and produced no inhibition zones around the cured discs in ADT. UDMA/SR833s resin system is promising to formulate an antibacterial polymer with equivalent or even higher physicochemical properties relative to Bis-GMA/TEGDMA formulation. IMQ-16 is capable to endow UDMA/SR833s resin system with significant antibacterial activity when the mass ratio is 17% or 20%.
Copyright © 2015 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Antibacterial activity; Dental resin; Dimathacrylate; Physicochemical properties; Polymer

Mesh:

Substances:

Year:  2015        PMID: 26688422     DOI: 10.1016/j.jmbbm.2015.10.028

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN: 1878-0180


  8 in total

1.  Development of a novel resin-based dental material with dual biocidal modes and sustained release of Ag+ ions based on photocurable core-shell AgBr/cationic polymer nanocomposites.

Authors:  Weiwei Cao; Yu Zhang; Xi Wang; Yinyan Chen; Qiang Li; Xiaodong Xing; Yuhong Xiao; Xuefeng Peng; Zhiwen Ye
Journal:  J Mater Sci Mater Med       Date:  2017-05-22       Impact factor: 3.896

2.  Novel Antibacterial Copolymers Based on Quaternary Ammonium Urethane-Dimethacrylate Analogues and Triethylene Glycol Dimethacrylate.

Authors:  Marta W Chrószcz; Izabela M Barszczewska-Rybarek; Alicja Kazek-Kęsik
Journal:  Int J Mol Sci       Date:  2022-04-29       Impact factor: 6.208

3.  Effect of low-shrinkage monomers on the physicochemical properties of experimental composite resin.

Authors:  Jingwei He; Sufyan Garoushi; Pekka K Vallittu; Lippo Lassila
Journal:  Acta Biomater Odontol Scand       Date:  2018-02-28

4.  Synthesis, Antifungal Activity, and Cytotoxicity of AgBr-NP@CTMAB Hybrid and Its Application in PMMA.

Authors:  Qiao-Jun Zhang; Yue Liu; Wen-Ting Zhang; Jing-Jing Huang; Hao-Hong Li; You-Guang Lu; Ming Zheng; Da-Li Zheng
Journal:  Int J Nanomedicine       Date:  2021-04-29

5.  Characterization of the Mechanical Properties, Water Sorption, and Solubility of Antibacterial Copolymers of Quaternary Ammonium Urethane-Dimethacrylates and Triethylene Glycol Dimethacrylate.

Authors:  Marta W Chrószcz-Porębska; Izabela M Barszczewska-Rybarek; Grzegorz Chladek
Journal:  Materials (Basel)       Date:  2022-08-11       Impact factor: 3.748

6.  Antibacterial activity of a modified unfilled resin containing a novel polymerizable quaternary ammonium salt MAE-HB.

Authors:  Li Huang; Fan Yu; Xiang Sun; Yan Dong; Ping-Ting Lin; Hao-Han Yu; Yu-Hong Xiao; Zhi-Guo Chai; Xiao-Dong Xing; Ji-Hua Chen
Journal:  Sci Rep       Date:  2016-09-23       Impact factor: 4.379

7.  Drug resistance of oral bacteria to new antibacterial dental monomer dimethylaminohexadecyl methacrylate.

Authors:  Suping Wang; Haohao Wang; Biao Ren; Xiaodong Li; Lin Wang; Han Zhou; Michael D Weir; Xuedong Zhou; Radi M Masri; Thomas W Oates; Lei Cheng; Hockin H K Xu
Journal:  Sci Rep       Date:  2018-04-03       Impact factor: 4.379

Review 8.  Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance.

Authors:  Yang Jiao; Li-Na Niu; Sai Ma; Jing Li; Franklin R Tay; Ji-Hua Chen
Journal:  Prog Polym Sci       Date:  2017-03-12       Impact factor: 29.190

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.