Literature DB >> 26655080

The Impact of Nitinol Staples on the Compressive Forces, Contact Area, and Mechanical Properties in Comparison to a Claw Plate and Crossed Screws for the First Tarsometatarsal Arthrodesis.

Amiethab Aiyer1, Nicholas A Russell1, Matthew H Pelletier1, Mark Myerson1, William R Walsh2.   

Abstract

UNLABELLED: Background The optimal fixation method for the first tarsometatarsal arthrodesis remains controversial. This study aimed to develop a reproducible first tarsometatarsal testing model to evaluate the biomechanical performance of different reconstruction techniques. Methods Crossed screws or a claw plate were compared with a single or double shape memory alloy staple configuration in 20 Sawbones models. Constructs were mechanically tested in 4-point bending to 1, 2, and 3 mm of plantar displacement. The joint contact force and area were measured at time zero, and following 1 and 2 mm of bending. Peak load, stiffness, and plantar gapping were determined. Results Both staple configurations induced a significantly greater contact force and area across the arthrodesis than the crossed screw and claw plate constructs at all measurements. The staple constructs completely recovered their plantar gapping following each test. The claw plate generated the least contact force and area at the joint interface and had significantly greater plantar gapping than all other constructs. The crossed screw constructs were significantly stiffer and had significantly less plantar gapping than the other constructs, but this gapping was not recoverable. Conclusions Crossed screw fixation provides a rigid arthrodesis with limited compression and contact footprint across the joint. Shape memory alloy staples afford dynamic fixation with sustained compression across the arthrodesis. A rigid polyurethane foam model provides an anatomically relevant comparison for evaluating the interface between different fixation techniques. Clinical Relevance The dynamic nature of shape memory alloy staples offers the potential to permit early weight bearing and could be a useful adjunctive device to impart compression across an arthrodesis of the first tarsometatarsal joint. LEVELS OF EVIDENCE: Therapeutic, Level V: Bench testing.
© 2015 The Author(s).

Entities:  

Keywords:  Lapidus; biomechanical; nitinol; sawbone; staple

Mesh:

Substances:

Year:  2015        PMID: 26655080     DOI: 10.1177/1938640015620655

Source DB:  PubMed          Journal:  Foot Ankle Spec        ISSN: 1938-6400


  3 in total

1.  Biomechanical comparison of continuous compression implants versus tension band fixation for transverse olecranon fractures.

Authors:  Morgan Moon; Kyle Schweser; Will Bezold; James L Cook
Journal:  J Orthop       Date:  2022-09-28

2.  Outcomes of Nitinol Compression Staples in Tarsometatarsal Fusion.

Authors:  Carissa C Dock; Katie L Freeman; J Chris Coetzee; Rebecca Stone McGaver; M Russell Giveans
Journal:  Foot Ankle Orthop       Date:  2020-08-20

3.  Biomechanical evaluation of shape-memory alloy staples for internal fixation-an in vitro study.

Authors:  QiCai Jason Hoon; Matthew H Pelletier; Chris Christou; Kenneth A Johnson; William R Walsh
Journal:  J Exp Orthop       Date:  2016-08-30
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.