PURPOSE: To compare the currently available ultraviolet-A (UV-A) corneal cross-linking (CXL) treatment protocols for thin corneas with respect to oxygen, UV fluence, and osmotic pressure. METHODS: Freshly enucleated murine (n = 16) and porcine (n = 16) eyes were used. The dependency on oxygen and the amount of UV absorption were evaluated using different CXL protocols, including standard CXL, contact lens-assisted CXL (caCXL), and CXL after corneal swelling. The CXL protocol was adapted from the treatment parameters of the human cornea to fit the thickness of murine and porcine corneas. Immediately after CXL, the corneas were subjected to biomechanical testing, including preconditioning, stress relaxation at 0.6 MPa, and stress-strain extensiometry. A two-element Prony series was fitted to the relaxation curves for viscoelastic characterization. RESULTS: Standard CXL was most efficient; prior corneal swelling reduced the long-term modulus by 6% and caCXL by 15% to 20%. Oxygen reduction decreased the long-term modulus G∞ by 14% to 15% and the instantaneous modulus G0 by 2% to 5%, and increased the short-term modulus G2 by 22% to 31%. Reducing the amount of absorbed UV energy decreased the long-term modulus G∞ by 5% to 34%, the instantaneous modulus G0 by 7% to 29%, and the short-term modulus G2 by 17% to 20%. The amount of absorbed UV light was more important in porcine than in murine corneas. CONCLUSIONS: The higher oxygen availability in thin corneas potentially increases the overall efficacy of riboflavin UV-A CXL compared to corneas of standard thickness. Clinical protocols for thin corneas should be revised to implement these findings. Copyright 2015, SLACK Incorporated.
PURPOSE: To compare the currently available ultraviolet-A (UV-A) corneal cross-linking (CXL) treatment protocols for thin corneas with respect to oxygen, UV fluence, and osmotic pressure. METHODS: Freshly enucleated murine (n = 16) and porcine (n = 16) eyes were used. The dependency on oxygen and the amount of UV absorption were evaluated using different CXL protocols, including standard CXL, contact lens-assisted CXL (caCXL), and CXL after corneal swelling. The CXL protocol was adapted from the treatment parameters of the human cornea to fit the thickness of murine and porcine corneas. Immediately after CXL, the corneas were subjected to biomechanical testing, including preconditioning, stress relaxation at 0.6 MPa, and stress-strain extensiometry. A two-element Prony series was fitted to the relaxation curves for viscoelastic characterization. RESULTS: Standard CXL was most efficient; prior corneal swelling reduced the long-term modulus by 6% and caCXL by 15% to 20%. Oxygen reduction decreased the long-term modulus G∞ by 14% to 15% and the instantaneous modulus G0 by 2% to 5%, and increased the short-term modulus G2 by 22% to 31%. Reducing the amount of absorbed UV energy decreased the long-term modulus G∞ by 5% to 34%, the instantaneous modulus G0 by 7% to 29%, and the short-term modulus G2 by 17% to 20%. The amount of absorbed UV light was more important in porcine than in murine corneas. CONCLUSIONS: The higher oxygen availability in thin corneas potentially increases the overall efficacy of riboflavin UV-A CXL compared to corneas of standard thickness. Clinical protocols for thin corneas should be revised to implement these findings. Copyright 2015, SLACK Incorporated.